puppet使用SSL(https)协议来进行通讯,默认情况下,puppet server端使用基于Ruby的WEBRick HTTP服务器。由于WEBRick HTTP服务器在处理agent端的性能方面并不是很强劲,因此需要扩展puppet,搭建Apache或者其他web服务器来处理客户的https请求。
Passenger是一个将Ruby程序嵌入执行的apache的一个模块,它可以让你运行Rails,即Rack应用内的一个Web服务器.能够自动增减集群进程的数量.能提高性能并增加Master和agent之间的并发连接数量。
工作原理如下:
安装好apache和passenger,然后配置apache处理puppet agent的SSL验证请求,最后将apache连接到puppet master.在处理SSL验证请求时,apache会验证puppet agent的证书是否由puppet CA签发,apache 会先验证请求.如果授权通过,则调用master.同时,apache会提供给puppet agent一个证书用于验证服务器的真实性,再将SSL证书存放在适当的位置.打开passenger模块并为puppet master服务创建一个虚拟主机来配置apache.
下面来配置一番:
1.安装apache等相关组件
yum install httpd httpd-devel mod_ssl ruby-devel rubygems libcurl-devel
2.使用ruby gem安装passenger
更换gem镜像 使用淘宝源:
gem sources --remove http://rubygems.org/
gem sources -a http://ruby.taobao.org/
gem sources -l
*** CURRENT SOURCES ***
http://ruby.taobao.org/
gem install rack passenger #安装passenger
passenger-install-apache2-module #整合apache和passenger 按照相关提示解决依赖关系
安装过程会提示配置apache虚拟主机时需要增加passenger模块配置文件
LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-4.0.55/buildout/apache2/mod_passenger.so
<IfModule mod_passenger.c>
PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-4.0.55
PassengerDefaultRuby /usr/bin/ruby
</IfModule>
查看passengeroot目录.
root@10.1.1.33:~# passenger-config --root
/usr/lib/ruby/gems/1.8/gems/passenger-4.0.55
3.配置apache和passenger
需要在puppet master创建rack应用,创建一个目录用来存放config.ru配置文件,并创建一个虚拟主机配置文件.rack为web服务器提供了用来和puppet服务交换请求和响应的一些常用API.Rack适用于Ruby类的HTTP服务,可以用于多台服务器之间部署服务.
创建rack框架目录,拷贝配置文件,赋予puppet权限.
mkdir -p /etc/puppet/rack/puppetmaster/{public,tmp}
cp /usr/share/puppet/ext/rack/config.ru /etc/puppet/rack/puppetmaster/
chown puppet. /etc/puppet/rack/puppetmaster/config.ru
配置apache虚拟主机文件:
cp /usr/share/puppet/ext/rack/example-passenger-vhost.conf /etc/httpd/conf.d/puppet.domain.com.conf
vim /etc/httpd/conf.d/puppet.domain.com.conf
# This Apache 2 virtual host config shows how to use Puppet as a Rack
# application via Passenger. See
# http://docs.puppetlabs.com/guides/passenger.html for more information.
# You can also use the included config.ru file to run Puppet with other Rack
# servers instead of Passenger.
LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-4.0.55/buildout/apache2/mod_passenger.so
<IfModule mod_passenger.c>
PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-4.0.55
PassengerDefaultRuby /usr/bin/ruby
# you probably want to tune these settings
PassengerHighPerformance on
PassengerMaxPoolSize 12
PassengerPoolIdleTime 1500
# PassengerMaxRequests 1000
PassengerStatThrottleRate 120
# RackAutoDetect Off
# RailsAutoDetect Off
</IfModule>
Listen 8140
<VirtualHost *:8140>
SSLEngine on
SSLProtocol ALL -SSLv2 -SSLv3
SSLCipherSuite EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH:+CAMELLIA256:+AES256:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!IDEA:!ECDSA:kEDH:CAMELLIA256-SHA:AES256-SHA:CAMELLIA128-SHA:AES128-SHA
