问题
I am trying to adjust some bash scripts to make them run on a (pbs) cluster.
The individual tasks are performed by several script thats are started by a main script.
So far this main scripts starts multiple scripts in background (by appending &) making them run in parallel on one multi core machine.
I want to substitute these calls by qsubs to distribute load accross the cluster nodes.
However, some jobs depend on others to be finished before they can start.
So far, this was achieved by wait statements in the main script.
But what is the best way to do this using the grid engine?
I already found this question as well as the -W after:jobid[:jobid...] documentation in the qsub man page but I hope there is a better way.
We are talking about several thousend jobs to run in parallel first and another set of the same size to run simultatiously after the last one of these finished.
This would mean I had to queue a lot of jobs depending on a lot of jobs.
I could bring this down by using a dummy job in between, doing nothing but depending on the first group of jobs, on which the second group could depend. This would decrease the number of dependencies from millions to thousands but still: It feeles wrong and I am not even sure if such a long command line would be accepted by the shell.
- Isn't there a way to wait for all my jobs to finish (something like
qwait -u <user>)? - Or all jobs that where submitted from this script (something like
qwait [-p <PID>])?
Of course it would be possible to write something like this using qstat and sleep in a while loop, but I guess this use case is important enough to have a built in solution and I was just incapable to figure that one out.
What would you recommend / use in such a situation?
Addendum I:
Since it was requested in a comment:
$ qsub --version
version: 2.4.8
Maybe also helpful to determine the exact pbs system:
$ qsub --help
usage: qsub [-a date_time] [-A account_string] [-b secs]
[-c [ none | { enabled | periodic | shutdown |
depth=<int> | dir=<path> | interval=<minutes>}... ]
[-C directive_prefix] [-d path] [-D path]
[-e path] [-h] [-I] [-j oe] [-k {oe}] [-l resource_list] [-m n|{abe}]
[-M user_list] [-N jobname] [-o path] [-p priority] [-P proxy_user] [-q queue]
[-r y|n] [-S path] [-t number_to_submit] [-T type] [-u user_list] [-w] path
[-W otherattributes=value...] [-v variable_list] [-V] [-x] [-X] [-z] [script]
Since the comments point to job arrays so far I searched the qsub man page with the following results:
[...]
DESCRIPTION
[...]
In addition to the above, the following environment variables will be available to the batch job.
[...]
PBS_ARRAYID
each member of a job array is assigned a unique identifier (see -t)
[...]
OPTIONS
[...]
-t array_request
Specifies the task ids of a job array. Single task arrays are allowed.
The array_request argument is an integer id or a range of integers. Multiple ids or id ranges can be combined in a comman delimeted list. Examples : -t 1-100 or -t 1,10,50-100
[...]
Addendum II:
I have tried the torque solution given by Dmitri Chubarov but it does not work as described.
Without the job arrray it works as expected:
testuser@headnode ~ $ qsub -W depend=afterok:`qsub ./test1.sh` ./test2 && qstat
2553.testserver.domain
Job id Name User Time Use S Queue
----------------------- ---------------- --------------- -------- - -----
2552.testserver Test1 testuser 0 Q testqueue
2553.testserver Test2 testuser 0 H testqueue
testuser@headnode ~ $ qstat
Job id Name User Time Use S Queue
----------------------- ---------------- --------------- -------- - -----
2552.testserver Test1 testuser 0 R testqueue
2553.testserver Test2 testuser 0 H testqueue
testuser@headnode ~ $ qstat
Job id Name User Time Use S Queue
----------------------- ---------------- --------------- -------- - -----
2553.testserver Test2 testuser 0 R testqueue
However, using job arrays the second job won't start:
testuser@headnode ~ $ qsub -W depend=afterok:`qsub -t 1-2 ./test1.sh` ./test2 && qstat
2555.testserver.domain
Job id Name User Time Use S Queue
----------------------- ---------------- --------------- -------- - -----
2554-1.testserver Test1-1 testuser 0 Q testqueue
2554-2.testserver Test1-1 testuser 0 Q testqueue
2555.testserver Test2 testuser 0 H testqueue
testuser@headnode ~ $ qstat
Job id Name User Time Use S Queue
----------------------- ---------------- --------------- -------- - -----
2554-1.testserver Test1-1 testuser 0 R testqueue
2554-2.testserver Test1-2 testuser 0 R testqueue
2555.testserver Test2 testuser 0 H testqueue
testuser@headnode ~ $ qstat
Job id Name User Time Use S Queue
----------------------- ---------------- --------------- -------- - -----
2555.testserver Test2 testuser 0 H testqueue
I guess this is due to the lack of array indication in the job id that is returned by the first qsub:
testuser@headnode ~ $ qsub -t 1-2 ./test1.sh
2556.testserver.domain
As you can see there is no ...[] indicating this being a job array.
