Running WinPhone emulator inside Win10 VMWare

问题

I had a Win 8.1 hosted OS, running VS2013, and could test my WinPhone app in the emulator fine. The host OS is Win7 Pro.

I reinstalled the hosted OS to Win10, and VS2015, and now I get the Hypervisor not enabled error when I try to test my app with the emulator:

I've tried disabling and re-enabling HyperV (in the hosted OS) as per:

Unable to start the Windows Phone Emulator

But to no avail.

I've also tried opening the BIOS setup (PhoenixBIOS) of the hosted machine, but there are no options that I can see that would help.

What else can I try to get it working?

_{(And why oh why didn't I back up the VM first?!)}

回答1:

Into the Workstation run Powershell in elevated mode(Run as Administrator) and run

Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V –All

Stop Workstation and go to settings/processors/Virtualization engine and set:

Preferred mode: Automatic
Disable acceleration for binary translation: unchecked
Virtualize Intel VT-x/EPT or AMD-V/RVI: checked
Virtualize CPU performance counters: checked

Start Workstation and Run lusrmgr.msc and check also your account is in the Hyper-V Administratiors group

Check in the services that the HV Host Service and Hyper-V Virtual Machine Management are up and running.

If Error 31: A device attached to the system is not functioning follow the steps from here.

The fix is:

Shut down Workstation.

Open the registry (Start > Run > regedit).

Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hcmon.

Create a new key called Parameters.

In Parameters, create a new DWORD value entry named DisableDriverCheck, and then set the value to 1.

Reboot

Appears this issue is for Windows 7 host. The fix worked on the few I tried.

If Error 31 is still appearing run in the Workstation command prompt in elevated mode(Run as Administrator) and type

bcdedit /set "{current}" hypervisorlaunchtype auto

and then restart the Workstation.

Check again in the services that the HV Host Service and Hyper-V Virtual Machine Management are up and running.

Go to Network and Sharing Center/Change adapter settings and disable and re-enable all adapters with name: vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)

And now you should run the emulator... ;)

回答2:

Try to open .vmx of your VM and add:

hypervisor.cpuid.v0 = “FALSE”
Select Virtualize Intel VT-x/EPT or AMD-V/RV1 on your VM settings.

来源：https://stackoverflow.com/questions/35716492/running-winphone-emulator-inside-win10-vmware

标签

vmware

virtualization

windows-phone-8-emulator

hypervisor