Why are python's for loops so non-linear for large inputs?

问题

I was benchmarking some python code I noticed something strange. I used the following function to measure how fast it took to iterate through an empty for loop:

def f(n):
    t1 = time.time()
    for i in range(n):
        pass
    print(time.time() - t1)

f(10**6) prints about 0.035, f(10**7) about 0.35, f(10**8) about 3.5, and f(10**9) about 35. But f(10**10)? Well over 2000. That's certainly unexpected. Why would it take over 60 times as long to iterate through 10 times as many elements? What's with python's for loops that causes this? Is this python-specific, or does this occur in a lot of languages?

回答1:

When you get above 10^9 you get out of 32bit integer range. Python3 then transparently moves you onto arbitrary precision integers, which are much slower to allocate and use.

In general working with such big numbers is one of the areas where Python3 is a lot slower that Python2 (which at least had fast 64bit integers on many systems). On the good side it makes python easier to use, with fewer overflow type errors.

回答2:

Some accurate timings using timeit show the times actually roughly increase in line with the input size so your timings seem to be quite a ways off:

In [2]: for n in [10**6,10**7,10**8,10**9,10**10]:
               % timeit f(n)
   ...:     
10 loops, best of 3: 22.8 ms per loop
1 loops, best of 3: 226 ms per loop # roughly ten times previous
1 loops, best of 3: 2.26 s per loop # roughly ten times previous
1 loops, best of 3: 23.3 s per loop # roughly ten times previous
1 loops, best of 3: 4min 18s per loop # roughly ten times previous

Using xrange and python2 we see the ratio roughly the same, obviously python2 is much faster overall due to the fact python3 int has been replaced by long:

In [5]: for n in [10**6,10**7,10**8,10**9,10**10]:
               % timeit f(n)
   ...:     
100 loops, best of 3: 11.3 ms per loop
10 loops, best of 3: 113 ms per loop
1 loops, best of 3: 1.13 s per loop
1 loops, best of 3: 11.4 s per loop
1 loops, best of 3: 1min 56s per loop

The actual difference in run time seems to be more related to the size of window's long rather than directly related to python 3. The difference is marginal when using unix which handles longs much differently to windows so this is a platform specific issue as much if not more than a python one.

来源：https://stackoverflow.com/questions/28662188/why-are-pythons-for-loops-so-non-linear-for-large-inputs

标签

python-3.x

for-loop

benchmarking