1.下载源码
https://sourceforge.net/projects/gkernel/files/ethtool/6/
2.编译
修改海思osdrv/tools/board/ethtools中makefile为下载文件名即可
TOOL_TAR_BALL := ethtool-6.tar.gz
make即可
3.使用
用法如下:
/home # ./ethtool -h
ethtool version 6
Usage:
ethtool DEVNAME Display standard information about device
ethtool -s|--change DEVNAME Change generic options
[ speed 10|100|1000|2500|10000 ]
[ duplex half|full ]
[ port tp|aui|bnc|mii|fibre ]
[ autoneg on|off ]
[ advertise %%x ]
[ phyad %%d ]
[ xcvr internal|external ]
[ wol p|u|m|b|a|g|s|d... ]
[ sopass %%x:%%x:%%x:%%x:%%x:%%x ]
[ msglvl %%d ]
ethtool -a|--show-pause DEVNAME Show pause options
ethtool -A|--pause DEVNAME Set pause options
[ autoneg on|off ]
[ rx on|off ]
[ tx on|off ]
ethtool -c|--show-coalesce DEVNAME Show coalesce options
ethtool -C|--coalesce DEVNAME Set coalesce options
[adaptive-rx on|off]
[adaptive-tx on|off]
[rx-usecs N]
[rx-frames N]
[rx-usecs-irq N]
[rx-frames-irq N]
[tx-usecs N]
[tx-frames N]
[tx-usecs-irq N]
[tx-frames-irq N]
[stats-block-usecs N]
[pkt-rate-low N]
[rx-usecs-low N]
[rx-frames-low N]
[tx-usecs-low N]
[tx-frames-low N]
[pkt-rate-high N]
[rx-usecs-high N]
[rx-frames-high N]
[tx-usecs-high N]
[tx-frames-high N]
[sample-interval N]
ethtool -g|--show-ring DEVNAME Query RX/TX ring parameters
ethtool -G|--set-ring DEVNAME Set RX/TX ring parameters
[ rx N ]
[ rx-mini N ]
[ rx-jumbo N ]
[ tx N ]
ethtool -k|--show-offload DEVNAME Get protocol offload information
ethtool -K|--offload DEVNAME Set protocol offload
[ rx on|off ]
[ tx on|off ]
[ sg on|off ]
[ tso on|off ]
[ ufo on|off ]
[ gso on|off ]
ethtool -i|--driver DEVNAME Show driver information
ethtool -d|--register-dump DEVNAME Do a register dump
[ raw on|off ]
[ file FILENAME ]
ethtool -e|--eeprom-dump DEVNAME Do a EEPROM dump
[ raw on|off ]
[ offset N ]
[ length N ]
ethtool -E|--change-eeprom DEVNAME Change bytes in device EEPROM
[ magic N ]
[ offset N ]
[ value N ]
ethtool -r|--negotiate DEVNAME Restart N-WAY negotation
ethtool -p|--identify DEVNAME Show visible port identification (e.g. blinking)
[ TIME-IN-SECONDS ]
ethtool -t|--test DEVNAME Execute adapter self test
[ online | offline ]
ethtool -S|--statistics DEVNAME Show adapter statistics
ethtool -h|--help DEVNAME Show this help
/home # ./ethtool eth0
Settings for eth0:
Supported ports: [ TP AUI BNC MII FIBRE ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Current message level: 0x00000007 (7)
Link detected: yes
来源:CSDN
作者:Ronbin.L
链接:https://blog.csdn.net/xclshwd/article/details/103463556