问题
I have a mutual TLS enabled Istio mesh. My setup is as follows
- A service running inside a pod (Service container + envoy)
- An envoy gateway which stays in front of the above service. An Istio Gateway and Virtual Service attached to this. It routes
/info/
route to the above service. - Another Istio Gateway configured for ingress using the default istio ingress pod. This also has Gateway+Virtual Service combination. The virtual service directs
/info/
path to the service described in 2
I'm attempting to access the service from the ingress gateway using a curl command such as:
$ curl -X GET http://istio-ingressgateway.istio-system:80/info/ -H "Authorization: Bearer $token" -v
But I'm getting a 503 not found error as below:
$ curl -X GET http://istio-ingressgateway.istio-system:80/info/ -H "Authorization: Bearer $token" -v
Note: Unnecessary use of -X or --request, GET is already inferred.
* Trying 10.105.138.94...
* Connected to istio-ingressgateway.istio-system (10.105.138.94) port 80 (#0)
> GET /info/ HTTP/1.1
> Host: istio-ingressgateway.istio-system
> User-Agent: curl/7.47.0
> Accept: */*
> Authorization: Bearer ...
>
< HTTP/1.1 503 Service Unavailable
< content-length: 57
< content-type: text/plain
< date: Sat, 12 Jan 2019 13:30:13 GMT
< server: envoy
<
* Connection #0 to host istio-ingressgateway.istio-system left intact
I checked the logs of istio-ingressgateway
pod and the following line was logged there
[2019-01-13T05:40:16.517Z] "GET /info/ HTTP/1.1" 503 UH 0 19 6 - "10.244.0.5" "curl/7.47.0" "da02fdce-8bb5-90fe-b422-5c74fe28759b" "istio-ingressgateway.istio-system" "-"
If I logged into istio ingress pod and attempt to send the request with curl, I get a successful 200 OK.
# curl hr--gateway-service.default/info/ -H "Authorization: Bearer $token" -v
Also, I managed to get a successful response for the same curl command when the mesh was created in mTLS disabled mode. There are no conflicts shown in mTLS setup.
Here are the config details for my service mesh in case you need additional info.
Pods
$ kubectl get pods --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
default hr--gateway-deployment-688986c87c-z9nkh 1/1 Running 0 37m
default hr--hr-deployment-596946948d-c89bn 2/2 Running 0 37m
default hr--sts-deployment-694d7cff97-gjwdk 1/1 Running 0 37m
ingress-nginx default-http-backend-6586bc58b6-8qss6 1/1 Running 0 42m
ingress-nginx nginx-ingress-controller-6bd7c597cb-t4rwq 1/1 Running 0 42m
istio-system grafana-85dbf49c94-lfpbr 1/1 Running 0 42m
istio-system istio-citadel-545f49c58b-dq5lq 1/1 Running 0 42m
istio-system istio-cleanup-secrets-bh5ws 0/1 Completed 0 42m
istio-system istio-egressgateway-7d59954f4-qcnxm 1/1 Running 0 42m
istio-system istio-galley-5b6449c48f-72vkb 1/1 Running 0 42m
istio-system istio-grafana-post-install-lwmsf 0/1 Completed 0 42m
istio-system istio-ingressgateway-8455c8c6f7-5khtk 1/1 Running 0 42m
istio-system istio-pilot-58ff4d6647-bct4b 2/2 Running 0 42m
istio-system istio-policy-59685fd869-h7v94 2/2 Running 0 42m
istio-system istio-security-post-install-cqj6k 0/1 Completed 0 42m
istio-system istio-sidecar-injector-75b9866679-qg88s 1/1 Running 0 42m
istio-system istio-statsd-prom-bridge-549d687fd9-bspj2 1/1 Running 0 42m
istio-system istio-telemetry-6ccf9ddb96-hxnwv 2/2 Running 0 42m
istio-system istio-tracing-7596597bd7-m5pk8 1/1 Running 0 42m
istio-system prometheus-6ffc56584f-4cm5v 1/1 Running 0 42m
istio-system servicegraph-5d64b457b4-jttl9 1/1 Running 0 42m
kube-system coredns-78fcdf6894-rxw57 1/1 Running 0 50m
kube-system coredns-78fcdf6894-s4bg2 1/1 Running 0 50m
kube-system etcd-ubuntu 1/1 Running 0 49m
kube-system kube-apiserver-ubuntu 1/1 Running 0 49m
kube-system kube-controller-manager-ubuntu 1/1 Running 0 49m
kube-system kube-flannel-ds-9nvf9 1/1 Running 0 49m
kube-system kube-proxy-r868m 1/1 Running 0 50m
kube-system kube-scheduler-ubuntu 1/1 Running 0 49m
Services
$ kubectl get svc --all-namespaces
NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
default hr--gateway-service ClusterIP 10.100.238.144 <none> 80/TCP,443/TCP 39m
default hr--hr-service ClusterIP 10.96.193.43 <none> 80/TCP 39m
default hr--sts-service ClusterIP 10.99.54.137 <none> 8080/TCP,8081/TCP,8090/TCP 39m
default kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 52m
