问题
I can connect in any situation when using appr.tc ice servers (google turn servers). but i can't connect with my own turn server.
I did config my own turn server by coturn project.
I'm using google's libjingle_peerconnection api to create an Android Application that can perform video call.
When i run turn server:
<pre>
RFC 3489/5389/5766/5780/6062/6156 STUN/TURN Server
Version Coturn-4.5.0.5 'dan Eider'
0:
Max number of open files/sockets allowed for this process: 4096
0:
Due to the open files/sockets limitation,
max supported number of TURN Sessions possible is: 2000 (approximately)
0:
==== Show him the instruments, Practical Frost: ====
0: TLS supported
0: DTLS supported
0: DTLS 1.2 is not supported
0: TURN/STUN ALPN is not supported
0: Third-party authorization (oAuth) supported
0: GCM (AEAD) supported
0: OpenSSL compile-time version: OpenSSL 1.0.1e-fips 11 Feb 2013 (0x1000105f)
0:
0: SQLite is not supported
0: Redis is not supported
0: PostgreSQL is not supported
0: MySQL supported
0: MongoDB is not supported
0:
0: Default Net Engine version: 3 (UDP thread per CPU core)
=====================================================
0: Config file found: /usr/local/etc/turnserver.conf
0: Config file found: /usr/local/etc/turnserver.conf
0: Domain name:
0: Default realm: myserver.com
0:
CONFIGURATION ALERT: you specified long-term user accounts, (-u option)
but you did not specify the long-term credentials option
(-a or --lt-cred-mech option).
I am turning --lt-cred-mech ON for you, but double-check your configuration.
0: WARNING: cannot find certificate file: turn_server_cert.pem (1)
0: WARNING: cannot start TLS and DTLS listeners because certificate file is not set properly
0: WARNING: cannot find private key file: turn_server_pkey.pem (1)
0: WARNING: cannot start TLS and DTLS listeners because private key file is not set properly
0: NO EXPLICIT LISTENER ADDRESS(ES) ARE CONFIGURED
0: ===========Discovering listener addresses: =========
0: Listener address to use: 127.0.0.1
0: Listener address to use: 137.74.35.124
0: Listener address to use: ::1
0: =====================================================
0: Total: 1 'real' addresses discovered
0: =====================================================
0: NO EXPLICIT RELAY ADDRESS(ES) ARE CONFIGURED
0: ===========Discovering relay addresses: =============
0: Relay address to use: 137.74.35.124
0: Relay address to use: ::1
0: =====================================================
0: Total: 2 relay addresses discovered
0: =====================================================
0: pid file created: /var/run/turnserver.pid
0: IO method (main listener thread): epoll (with changelist)
0: Wait for relay ports initialization...
0: relay 137.74.35.124 initialization...
0: relay 137.74.35.124 initialization done
0: relay ::1 initialization...
0: relay ::1 initialization done
0: Relay ports initialization done
0: IO method (general relay thread): epoll (with changelist)
0: turn server id=0 created
0: IO method (general relay thread): epoll (with changelist)
0: turn server id=1 created
0: IPv4. TCP listener opened on : 127.0.0.1:3478
0: IPv4. TCP listener opened on : 127.0.0.1:3479
0: IPv4. TCP listener opened on : 137.74.35.124:3478
0: IPv4. TCP listener opened on : 137.74.35.124:3479
0: IPv6. TCP listener opened on : ::1:3478
0: IPv6. TCP listener opened on : ::1:3479
0: IPv4. TCP listener opened on : 127.0.0.1:3478
0: IPv4. TCP listener opened on : 127.0.0.1:3479
0: IPv4. TCP listener opened on : 137.74.35.124:3478
0: IPv4. TCP listener opened on : 137.74.35.124:3479
0: IPv6. TCP listener opened on : ::1:3478
0: IPv6. TCP listener opened on : ::1:3479
0: IPv4. UDP listener opened on: 127.0.0.1:3478
0: IPv4. UDP listener opened on: 127.0.0.1:3479
0: IPv4. UDP listener opened on: 137.74.35.124:3478
0: IPv4. UDP listener opened on: 137.74.35.124:3479
0: IPv6. UDP listener opened on: ::1:3478
0: IPv6. UDP listener opened on: ::1:3479
0: Total General servers: 2
0: IO method (auth thread): epoll (with changelist)
0: IO method (auth thread): epoll (with changelist)
0: IO method (admin thread): epoll (with changelist)
0: IPv4. CLI listener opened on : 127.0.0.1:5766
</pre>
When i call from peer A to B :
IP of a peer is 192.68.7.3 !!! Why?
