问题
I want to use an IP camera with webrtc. However webrtc seems to support only webcams. So I try to convert the IP camera's stream to a virtual webcam.
I found software like IP Camera Adapter, but they don't work well (2-3 frames per second and delay of 2 seconds) and they work only on Windows, I prefer use Linux (if possible).
I try ffmpeg/avconv:
firstly, I created a virtual device with v4l2loopback (the command was:
sudo modprobe v4l2loopback). The virtual device is detected and can be feed with a video (.avi) with a command like:ffmpeg -re -i testsrc.avi -f v4l2 /dev/video1the stream from the IP camera is available with:
rtsp://IP/play2.sdpfor a Dlink DCS-5222L camera. This stream can be captured by ffmpeg.
My problem is to make the link between these two steps (receive the rstp stream and write it to the virtual webcam). I tried ffmpeg -re -i rtsp://192.168.1.16/play2.sdp -f video4linux2 -input_format mjpeg -i /dev/video0 but there is an error with v4l2 (v4l2 not found).
Does anyones has an idea how to use an IP camera with webRTC?
回答1:
Short answer is, no. RTSP is not mentioned in the IETF standard for WebRTC and no browser currently has plans to support it. Link to Chrome discussion.
Longer answer is that if you are truly sold out on this idea, you will have to build a webrtc gateway/breaker utilizing the native WebRTC API.
- Start a WebRTC session between you browser and your breaker
- Grab the IP Camera feed with your gateway/breaker
- Encrypt and push the rtp stream to your WebRTC session from your RTSP stream gathered by the breaker through the WebRTC API.
This is how others have done it and how it will have to be done.
UPDATE 7/30/2014:
I have experimented with the janus-gateway and I believe the streaming plugin does EXACTLY this as it can grab an rtp stream and push it to an webrtc peer. For RTSP, you could probably create RTSP client(possibly using a library like gstreamer), then push the RTP and RTCP from the connection to the WebRTC peer.
回答2:
Janus-gateway recently added a simple RTSP support (based on libcurl) to its streaming plugins since this commit
Then it is possible to configure the gateway to negotiate RTSP with the camera and relay the RTP thought WebRTC adding in the streaming plugins configuration <prefix>/etc/janus/janus.plugin.streaming.cfg
[camera]
type = rtsp
id = 99
description = Dlink DCS-5222L camera
audio = no
video = yes
url=rtsp://192.168.1.16/play2.sdp
Next you will be able to access to the WebRTC stream using the streaming demo page http://..../demos/streamingtest.html
回答3:
I have created a simple example transforming a RTSP or HTTP video feed into a WebRTC stream. This example is based on Kurento Media Server (KMS) and requires having it installed for the example to work.
Install KMS and enjoy ...
https://github.com/lulop-k/kurento-rtsp2webrtc
UPDATE 22-09-2015. Check this post for a technical explanation on why transcoding is just part of the solution to this problem.
回答4:
If you have video4linux installed, the following command will create a virtual webcam from an rtsp stream:
gst-launch rtspsrc location=rtsp://192.168.2.18/play.spd ! decodebin ! v4l2sink device=/dev/video1
You were on the right track, the "decodebin" was the missing link.
回答5:
For those who would like to get their hands dirty with some native-WebRTC, read on...
You could try streaming an IP camera’s RTSP stream through a simple ffmpeg-webrtc wrapper: https://github.com/TekuConcept/WebRTCExamples .
It uses the VideoCaptureModule and AudioDeviceModule abstract classes to inject raw media. Under the hood, these abstract classes are extended for all platform-specific hardware like video4linux or alsa-audio.
The wrapper uses the ffmpeg CLI tools, but I don’t feel it should be too difficult to use the ffmpeg C-libraries themself. (The wrapper relies on transcoding, or decoding the source media, and then letting WebRTC re-encode with respect to the ICE connections’ requirements. Still working out pre-encoded media pass-through.)
来源：https://stackoverflow.com/questions/23461914/use-an-ip-camera-with-webrtc