Also, in the qsub output there are no ...[]s but ...-1 and ...-2 indicating the array.
So the remaining question is how to format -W depend=afterok:... to make a job depend on a specified job array.
回答1:
Filling in following the solution suggested by Jonathan in the comments.
There are several resource managers based on the original Portable Batch System: OpenPBS, TORQUE and PBS Professional. The systems had diverged significantly and use different command syntax for newer features such as job arrays.
Job arrays are a convenient way to submit multiple similar jobs based on the same job script. Quoting from the manual:
Sometimes users will want to submit large numbers of jobs based on the same job script. Rather than using a script to repeatedly call qsub, a feature known as job arrays now exists to allow the creation of multiple jobs with one qsub command.
To submit a job array PBS provides the following syntax:
qsub -t 0-10,13,15 script.sh
this submits jobs with ids from 0,1,2,...,10,13,15.
Within the script the variable PBS_ARRAYID carries the id of the job within the array and can be used to pick the necessary configuration.
Job array have their specific dependency options.
TORQUE
TORQUE resource manager that is probably used in the OP. There additional dependency options are provided that can be seen in the following example:
$ qsub -t 1-1000 script.sh
1234[].pbsserver.domainname
$ qsub -t 1001-2000 -W depend=afterokarray:1234[] script.sh
1235[].pbsserver.domainname
This will result in the following qstat output
1234[] script.sh user 0 R queue
1235[] script.sh user 0 H queue
Tested on torque version 3.0.4
The full afterokarray syntax is in the qsub(1) manual.
PBS Professional
In PBS Professional dependencies can work uniformly on ordinary jobs and array jobs. Here is an example:
$ qsub -J 1-1000 -ry script.sh
1234[].pbsserver.domainname
$ qsub -J 1001-2000 -ry -W depend=afterok:1234[] script.sh
1235[].pbsserver.domainname
This will result in the following qstat output
1234[] script.sh user 0 B queue
1235[] script.sh user 0 H queue
Update on Torque versions
Array dependencies became available in Torque since version 2.5.3. Job arrays from version 2.5 are not compatible with job arrays in versions 2.3 or 2.4. In particular the [] syntax was introduced in Torque since version 2.5.
Update on using a delimeter job
For torque versions prior to 2.5 a different solution may work that is based on submitting dummy delimeter jobs between batches of jobs to be separated.
It uses three dependency types: on,before, and after.
Consider the following example
$ DELIM=`qsub -Wdepend=on:1000 dummy.sh `
$ qsub -Wdepend=beforeany:$DELIM script.sh
1001.pbsserver.domainname
... another 998 jobs ...
$ qsub -Wdepend=beforeany:$DELIM script.sh
2000.pbsserver.domainname
$ qsub -Wdepend=after:$DELIM script.sh
2001.pbsserver.domainname
...
This will result in the queue state like this
1000 dummy.sh user 0 H queue
1001 script.sh user 0 R queue
...
2000 script.sh user 0 R queue
2001 script.sh user 0 H queue
...
That is the job #2001 will run only after the previous 1000 jobs terminate. Probably the rudimentary job array facilities available in TORQUE 2.4 can be used as well to submit the script job.
This solution will also work for TORQUE version 2.5 and higher.
来源：https://stackoverflow.com/questions/18442224/wait-for-all-jobs-of-a-user-to-finish-before-submitting-subsequent-jobs-to-a-pbs