问题
I have a RHEL box that I need to put under a moderate and variable amount of CPU load (50%-75%).
What is the best way to go about this? Is there a program that can do this that I am not aware of? I am happy to write some C code to make this happen, I just don't know what system calls will help.
回答1:
This is exactly what you need: http://weather.ou.edu/~apw/projects/stress/
From the homepage: "stress is a simple workload generator for POSIX systems. It imposes a configurable amount of CPU, memory, I/O, and disk stress on the system. It is written in C, and is free software licensed under the GPL."
回答2:
Find a simple prime number search program that has source code. Modify the source code to add a nanosleep call to the main loop with whichever delay gives you the desired CPU load.
回答3:
One common way to get some load on a system is to compile a large software package over and over again. Something like the Linux kernel.
Get a copy of the source code, extract the tar.bz2, go into the top level source directory, copy your kernel config from /boot to .config or zcat /proc/config.gz > .config, the do make oldconfig, then while true; do make clean && make bzImage; done
If you have an SMP system, then make -j bzImage is fun, it will spawn make tasks in parallel.
One problem with this is adjusting the CPU load. It will be a maximum CPU load except for when waiting on disk I/O.
回答4:
You could possibly do this using a Bash script. Use " ps -o pcpu | grep -v CPU" to get the CPU Usage of all the processes. Add all those values together to get the current usage. Then have a busy while loop that basically keeps on checking those values, figuring out the current CPU usage, and waiting a calculated amount of time to keep the processor at a certain threshhold. More detail is need, but hopefully this will give you a good starting point.
Take a look at this CPU Monitor script I found and try to get some other ideas on how you can accomplish this.
回答5:
It really depends what you're trying to test. If you're just testing CPU load, simple scripts to eat empty CPU cycles will work fine. I personally had to test the performance of a RAID array recently and I relied on Bonnie++ and IOZone. IOZone will put a decent load on the box, particularly if you set the file size higher than the RAM.
You may also be interested in this Article.
回答6:
Use the "nice" command.
a) Highest priority: $ nice -n -20 my_command
or
b) Lowest priority: $ nice -n 20 my_command
回答7:
A Simple script to load & hammer the CPU using awk. The script does mathematical calculations and thus CPU load peaks up on higher values passwd to loadserver.sh .
checkout the script @ http://unixfoo.blogspot.com/2008/11/linux-cpu-hammer-script.html
回答8:
You can probably use some load-generating tool to accomplish this, or run a script to take all the CPU cycles and then use nice and renice
on the process to vary the percentage of cycles that the process gets.
Here is a sample bash script that will occupy all the free CPU cycles:
#!/bin/bash
while true ; do
true
done
回答9:
Lookbusy enables set value of CPU load. Project site
lookbusy -c util[-high_util], --cpu-util util[-high_util]
i.e. 60% load
lookbusy -c 60
回答10:
Not sure what your goal is here. I believe glxgears will use 100% CPU.
So find any process that you know will max out the CPU to 100%.
If you have four CPU cores(0 1 2 3), you could use "taskset" to bind this process to say CPUs 0 and 1. That should load your box 50%. To load it 75% bind the process to 0 1 2 CPUs.
Disclaimer: Haven't tested this. Please let us know your results. Even if this works, I'm not sure what you will achieve out of this?
来源:https://stackoverflow.com/questions/141707/how-to-set-cpu-load-on-a-red-hat-linux-box