Programmatically prevent Windows screensaver from starting

问题

Is there a recommended way to prevent the Windows screensaver from starting? The closest thing I've found is this article, but what I would really like to do is just tell Windows that the computer isn't idle rather than fooling with the currently set screensaver values.

回答1:

For testing, I set the screensaver to 1 minute and required a password.

I tried capturing SC_SCREENSAVE and returning -1 in VB .Net. As commented, it works when there is no screensaver password but fails if the screensaver password is active. (I tried it in Windows XP). I also put this into a Timer's tick event, every 1000 milliseconds:

Static dir As Integer = 4
Cursor.Position = Cursor.Position + New Size(dir, dir)
dir = -dir

It doesn't work. The cursor jiggles back and forth and after 1 minute the screensaver flashes on for a short instance and then turns off. The screensaver turns on for only a moment, not long enough to require a password. But still, the flash is ugly.

Then I tried using user32.dll's SetCursorPos and GetCursorPos. You can look them up at pinvoke. Same result as above.

Then I peeked at the code of "JiggleMouse" mentioned elsewhere in this question. JiggleMouse uses SendInput. SendInput works! No flash of the screensaver. I put a call to SendInput inside of a Timer that triggers every 50 seconds (just less than the minimum screensaver timeout of 60 seconds). It's sufficient to move the mouse by a delta of 0,0, no real movement. That does work. The code to put in the Tick event:

Dim i(0) As INPUT
i(0).dwType = INPUT.InputType.INPUT_MOUSE
i(0).mkhi = New MOUSEKEYBDHARDWAREINPUT
i(0).mkhi.mi = New MOUSEINPUT
i(0).mkhi.mi.dx = 0
i(0).mkhi.mi.dy = 0
i(0).mkhi.mi.mouseData = 0
i(0).mkhi.mi.dwFlags = MOUSEINPUT.MouseEventFlags.MOUSEEVENTF_MOVE
i(0).mkhi.mi.time = 0
i(0).mkhi.mi.dwExtraInfo = IntPtr.Zero
SendInput(1, i(0), Marshal.SizeOf(i(0)))

This comes from pinvoke.com:

Public Declare Function SendInput Lib "user32" (ByVal nInputs As Integer, ByRef pInputs As INPUT, ByVal cbSize As Integer) As Integer

Public Structure INPUT
    Enum InputType As Integer
        INPUT_MOUSE = 0
        INPUT_KEYBOARD = 1
        INPUT_HARDWARE = 2
    End Enum

    Dim dwType As InputType
    Dim mkhi As MOUSEKEYBDHARDWAREINPUT
End Structure

Public Structure MOUSEINPUT
    Enum MouseEventFlags As Integer
        MOUSEEVENTF_MOVE = &H1
        MOUSEEVENTF_LEFTDOWN = &H2
        MOUSEEVENTF_LEFTUP = &H4
        MOUSEEVENTF_RIGHTDOWN = &H8
        MOUSEEVENTF_RIGHTUP = &H10
        MOUSEEVENTF_MIDDLEDOWN = &H20
        MOUSEEVENTF_MIDDLEUP = &H40
        MOUSEEVENTF_XDOWN = &H80
        MOUSEEVENTF_XUP = &H100
        MOUSEEVENTF_WHEEL = &H800
        MOUSEEVENTF_VIRTUALDESK = &H4000
        MOUSEEVENTF_ABSOLUTE = &H8000
    End Enum

    Dim dx As Integer
    Dim dy As Integer
    Dim mouseData As Integer
    Dim dwFlags As MouseEventFlags
    Dim time As Integer
    Dim dwExtraInfo As IntPtr
End Structure

Public Structure KEYBDINPUT
    Public wVk As Short
    Public wScan As Short
    Public dwFlags As Integer
    Public time As Integer
    Public dwExtraInfo As IntPtr
End Structure

Public Structure HARDWAREINPUT
    Public uMsg As Integer
    Public wParamL As Short
    Public wParamH As Short
End Structure

Const KEYEVENTF_EXTENDEDKEY As UInt32 = &H1
Const KEYEVENTF_KEYUP As UInt32 = &H2
Const KEYEVENTF_UNICODE As UInt32 = &H4
Const KEYEVENTF_SCANCODE As UInt32 = &H8
Const XBUTTON1 As UInt32 = &H1
Const XBUTTON2 As UInt32 = &H2

<StructLayout(LayoutKind.Explicit)> Public Structure MOUSEKEYBDHARDWAREINPUT
    <FieldOffset(0)> Public mi As MOUSEINPUT
    <FieldOffset(0)> Public ki As KEYBDINPUT
    <FieldOffset(0)> Public hi As HARDWAREINPUT
End Structure

回答2:

SystemParametersInfo

Specifically, the SPI_SETSCREENSAVEACTIVE parameter.

Does this not work? I was surprised that I did not see it here. Note that SetThreadExecutionState will not affect the screen saver at all, just the sleeping of the display.

