问题
I am going to host an asp.net MVC 5 website (.net framework) on ubuntu server. The asp.net MVC 5 project that I am using is an asp.net MVC template from MonoDevelop. (Very simple project) I have used apache2 and installed mono based on this tutorial:
https://medium.com/@shrimpy/configure-apache2-mod-mono-to-run-asp-net-mvc5-application-on-ubuntu-14-04-314a700522b9?
but it doesn't work and it only shows the directories and files when I go to 127.0.0.1:80 Here is the page I face on the browser:
https://ibb.co/nLjYjZG
Here is my webapp.conf (which is /etc/apache2/site-available/webapp.conf):
<VirtualHost *:80>
ServerAdmin webmaster@localhost
ServerName kudutry.scm.cloudapp.net
MonoAutoApplication disabled
AddHandler mono .aspx ascx .asax .ashx .config .cs .asmx .axd
MonoApplications “/:/home/azureuser/webapp”
MonoServerPath kudutry.scm.cloudapp.net /usr/bin/mod-mono-server4
DocumentRoot /home/azureuser/webapp
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory “/home/azureuser/webapp”>
Options Indexes FollowSymLinks MultiViews
AllowOverride AuthConfig FileInfo
Order allow,deny
Allow from all
SetHandler mono
DirectoryIndex index.html
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory “/usr/lib/cgi-bin”>
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog /var/log/apache2/kudu-error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog /var/log/apache2/kudu-access.log combined
</VirtualHost>
Alias /scm “/home/azureuser/webapp”
# MonoServerPath can be changed to specify which version of ASP.NET is hosted
# mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0
# For SUSE Linux Enterprise Mono Extension, uncomment the line below:
# MonoServerPath scm “/opt/novell/mono/bin/mod-mono-server2”
# For Mono on openSUSE, uncomment the line below instead:
MonoServerPath scm “/usr/bin/mod-mono-server4”
# To obtain line numbers in stack traces you need to do two things:
# 1) Enable Debug code generation in your page by using the Debug=”true”
# page directive, or by setting <compilation debug=”true” /> in the
# application’s Web.config
# 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging
MonoDebug scm true
# The MONO_IOMAP environment variable can be configured to provide platform abstraction
# for file access in Linux. Valid values for MONO_IOMAP are:
# case
# drive
# all
# Uncomment the line below to alter file access behavior for the configured application
MonoSetEnv scm MONO_IOMAP=all
#
# Additional environtment variables can be set for this server instance using
# the MonoSetEnv directive. MonoSetEnv takes a string of ‘name=value’ pairs
# separated by semicolons. For instance, to enable platform abstraction *and*
# use Mono’s old regular expression interpreter (which is slower, but has a
# shorter setup time), uncomment the line below instead:
# MonoSetEnv scm MONO_IOMAP=all;MONO_OLD_RX=1
MonoApplications scm “/scm:/home/azureuser/webapp”
<Location “/scm”>
Allow from all
Order allow,deny
MonoSetServerAlias scm
SetHandler mono
SetOutputFilter DEFLATE
SetEnvIfNoCase Request_URI “\.(?:gif|jpe?g|png)$” no-gzip dont-vary
</Location>
<IfModule mod_deflate.c>
AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript
</IfModule>
Here is my mod_mono.conf (which is /etc/apache2/mod_mono.conf):
# mod_mono.conf
# Use 'include mod_mono.conf' from other configuration file
# to load mod_mono module.
<IfModule !mod_mono.c>
LoadModule mono_module /usr/libexec/apache2/mod_mono.so
</IfModule>
<IfModule mod_headers.c>
Header set X-Powered-By "Mono"
</IfModule>
AddType application/x-asp-net .aspx
AddType application/x-asp-net .asmx
AddType application/x-asp-net .ashx
AddType application/x-asp-net .asax
AddType application/x-asp-net .ascx
AddType application/x-asp-net .soap
AddType application/x-asp-net .rem
AddType application/x-asp-net .axd
AddType application/x-asp-net .cs
AddType application/x-asp-net .vb
AddType application/x-asp-net .master
AddType application/x-asp-net .sitemap
AddType application/x-asp-net .resources
AddType application/x-asp-net .skin
AddType application/x-asp-net .browser
AddType application/x-asp-net .webinfo
AddType application/x-asp-net .resx
AddType application/x-asp-net .licx
AddType application/x-asp-net .csproj
AddType application/x-asp-net .vbproj
AddType application/x-asp-net .config
AddType application/x-asp-net .Config
AddType application/x-asp-net .dll
DirectoryIndex index.aspx
DirectoryIndex Default.aspx
DirectoryIndex default.aspx
#DirectoryIndex Global.asax
# NOTE: I'm not sure why this is needed when the app paths are also defined in the MonoApplications section
Alias /MyApplicationName "/Library/WebServer/Documents/path-to-web-app-directory"
# MonoServerPath can be changed to specify which version of ASP.NET is hosted
# mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0
MonoServerPath MyApplicationName "/usr/bin/mod-mono-server4"
# To obtain line numbers in stack traces you need to do two things:
# 1) Enable Debug code generation in your page by using the Debug="true"
# page directive, or by setting <compilation debug="true" /> in the
# application's Web.config
# 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging
MonoDebug MyApplicationName true
# The MONO_IOMAP environment variable can be configured to provide platform abstraction
# for file access in Linux. Valid values for MONO_IOMAP are:
# case
# drive
# all
# Uncomment the line below to alter file access behavior for the configured application
MonoSetEnv MyApplicationName MONO_IOMAP=all
# Additional environtment variables can be set for this server instance using
# the MonoSetEnv directive. MonoSetEnv takes a string of 'name=value' pairs
# separated by semicolons. For instance, to enable platform abstraction *and*
# use Mono's old regular expression interpreter (which is slower, but has a
# shorter setup time), uncomment the line below instead:
# MonoSetEnv MyApplicationName MONO_IOMAP=all;MONO_OLD_RX=1
MonoApplications MyApplicationName "/MyApplicationName:/Library/WebServer/Documents/path-to-web-app-directory"
<Location "/MyApplicationName">
Allow from all
Order allow,deny
MonoSetServerAlias MyApplicationName
SetHandler mono
SetOutputFilter DEFLATE
SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary
</Location>
<IfModule mod_deflate.c>
AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript
</IfModule>
Here is my apache2.conf (/etc/apache2/apache2.conf)
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.
# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `-- ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
# together by including all remaining configuration files when starting up the
# web server.
#
# * ports.conf is always included from the main configuration file. It is
# supposed to determine listening ports for incoming connections which can be
# customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
# directories contain particular configuration snippets which manage modules,
# global configuration fragments, or virtual host configurations,
# respectively.
#
# They are activated by symlinking available configuration files from their
# respective *-available/ counterparts. These should be managed by using our
# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
# their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
# the default configuration, apache2 needs to be started/stopped with
# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
# work with the default configuration.
# Global configuration
#
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#Mutex file:${APACHE_LOCK_DIR} default
#
# The directory where shm and other runtime files will be stored.
#
DefaultRuntimeDir ${APACHE_RUN_DIR}
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 600
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn
# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf
# Include list of ports to listen on
Include ports.conf
# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
Options FollowSymLinks
AllowOverride None
Require all denied
</Directory>
<Directory /usr/share>
AllowOverride None
Require all granted
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<Directory /home/azureuser/webapp>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Require all denied
</FilesMatch>
#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf
# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
#Novataris added
Include /etc/apache2/mod_mono.conf
来源：https://stackoverflow.com/questions/56547027/apache-and-mono-cant-find-the-default-controller-and-show-the-homepage