部署MYSQL高可用集群

mysql-day08 部署MYSQL高可用集群

u 集群架构

MHA 工作过程

• MHA Manager 会定时探测集群中的 master 节点,

当 master 出现故障时,它可以自动将最新数据的 sl

ave 提升为新的 master ,然后将所有其他的 slave

重新指向新的 master 。整个故障转移过程对应用程

序完全透明。

– ( 1 )从宕机崩溃的 master 保存二进制日志事件( binlog events)

– ( 2 )识别含有最新更新的 slave

– ( 3 )应用差异的中继日志( relay log )到其他的 slave

– ( 4 )应用从 master 保存的二进制日志事件( binlog events )

– ( 5 )提升一个 slave 为新的 master ;

– ( 6 )使其他的 slave 连接新的 master 进行复制;

u 准备环境

一、集群定义：使用多台服务提供相同的服务

二、高可用集群定义：主备模式，被客户端访问的称作主，当主宕机时，备用

服务器自动接收客户端访问。

拓扑结构

client

| -->vip 192.168.4.100 《51，52，53》

_____________________________________________________

||| ||| ||| || || || ||

master51 master(备)52 master(备)53 slave54 slave55 mgm56 Manager

一、配置所有数据节点主机之间可以互相以ssh密钥对方式认证登陆

二、配置manager56主机无密码ssh登录所有数据节点主机

三、配置主从同步,要求如下：

51主库开半同步复制

52从库（备用主库）开半同步复制

53从库（备用主库）开半同步复制

54从库不做备用主库所以不用开半同步复制

55从库不做备用主库所以不用开半同步复制

拓扑图

• 采用 5 个数据库服务器节点

u 步骤

注意：安装mariadb,就有mysql命令

1.在所有主机上安装perl软件包（51~56）

]#cd mha-soft-student

]#yum -y install perl-*.rpm

2.在所有主机上安装mha_node软件包（51~56）

yum -y install perl-DBD-mysql

rpm -ivh mha4mysql-node-0.56-0.el6.noarch.rpm

2.只在管理"主机56"上安装mha_manager软件包

]#yum -y install perl-ExtUtils-* perl-CPAN*

]#tar -zxvf mha4mysql-manager-0.56.tar.gz

]#cd mha4mysql-manager-0.56

]#perl Makefile.PL

]#make

]#make install

3.2.4检查配置环境

在主机51 52 53检查是否有同步数据的用户repluser

mysql>show grants for repluser@"%";

u 在主机51~55做如下授权

mysql>grant all on *.* to root@"%" identified by "123456";

u 在主机51~55做如下设置

mysql>set global relay_log_purge=off;

3.2.5拷贝命令（56）

]#cp mha4mysql-manager-0.56/bin/* /usr/local/bin/

3.2.6创建工作目录和主配置文件（56）

]#mkdir /etc/mha_manager/

]#cp mha4mysql-manager-0.56/samples/conf/app1.cnf

/etc/mha_manager/

3.2.7创建故障切换脚本（56）

]#ls /usr/local/bin/master_ip_failover

]#cp mha4mysql-manager-0.56/samples/scripts/master_ip_failover /usr/local/bin/

3.2.8编辑主配置文件app1.cnf (56)

]#vim /etc/mha_manager/app1.cnf

[server default]
manager_workdir=/etc/mha_manager
manager_log=/etc/mha_manager/manager.log
master_ip_failover_script=/usr/local/bin/master_ip_failover
ssh_user=root
ssh_port=22
repl_user=repluser
repl_password=123456
user=root
password=123456
[server1]
hostname=192.168.4.51
port=3306
[server2]
hostname=192.168.4.52
port=3306
candidate_master=1
[server3]
hostname=192.168.4.53
port=3306
candidate_master=1
[server4]
hostname=192.168.4.54
no_master=1
[server5]
hostname=192.168.4.55
no_master=1

2.2.9验证配置

u 验证ssh免密码登录数据节点主机

]#masterha_check_ssh --conf=/etc/mha_manager/app1.cnf

Sun May 6 16:38:19 2018-[info]All SSH connection tests passed

successfully.

u 验证数据节点的主从同步配置（要不调用故障切换脚本）

masterha_check_repl --conf=/etc/mha_manager/app1.cnf

MySQL Replication Health is OK.

四、测试高可用集群配置

4.1在主库上手动部署vip地址192.168.4.100

[root@db51~]#ifconfig eth0:1 192.168.4.100/24

[root@db51~]#ifconfig eth0:1

eth0:1:flags=4163<UP,BROADCAST,RUNNING,MULTICAST>mtu 1500

inet 192.168.4.100 netmask 255.255.255.0 broadcast

192.168.4.255

ether 74:52:09:07:51:01 txqueuelen 1000(Ethernet)

4.2修改故障切换脚本指定vip地址的部署信息

]#vim/usr/local/bin/master_ip_failover

my$vip='192.168.4.100/24';#Virtual IP

my$key="1";

my$ssh_start_vip="/sbin/ifconfig eth0:$key$vip";

my$ssh_stop_vip="/sbin/ifconfig eth0:$key down";

......

##Update master ip on the catalog database,etc

#FIXME_xxx;//备注

：wq

#!/usr/bin/env perl

# Copyright (C) 2011 DeNA Co.,Ltd.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by：
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
# Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;

my (
$command,        $ssh_user,         $orig_master_host,
  $orig_master_ip, $orig_master_port, $new_master_host,
$new_master_ip, $new_master_port, $new_master_user,
$new_master_password
);

my $vip = '192.168.4.60/24'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";

GetOptions(
'command=s'             => \$command,
'ssh_user=s'            => \$ssh_user,
'orig_master_host=s'    => \$orig_master_host,
'orig_master_ip=s'      => \$orig_master_ip,
'orig_master_port=i'    => \$orig_master_port,
'new_master_host=s'     => \$new_master_host,
'new_master_ip=s'       => \$new_master_ip,
'new_master_port=i'     => \$new_master_port,
'new_master_user=s'     => \$new_master_user,
'new_master_password=s' => \$new_master_password,
);

exit &main();

sub main {
if ( $command eq "stop" || $command eq "stopssh" ) {

    # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
    # If you manage master ip address at global catalog database,
    # invalidate orig_master_ip here.
    my $exit_code = 1;
    eval {

      # updating global catalog, etc
      &stop_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
}
elsif ( $command eq "start" ) {

    # all arguments are passed.
    # If you manage master ip address at global catalog database,
    # activate new_master_ip here.
    # You can also grant write access (create user, set read_only=0, etc) here.
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print "Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      print "Creating app user on the new master..\n";
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      &start_vip();
      $exit_code = 0;
    };
    if ($@) {
     warn $@;

      # If you want to continue failover, exit 10.
      exit $exit_code;
    }
    exit $exit_code;
}
elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
}
else {
    &usage();
    exit 1;
}
}
sub start_vip() {
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
sub stop_vip() {
    return 0 unless ($ssh_user);
    `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}

sub usage {
print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}