回答3:

Subtle. The official way to tell Windows that the system is not idle is SetThreadExecutionState. This resets the idle timer, (or turns it off, if you pass ES_CONTINUOUS ). However, even though SetThreadExecutionState resets the idle timer, it does not stop the screensaver!

回答4:

I use Mouse Jiggler to reset the idle state. This gets around a Group Policy that tends to start my screensaver (and lock the machine) at inopportune times: when I'm reading a long document, studying a complex chunk of code, or talking/listening/not-constantly-typing during a meeting.

As it can be slightly annoying to have the mouse jump 1px diagonally every second, I intend to use AutoHotKey to write a script that does basically the same thing, but only after a configured keyboard/mouse idle timeout, and maybe use the Shift key (or Scroll Lock) instead of a mouse move.

回答5:

From MSDN:

Windows does not start the screen saver if any of the following conditions exist:

The active application is not a Windows-based application.

A CBT window is present.

The active application receives the WM_SYSCOMMAND message with the wParam parameter set to the SC_SCREENSAVE value, but it does not pass the message to the DefWindowProc function.

There's a caveat though:

Windows Vista and later: If password protection is enabled by policy, the screen saver is started regardless of what an application does with the SC_SCREENSAVE notification.

That seems to apply even if you use the SetThreadExecutionState with ES_CONTINUOUS.

So, if it weren't for the caveat, your choices would be:

SetThreadExecutionState with ES_CONTINUOUS (as described in other answers).
Put up a computer-based training window (which requires hooks).
Don't let the WM_SYSCOMMAND with SC_SCREENSAVE be passed onto DefWindowProc. (Assuming you care only when your application is the active application.)
Install a dongle that simulates mouse jiggle.

The last option is nice in that it works even with the password protection policy.

回答6:

Can't believe no one has pointed out the easy and obvious solution:

#include <windows.h>

void main()
{
   while(1){
      INPUT input;
      input.type = INPUT_MOUSE;
      input.mi.dx = 1;
      input.mi.dy = 1;
      input.mi.mouseData = 0;
      input.mi.dwFlags = MOUSEEVENTF_MOVE;
      input.mi.time = 0;
      input.mi.dwExtraInfo = 0;
      SendInput( 1, &input, sizeof(input) );
      sleep(60000);
   }
}

回答7:

This blog post details what you need to do in C++.

The actual code snippet from the website:

LRESULT CALLBACK WndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
  switch (uMsg)                  
  {
    case WM_SYSCOMMAND:
    {
      switch (wParam)
      {
        case SC_SCREENSAVE:  
          return 0;
        case SC_MONITORPOWER:
          return 0;      
      }
      break;      
    }

    case WM_CLOSE:                
    {
      PostQuitMessage(0);            
      return 0;        
    }
  }
  return DefWindowProc(hWnd,uMsg,wParam,lParam);

}

回答8:

In Windows 7+, use the Power Management API's PowerSetRequest() with PowerRequestDisplayRequired

https://msdn.microsoft.com/en-us/library/windows/desktop/dd405534(v=vs.85).aspx

In previous versions of windows, intercept the WM_SYSCOMMAND - SC_SCREENSAVE message as detailed in Eddie Parker's answer.

回答9:

You can use SystemParametersInfo to get the SCREENSAVETIMEOUT and then immediately set the timeout back to the same value. Do this periodically on a timer for as long as you want to prevent the screensaver from going on.

This has the effect of resetting the current countdown timer without actually changing the system setting.

You probably also want to call SetThreadExecutionState to affect the power as other answers mention.

回答10:

Just reset the timeout counter with

SystemParametersInfo(SPI_SETSCREENSAVEACTIVE, 1, nil, SPIF_SENDWININICHANGE);

回答11:

From JD Design Freeware - Flipss.exe (download 12kb) is a command line utility that will set SPI_SETSCREENSAVEACTIVE for you.

"FlipSS.exe -h" to see the current state.
"FlipSS.exe /on" to set the screensaver on.
"FlipSS.exe /off" to set the screensaver off.

回答12:

AutoHotkey can set SystemParametersInfo(SPI_SETSCREENSAVEACTIVE) with a 1-liner DllCall in script to easily accomplish this with a .ahk script.

AutoHotkey code to disable Screensaver:

DllCall("SystemParametersInfo", Int, 17, Int, 0, UInt, NULL, Int, 2)

AutoHotkey code to enable screensaver:

DllCall("SystemParametersInfo", Int, 17, Int, 1, UInt, NULL, Int, 2)

Reference Forum Threads:

F13Key - Toggling Screen Saver with SystemParametersInfo
SKAN - How to Disable Screen Saver Temporarily

来源：https://stackoverflow.com/questions/463813/programmatically-prevent-windows-screensaver-from-starting

标签

winapi

windows-vista

windows-xp

screensaver