Use PS0 and PS1 to display execution time of each bash command

问题

It seems that by executing code in PS0 and PS1 variables (which are eval'ed before and after a prompt command is run, as I understand) it should be possible to record time of each running command and display it in the prompt. Something like that:

user@machine ~/tmp
$ sleep 1

user@machine ~/tmp 1.01s
$

However, I quickly got stuck with recording time in PS0, since something like this doesn't work:

PS0='$(START=$(date +%s.%N))'

As I understand, START assignment happens in a sub-shell, so it is not visible in the outer shell. How would you approach this?

回答1:

I took this as puzzle and want to show the result of my puzzling:

First I fiddled with time measurement. The date +%s.%N (which I didn't realize before) was where I started from. Unfortunately, it seems that bashs arithmetic evaluation seems not to support floating points. Thus, I chosed something else:

$ START=$(date +%s.%N)

$ awk 'BEGIN { printf("%fs", '$(date +%s.%N)' - '$START') }' /dev/null
8.059526s

$

This is sufficient to compute the time difference.

Next, I confirmed what you already described: sub-shell invocation prevents usage of shell variables. Thus, I thought about where else I could store the start time which is global for sub-shells but local enough to be used in multiple interactive shells concurrently. My solution are temp. files (in /tmp). To provide a unique name I came up with this pattern: /tmp/$USER.START.$BASHPID.

$ date +%s.%N >/tmp/$USER.START.$BASHPID ; \
> awk 'BEGIN { printf("%fs", '$(date +%s.%N)' - '$(cat /tmp/$USER.START.$BASHPID)') }' /dev/null
cat: /tmp/ds32737.START.11756: No such file or directory
awk: cmd. line:1: BEGIN { printf("%fs", 1491297723.111219300 - ) }
awk: cmd. line:1:                                              ^ syntax error

$

Damn! Again I'm trapped in the sub-shell issue. To come around this, I defined another variable:

$ INTERACTIVE_BASHPID=$BASHPID

$ date +%s.%N >/tmp/$USER.START.$INTERACTIVE_BASHPID ; \
> awk 'BEGIN { printf("%fs", '$(date +%s.%N)' - '$(cat /tmp/$USER.START.$INTERACTIVE_BASHPID)') }' /dev/null
0.075319s

$

Next step: fiddle this together with PS0 and PS1. In a similar puzzle (SO: How to change bash prompt color based on exit code of last command?), I already mastered the "quoting hell". Thus, I should be able to do it again:

$ PS0='$(date +%s.%N >"/tmp/${USER}.START.${INTERACTIVE_BASHPID}")'

$ PS1='$(awk "BEGIN { printf(\"%fs\", "$(date +%s.%N)" - "$(cat /tmp/$USER.START.$INTERACTIVE_BASHPID)") }" /dev/null)'"$PS1"
0.118550s
$

Ahh. It starts to work. Thus, there is only one issue - to find the right start-up script for the initialization of INTERACTIVE_BASHPID. I found ~/.bashrc which seems to be the right one for this, and which I already used in the past for some other personal customizations.

So, putting it all together - these are the lines I added to my ~/.bashrc:

# command duration puzzle
INTERACTIVE_BASHPID=$BASHPID
date +%s.%N >"/tmp/${USER}.START.${INTERACTIVE_BASHPID}"
PS0='$(date +%s.%N >"/tmp/${USER}.START.${INTERACTIVE_BASHPID}")'
PS1='$(awk "BEGIN { printf(\"%fs\", "$(date +%s.%N)" - "$(cat /tmp/$USER.START.$INTERACTIVE_BASHPID)") }" /dev/null)'"$PS1"

The 3rd line (the date command) has been added to solve another issue. Comment it out and start a new interactive bash to find out why.

A snapshot of my cygwin xterm with bash where I added the above lines to ./~bashrc:

Notes:

I consider this rather as solution to a puzzle than a "serious productive" solution. I'm sure that this kind of time measurement consumes itself a lot of time. The time command might provide a better solution: SE: How to get execution time of a script effectively?. However, this was a nice lecture for practicing the bash...
Don't forget that this code pollutes your /tmp directory with a growing number of small files. Either clean-up the /tmp from time to time or add the appropriate commands for clean-up (e.g. to ~/.bash_logout).

回答2:

I was looking for a solution to a different problem and came upon this question, and decided that sounds like a cool feature to have. Using @Scheff's excellent answer as a base in addition to the solutions I developed for my other problem, I came up with a more elegant and full featured solution.

First, I created a few functions that read/write the time to/from memory. Writing to the shared memory folder prevents disk access and does not persist on reboot if the files are not cleaned for some reason

function roundseconds (){
  # rounds a number to 3 decimal places
  echo m=$1";h=0.5;scale=4;t=1000;if(m<0) h=-0.5;a=m*t+h;scale=3;a/t;" | bc
}

function bash_getstarttime (){
  # places the epoch time in ns into shared memory
  date +%s.%N >"/dev/shm/${USER}.bashtime.${1}"
}

function bash_getstoptime (){
  # reads stored epoch time and subtracts from current
  local endtime=$(date +%s.%N)
  local starttime=$(cat /dev/shm/${USER}.bashtime.${1})
  roundseconds $(echo $(eval echo "$endtime - $starttime") | bc)
}

The input to the bash_ functions is the bash PID

Those functions and the following are added to the ~/.bashrc file

ROOTPID=$BASHPID
bash_getstarttime $ROOTPID

These create the initial time value and store the bash PID as a different variable that can be passed to a function. Then you add the functions to PS0 and PS1

PS0='$(bash_getstarttime $ROOTPID) etc..'
PS1='\[\033[36m\] Execution time $(bash_getstoptime $ROOTPID)s\n'
PS1="$PS1"'and your normal PS1 here'

Now it will generate the time in PS0 prior to processing terminal input, and generate the time again in PS1 after processing terminal input, then calculate the difference and add to PS1. And finally, this code cleans up the stored time when the terminal exits:

function runonexit (){
  rm /dev/shm/${USER}.bashtime.${ROOTPID}
}

trap runonexit EXIT

Putting it all together, plus some additional code being tested, and it looks like this:

The important parts are the execution time in ms, and the user.bashtime files for all active terminal PIDs stored in shared memory. The PID is also shown right after the terminal input, as I added display of it to PS0, and you can see the bashtime files added and removed.

PS0='$(bash_getstarttime $ROOTPID) $ROOTPID experiments \[\033[00m\]\n'

来源：https://stackoverflow.com/questions/43201274/use-ps0-and-ps1-to-display-execution-time-of-each-bash-command

标签

bash

shell

ps1