<pre>
58: IPv4. tcp or tls connected to: 5.112.222.14:1358
58: session 001000000000000001: realm <myserver.com> user <>: incoming packet message processed, error 401: Unauthorized
58: session 001000000000000001: realm <myserver.com> user <>: incoming packet message processed, error 401: Unauthorized
58: IPv4. Local relay addr: 137.74.35.124:51937
58: session 001000000000000001: new, realm=<myserver.com>, username=<heydari>, lifetime=600
58: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet ALLOCATE processed, success
58: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet ALLOCATE processed, success
69: session 001000000000000001: peer 192.168.7.3 lifetime updated: 300
69: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet CREATE_PERMISSION processed, success
69: session 001000000000000001: peer 192.168.7.3 lifetime updated: 300
69: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet CREATE_PERMISSION processed, success
69: session 001000000000000001: peer 109.110.172.36 lifetime updated: 300
69: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet CREATE_PERMISSION processed, success
69: session 001000000000000001: peer 109.110.172.36 lifetime updated: 300
69: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet CREATE_PERMISSION processed, success
186: session 001000000000000001: refreshed, realm=<myserver.com>, username=<heydari>, lifetime=0
186: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet REFRESH processed, success
</pre>
When i call from peer B to peer A :
I don't see peers after realm lines !! why?
<pre>
188: handle_udp_packet: New UDP endpoint: local addr 137.74.35.124:3478, remote addr 5.112.222.14:1164
188: session 001000000000000001: realm <myserver.com> user <>: incoming packet BINDING processed, success
188: session 001000000000000001: realm <myserver.com> user <>: incoming packet message processed, error 401: Unauthorized
188: session 001000000000000001: realm <myserver.com> user <>: incoming packet BINDING processed, success
188: session 001000000000000001: realm <myserver.com> user <>: incoming packet message processed, error 401: Unauthorized
188: IPv4. Local relay addr: 137.74.35.124:57827
188: session 001000000000000001: new, realm=<myserver.com>, username=<heydari>, lifetime=600
188: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet ALLOCATE processed, success
188: IPv4. tcp or tls connected to: 5.112.222.14:1496
188: session 000000000000000001: realm <myserver.com> user <>: incoming packet message processed, error 401: Unauthorized
188: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet ALLOCATE processed, success
189: session 000000000000000001: realm <myserver.com> user <>: incoming packet message processed, error 401: Unauthorized
189: IPv4. Local relay addr: 137.74.35.124:52856
189: session 000000000000000001: new, realm=<myserver.com>, username=<heydari>, lifetime=600
189: session 000000000000000001: realm <myserver.com> user <heydari>: incoming packet ALLOCATE processed, success
189: session 000000000000000001: realm <myserver.com> user <heydari>: incoming packet ALLOCATE processed, success
198: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
199: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
209: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
209: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
219: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
219: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
229: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
229: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
239: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
239: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
249: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
249: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
260: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
260: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet BINDING processed, success
267: session 001000000000000001: refreshed, realm=<myserver.com>, username=<heydari>, lifetime=0
267: session 001000000000000001: realm <myserver.com> user <heydari>: incoming packet REFRESH processed, success
267: session 000000000000000001: refreshed, realm=<myserver.com>, username=<heydari>, lifetime=0
267: session 000000000000000001: realm <myserver.com> user <heydari>: incoming packet REFRESH processed, success
</pre>
I Can't establish successfull connection peers. Where is the problem?
When I use appr.tc turn servers I can call from and to each peers so i think my application is ok.
回答1:
Replace the domain to 137.74.35.124 it should work, I am hopeful to Ur coturn server is on public ip same as 137.74.35.124.
回答2:
You are using WebRTC. Relay candidate harvesting in WebRTC only works with credentials. You should add the following configuration to turnserver.config.
listening-ip=137.74.35.124
fingerprint
lt-cred-mech
user=guest:somepassword
realm=saladem.com
Use turn:137.74.35.124:3478 whith user guest and password somepassword. You can test it here: https://webrtc.github.io/samples/src/content/peerconnection/trickle-ice/
If the tests show relay candidates harvested but the connection still fails in your peers, then it can be that you are missing the external-internal ip mapping in the config file. I.e. your turn server is behind a NAT. Add:
external-ip=[your-external-ip]/[your-internal-ip]
to your turnserver.config.
There is a discussion on how to configurate the server for WebRTC use here: https://github.com/coturn/coturn/wiki/turnserver
来源：https://stackoverflow.com/questions/44996545/why-my-turn-server-doesnt-work