问题
I am testing our server-application (written Java) on different operating systems and thought that OpenSolaris (2008.11) would be the least troublesome due to the nice Java integration. Turns out I was wrong, as I end up with a UnknownHostException
try {
computerName = InetAddress.getLocalHost().getHostName();
if (computerName.indexOf(".") > -1)
computerName = computerName.substring(0,
computerName.indexOf(".")).toUpperCase();
} catch (UnknownHostException e) {
e.printStackTrace();
}
The output is:
java.net.UnknownHostException: desvearth01: desvearth01
at java.net.InetAddress.getLocalHost(InetAddress.java:1353)
However, nslookup desvearth01
returns the correct IP address, and nslookup localhost
returns 127.0.0.1
as expected. Also, the same code works perfectly on FreeBSD. Is there anything special to OpenSolaris that I am not aware of?
Any hints appreciated, thanks.
回答1:
In good tradition I can answer my own question once again:
It seems that InetAddress.getLocalHost()
ignores the /etc/resolv.conf but only looks at the /etc/hosts file (where I hadn't specified anything besides localhost). Adding the IP and hostname to this file solves the problem and the exception is gone.
Above answer is almost correct and I got hint from above and my problem get resolved...Thanks.
But to improve this, I am adding steps-by-steps changes, so that it will be helpfull for even naive users.
Steps:
Open /etc/hosts, the entries might look like below.
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
you need to add one more line above of this by any editor like vi or gedit.
<your-machine-ip> <your-machine-name> localhost
eg.192.168.1.73 my_foo localhost
Now, overall file may look like this:
192.168.1.73 my_foo localhost
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
- Just save it and run again your java...code your work is done.
回答2:
I use NetworkInterface.getNetworkInterfaces() as a fall back for when InetAddress.getLocalHost() throws an UnknownHostException. Here's the code (without exception handling for clarity).
Enumeration<NetworkInterface> iterNetwork;
Enumeration<InetAddress> iterAddress;
NetworkInterface network;
InetAddress address;
iterNetwork = NetworkInterface.getNetworkInterfaces();
while (iterNetwork.hasMoreElements())
{
network = iterNetwork.nextElement();
if (!network.isUp())
continue;
if (network.isLoopback()) // If I want loopback, I would use "localhost" or "127.0.0.1".
continue;
iterAddress = network.getInetAddresses();
while (iterAddress.hasMoreElements())
{
address = iterAddress.nextElement();
if (address.isAnyLocalAddress())
continue;
if (address.isLoopbackAddress())
continue;
if (address.isMulticastAddress())
continue;
return(address.getHostAddress());
}
}
回答3:
On my amazon instance I was having the same issue, there was default DNS configuration issue. So to fix the issue I had done these steps -
get your host name
$hostname
ip-10-122-16-169
ping to hostname
$ping ip-10-122-16-169
ping: unknown host ip-10-122-16-169
cat /etc/hosts file, you will get something like
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost6 localhost6.localdomain6
now you just need to append your host name at the end of the fist line, so when you append it will look like
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ip-10-122-16-169
::1 localhost6 localhost6.localdomain6
now you're ready to go, to check ping again the same hostname
$ping ip-10-122-16-169
PING localhost (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=255 time=0.018 ms
64 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=255 time=0.024 ms
回答4:
Host lookups on Solaris uses /etc/nsswitch.conf
so depending on what the 'hosts:' line says it determines if /etc/hosts
, NIS, DNS and/or LDAP should be consulted.
If you only use hosts and DNS you should have this in /etc/nsswitch.conf
:
hosts: files dns
The reason nslookup desvearth01
works is because the nslookup
command directly consults /etc/resolv.conf
. If you want to do a better command line test, use the command:
getent hosts desvearth01
回答5:
This errors shows up when I changed the workstation name and tried start Glassfish 2. You also must rename the entry at /etc/hosts, something like this:
127.0.0.1 localhost
127.0.1.1 MyNewName
回答6:
Checkout /etc/hostname then put your hostname to hosts file.
回答7:
If you see this message than you need set hostname WITH hostname superhost.domain
COMMAND!
After this, check which /etc/hosts
file contain string like this 127.0.0.1 localhost
.
Also, check that command uname -a
returns something like this:
Linux superhost.domain 2.6.38-8-server #42-Ubuntu SMP Mon Apr 11 03:49:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
NOT LIKE THIS!!!!
Linux (none) 2.6.38-8-server #42-Ubuntu SMP Mon Apr 11 03:49:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
回答8:
Another option is in this post (in fact, what is in your /etc/sysconfig/network file for your hostname...by changing it to an FQDN name fixes this issue).
java getLocalHost() UnknownHostException /etc/hosts file differs linux api?
回答9:
I am having issues around this as well. I need to do further testing, but it looks like
NetworkInterface.getNetworkInterfaces()
can be more reliable. I think that this does not do the lookup, but just grabs the IP.
I am using it as the 'next best' when the getLocalHost()
fails.
来源:https://stackoverflow.com/questions/1881546/inetaddress-getlocalhost-throws-unknownhostexception