问题
I am looking at creating a WAV file in C and have seen an example here.
This looks good, but I'm interested in adding two buffers to make the audio stereo (the possibility to have different sound in each ear). If I set the number of channels to two, the audio plays out of the left channel only (which apparently is right, as the left channel is the first channel). I have read I must interleave it with the right channel.
Unfortunately I haven't found much online to help create a stereo WAV.
write_little_endian((unsigned int)(data[i]),bytes_per_sample, wav_file);
I've tried to create a second buffer, with half the amplitude to see if I could interleave.
for (j=0; i<BUF_SIZE; i++) {
phase +=freq_radians_per_sample;
buffertwo[i] = (int)((amplitude/2) * sin(phase));;
}
write_wav("test.wav", BUF_SIZE, buffer, buffertwo, S_RATE);
(changing the function to take two short integer buffers)
And just doing
write_little_endian((unsigned int)(data[i]),bytes_per_sample, wav_file);
write_little_endian((unsigned int)(datatwo[i]),bytes_per_sample, wav_file);
But that does not work. That should in theory be interleaved.
回答1:
So I decided to give it a shot for fun and here is an alternative way to write a .wav file. It generates a file called sawtooth_test.wav. When you play it back, you should hear two different frequencies from left and right. (Don't play it back too loud. Its annoying.)
/*Compiles with gcc -Wall -O2 -o wavwrite wavwrite.c*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <limits.h>
/*
The header of a wav file Based on:
https://ccrma.stanford.edu/courses/422/projects/WaveFormat/
*/
typedef struct wavfile_header_s
{
char ChunkID[4]; /* 4 */
int32_t ChunkSize; /* 4 */
char Format[4]; /* 4 */
char Subchunk1ID[4]; /* 4 */
int32_t Subchunk1Size; /* 4 */
int16_t AudioFormat; /* 2 */
int16_t NumChannels; /* 2 */
int32_t SampleRate; /* 4 */
int32_t ByteRate; /* 4 */
int16_t BlockAlign; /* 2 */
int16_t BitsPerSample; /* 2 */
char Subchunk2ID[4];
int32_t Subchunk2Size;
} wavfile_header_t;
/*Standard values for CD-quality audio*/
#define SUBCHUNK1SIZE (16)
#define AUDIO_FORMAT (1) /*For PCM*/
#define NUM_CHANNELS (2)
#define SAMPLE_RATE (44100)
#define BITS_PER_SAMPLE (16)
#define BYTE_RATE (SAMPLE_RATE * NUM_CHANNELS * BITS_PER_SAMPLE/8)
#define BLOCK_ALIGN (NUM_CHANNELS * BITS_PER_SAMPLE/8)
/*Return 0 on success and -1 on failure*/
int write_PCM16_stereo_header( FILE* file_p,
int32_t SampleRate,
int32_t FrameCount)
{
int ret;
wavfile_header_t wav_header;
int32_t subchunk2_size;
int32_t chunk_size;
size_t write_count;
subchunk2_size = FrameCount * NUM_CHANNELS * BITS_PER_SAMPLE/8;
chunk_size = 4 + (8 + SUBCHUNK1SIZE) + (8 + subchunk2_size);
wav_header.ChunkID[0] = 'R';
wav_header.ChunkID[1] = 'I';
wav_header.ChunkID[2] = 'F';
wav_header.ChunkID[3] = 'F';
wav_header.ChunkSize = chunk_size;
wav_header.Format[0] = 'W';
wav_header.Format[1] = 'A';
wav_header.Format[2] = 'V';
wav_header.Format[3] = 'E';
wav_header.Subchunk1ID[0] = 'f';
wav_header.Subchunk1ID[1] = 'm';
wav_header.Subchunk1ID[2] = 't';
wav_header.Subchunk1ID[3] = ' ';
wav_header.Subchunk1Size = SUBCHUNK1SIZE;
wav_header.AudioFormat = AUDIO_FORMAT;
wav_header.NumChannels = NUM_CHANNELS;
wav_header.SampleRate = SampleRate;
wav_header.ByteRate = BYTE_RATE;
wav_header.BlockAlign = BLOCK_ALIGN;
wav_header.BitsPerSample = BITS_PER_SAMPLE;
wav_header.Subchunk2ID[0] = 'd';
wav_header.Subchunk2ID[1] = 'a';
wav_header.Subchunk2ID[2] = 't';
wav_header.Subchunk2ID[3] = 'a';
wav_header.Subchunk2Size = subchunk2_size;
write_count = fwrite( &wav_header,
sizeof(wavfile_header_t), 1,
file_p);
ret = (1 != write_count)? -1 : 0;
return ret;
}
/*Data structure to hold a single frame with two channels*/
typedef struct PCM16_stereo_s
{