ingress-nginx default-http-backend ClusterIP 10.109.166.229 <none> 80/TCP 44m
ingress-nginx ingress-nginx NodePort 10.108.9.180 192.168.60.3 80:31001/TCP,443:32315/TCP 44m
istio-system grafana ClusterIP 10.102.141.231 <none> 3000/TCP 44m
istio-system istio-citadel ClusterIP 10.101.128.187 <none> 8060/TCP,9093/TCP 44m
istio-system istio-egressgateway ClusterIP 10.102.157.204 <none> 80/TCP,443/TCP 44m
istio-system istio-galley ClusterIP 10.96.31.251 <none> 443/TCP,9093/TCP 44m
istio-system istio-ingressgateway LoadBalancer 10.105.138.94 <pending> 80:31380/TCP,443:31390/TCP,31400:31400/TCP,15011:31219/TCP,8060:31482/TCP,853:30034/TCP,15030:31544/TCP,15031:32652/TCP 44m
istio-system istio-pilot ClusterIP 10.100.170.73 <none> 15010/TCP,15011/TCP,8080/TCP,9093/TCP 44m
istio-system istio-policy ClusterIP 10.104.77.184 <none> 9091/TCP,15004/TCP,9093/TCP 44m
istio-system istio-sidecar-injector ClusterIP 10.100.180.152 <none> 443/TCP 44m
istio-system istio-statsd-prom-bridge ClusterIP 10.107.39.50 <none> 9102/TCP,9125/UDP 44m
istio-system istio-telemetry ClusterIP 10.110.55.232 <none> 9091/TCP,15004/TCP,9093/TCP,42422/TCP 44m
istio-system jaeger-agent ClusterIP None <none> 5775/UDP,6831/UDP,6832/UDP 44m
istio-system jaeger-collector ClusterIP 10.102.43.21 <none> 14267/TCP,14268/TCP 44m
istio-system jaeger-query ClusterIP 10.104.182.189 <none> 16686/TCP 44m
istio-system prometheus ClusterIP 10.100.0.70 <none> 9090/TCP 44m
istio-system servicegraph ClusterIP 10.97.65.37 <none> 8088/TCP 44m
istio-system tracing ClusterIP 10.109.87.118 <none> 80/TCP 44m
kube-system kube-dns ClusterIP 10.96.0.10 <none> 53/UDP,53/TCP 52m
Gateway and virtual service described in point 2
$ kubectl describe gateways.networking.istio.io hr--gateway
Name: hr--gateway
Namespace: default
API Version: networking.istio.io/v1alpha3
Kind: Gateway
Metadata:
...
Spec:
Selector:
App: hr--gateway
Servers:
Hosts:
*
Port:
Name: http2
Number: 80
Protocol: HTTP2
Hosts:
*
Port:
Name: https
Number: 443
Protocol: HTTPS
Tls:
Mode: PASSTHROUGH
$ kubectl describe virtualservices.networking.istio.io hr--gateway
Name: hr--gateway
Namespace: default
Labels: app=hr--gateway
Annotations: <none>
API Version: networking.istio.io/v1alpha3
Kind: VirtualService
Metadata:
...
Spec:
Gateways:
hr--gateway
Hosts:
*
Http:
Match:
Uri:
Prefix: /info/
Rewrite:
Uri: /
Route:
Destination:
Host: hr--hr-service
Gateway and virtual service described in point 3
$ kubectl describe gateways.networking.istio.io ingress-gateway
Name: ingress-gateway
Namespace: default
Labels: <none>
Annotations: kubectl.kubernetes.io/last-applied-configuration={"apiVersion":"networking.istio.io/v1alpha3","kind":"Gateway","metadata":{"annotations":{},"name":"ingress-gateway","namespace":"default"},"spec":{"sel...
API Version: networking.istio.io/v1alpha3
Kind: Gateway
Metadata:
...
Spec:
Selector:
Istio: ingressgateway
Servers:
Hosts:
*
Port:
Name: http2
Number: 80
Protocol: HTTP2
$ kubectl describe virtualservices.networking.istio.io hr--gateway-ingress-vs
Name: hr--gateway-ingress-vs
Namespace: default
Labels: app=hr--gateway
API Version: networking.istio.io/v1alpha3
Kind: VirtualService
Metadata:
Spec:
Gateways:
ingress-gateway
Hosts:
*
Http:
Match:
Uri:
Prefix: /info/
Route:
Destination:
Host: hr--gateway-service
Events: <none>
回答1:
The problem is probably as follows: istio-ingressgateway initiates mTLS to hr--gateway-service on port 80, but hr--gateway-service expects plain HTTP connections.
There are multiple solutions:
- Define a DestinationRule to instruct clients to disable mTLS on calls to hr--gateway-service
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
name: hr--gateway-service-disable-mtls
spec:
host: hr--gateway-service.default.svc.cluster.local
trafficPolicy:
tls:
mode: DISABLE
- Instruct hr-gateway-service to accept mTLS connections. For that, configure the server TLS options on port 80 to be
MUTUAL
and to use Istio certificates and the private key. SpecifyserverCertificate
,caCertificates
andprivateKey
to be/etc/certs/cert-chain.pem
,/etc/certs/root-cert.pem
,/etc/certs/key.pem
, respectively.
来源:https://stackoverflow.com/questions/54160215/accessing-service-using-istio-ingress-gives-503-error-when-mtls-is-enabled