SSLHonorCipherOrder on
SSLCertificateFile /var/lib/puppet/ssl/certs/puppet.domain.com.pem
SSLCertificateKeyFile /var/lib/puppet/ssl/private_keys/puppet.domain.com.pem
SSLCertificateChainFile /var/lib/puppet/ssl/ca/ca_crt.pem
SSLCACertificateFile /var/lib/puppet/ssl/ca/ca_crt.pem
# If Apache complains about invalid signatures on the CRL, you can try disabling
# CRL checking by commenting the next line, but this is not recommended.
SSLCARevocationFile /var/lib/puppet/ssl/ca/ca_crl.pem
# Apache 2.4 introduces the SSLCARevocationCheck directive and sets it to none
# which effectively disables CRL checking; if you are using Apache 2.4+ you must
# specify 'SSLCARevocationCheck chain' to actually use the CRL.
# SSLCARevocationCheck chain
SSLVerifyClient optional
SSLVerifyDepth 1
# The `ExportCertData` option is needed for agent certificate expiration warnings
SSLOptions +StdEnvVars +ExportCertData
# This header needs to be set if using a loadbalancer or proxy
RequestHeader unset X-Forwarded-For
RequestHeader set X-SSL-Subject %{SSL_CLIENT_S_DN}e
RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e
RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e
DocumentRoot /etc/puppet/rack/puppetmaster/public/
RackBaseURI /
<Directory /etc/puppet/rack/puppetmaster/>
Options None
AllowOverride None
Order allow,deny
allow from all
</Directory>
</VirtualHost>
检查配置
root@10.1.1.33:~# service httpd configtest
Syntax OK 启动apache
root@10.1.1.33:~# /etc/init.d/httpd start
检测端口及进程
root@10.1.1.33:~# netstat -tunlp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22000 0.0.0.0:* LISTEN 811/sshd
tcp 0 0 127.0.0.1:55939 0.0.0.0:* LISTEN 15291/Passenger Rac
tcp 0 0 :::8140 :::* LISTEN 15234/httpd
tcp 0 0 :::80 :::* LISTEN 15234/httpd
tcp 0 0 :::22000 :::* LISTEN 811/sshd
tcp 0 0 :::443 :::* LISTEN 15234/httpd
4.客户测试:
root@10.1.1.34:~# puppet agent --test
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Caching catalog for agent.domain.com
Info: Applying configuration version '1418805297'
Notice: Finished catalog run in 0.36 seconds
5.查看passenger状态
root@10.1.1.33:~# passenger-status
Version : 4.0.55
Date : Wed Dec 17 17:24:28 +0800 2014
Instance: 15234
----------- General information -----------
Max pool size : 12
Processes : 1
Requests in top-level queue : 0
----------- Application groups -----------
/etc/puppet/rack/puppetmaster#default:
App root: /etc/puppet/rack/puppetmaster
Requests in queue: 0
* PID: 15291 Sessions: 0 Processed: 62 Uptime: 49m 35s
CPU: 0% Memory : 85M Last used: 1m 24s ago
root@10.1.1.33:~# passenger-memory-stats
Version: 4.0.55
Date : Wed Dec 17 17:24:32 +0800 2014
---------- Apache processes ----------
PID PPID VMSize Private Name
--------------------------------------
15234 1 203.0 MB 0.4 MB /usr/sbin/httpd
15254 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15255 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15256 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15257 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15258 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15259 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15260 15234 203.3 MB 0.5 MB /usr/sbin/httpd
15261 15234 203.3 MB 0.5 MB /usr/sbin/httpd
### Processes: 9
### Total private dirty RSS: 4.27 MB
-------- Nginx processes --------
### Processes: 0
### Total private dirty RSS: 0.00 MB
----- Passenger processes -----
PID VMSize Private Name
-------------------------------
15236 211.6 MB 0.3 MB PassengerWatchdog
15239 564.9 MB 0.7 MB PassengerHelperAgent
15244 210.5 MB 0.8 MB PassengerLoggingAgent
15291 190.6 MB 85.4 MB Passenger RackApp: /etc/puppet/rack/puppetmaster
### Processes: 4
### Total private dirty RSS: 87.20 MB
来源:oschina
链接:https://my.oschina.net/u/812550/blog/357294