int16_t left;
int16_t right;
} PCM16_stereo_t;
PCM16_stereo_t *allocate_PCM16_stereo_buffer( int32_t FrameCount)
{
return (PCM16_stereo_t *)malloc(sizeof(PCM16_stereo_t) * FrameCount);
}
/*Return the number of audio frames sucessfully written*/
size_t write_PCM16wav_data(FILE* file_p,
int32_t FrameCount,
PCM16_stereo_t *buffer_p)
{
size_t ret;
ret = fwrite( buffer_p,
sizeof(PCM16_stereo_t), FrameCount,
file_p);
return ret;
}
/*Generate two saw-tooth signals at two frequencies and amplitudes*/
int generate_dual_sawtooth( double frequency1,
double amplitude1,
double frequency2,
double amplitude2,
int32_t SampleRate,
int32_t FrameCount,
PCM16_stereo_t *buffer_p)
{
int ret = 0;
double SampleRate_d = (double)SampleRate;
double SamplePeriod = 1.0/SampleRate_d;
double Period1, Period2;
double phase1, phase2;
double Slope1, Slope2;
int32_t k;
/*Check for the violation of the Nyquist limit*/
if( (frequency1*2 >= SampleRate_d) || (frequency2*2 >= SampleRate_d) )
{
ret = -1;
goto error0;
}
/*Compute the period*/
Period1 = 1.0/frequency1;
Period2 = 1.0/frequency2;
/*Compute the slope*/
Slope1 = amplitude1/Period1;
Slope2 = amplitude2/Period2;
for(k = 0, phase1 = 0.0, phase2 = 0.0;
k < FrameCount;
k++)
{
phase1 += SamplePeriod;
phase1 = (phase1 > Period1)? (phase1 - Period1) : phase1;
phase2 += SamplePeriod;
phase2 = (phase2 > Period2)? (phase2 - Period2) : phase2;
buffer_p[k].left = (int16_t)(phase1 * Slope1);
buffer_p[k].right = (int16_t)(phase2 * Slope2);
}
error0:
return ret;
}
int main(void)
{
int ret;
FILE* file_p;
double frequency1 = 493.9; /*B4*/
double amplitude1 = 0.65 * (double)SHRT_MAX;
double frequency2 = 392.0; /*G4*/
double amplitude2 = 0.75 * (double)SHRT_MAX;
double duration = 10; /*seconds*/
int32_t FrameCount = duration * SAMPLE_RATE;
PCM16_stereo_t *buffer_p = NULL;
size_t written;
/*Open the wav file*/
file_p = fopen("./sawtooth_test.wav", "w");
if(NULL == file_p)
{
perror("fopen failed in main");
ret = -1;
goto error0;
}
/*Allocate the data buffer*/
buffer_p = allocate_PCM16_stereo_buffer(FrameCount);
if(NULL == buffer_p)
{
perror("fopen failed in main");
ret = -1;
goto error1;
}
/*Fill the buffer*/
ret = generate_dual_sawtooth( frequency1,
amplitude1,
frequency2,
amplitude2,
SAMPLE_RATE,
FrameCount,
buffer_p);
if(ret < 0)
{
fprintf(stderr, "generate_dual_sawtooth failed in main\n");
ret = -1;
goto error2;
}
/*Write the wav file header*/
ret = write_PCM16_stereo_header(file_p,
SAMPLE_RATE,
FrameCount);
if(ret < 0)
{
perror("write_PCM16_stereo_header failed in main");
ret = -1;
goto error2;
}
/*Write the data out to file*/
written = write_PCM16wav_data( file_p,
FrameCount,
buffer_p);
if(written < FrameCount)
{
perror("write_PCM16wav_data failed in main");
ret = -1;
goto error2;
}
/*Free and close everything*/
error2:
free(buffer_p);
error1:
fclose(file_p);
error0:
return ret;
}
回答2:
I think the problem is with the function "write_little_endian". You shouldn't need to use it on your laptop.
Endianness is architecture specific. The original example was likely for an Arduino microcontroller board. Arduino boards use Atmel microcontrollers which are big-endian. Thats why the code you cited explicitly needs to convert the 16-bit integers to little-endian format.
Your laptop on the other hand, uses x86 processors which are already little endian so no conversion is necessary. If you want robust portable code to convert endianness, you can use the function htole16 in Linux. Lookup the man pages to learn more about this function.
For a quick but non-portable fix, I would say just write out the entire 16bit value.
Also, I don't think you need to halve the amplitudes to go from mono to stereo.
来源：https://stackoverflow.com/questions/23030980/creating-a-stereo-wav-file-using-c