1. 技术文章
  2. Convert absolute path into relative path given a current directory using Bash

Convert absolute path into relative path given a current directory using Bash

由 那年仲夏 提交于 2019-11-26 00:57:43

问题


Example:

absolute=\"/foo/bar\"
current=\"/foo/baz/foo\"

# Magic

relative=\"../../bar\"

How do I create the magic (hopefully not too complicated code...)?


回答1:


Using realpath from GNU coreutils 8.23 is the simplest, I think:

$ realpath --relative-to="$file1" "$file2"

For example:

$ realpath --relative-to=/usr/bin/nmap /tmp/testing
../../../tmp/testing



回答2:


$ python -c "import os.path; print os.path.relpath('/foo/bar', '/foo/baz/foo')"

gives:

../../bar



回答3:


This is a corrected, fully functional improvement of the currently best rated solution from @pini (which sadly handle only a few cases)

Reminder : '-z' test if the string is zero-length (=empty) and '-n' test if the string is not empty.

# both $1 and $2 are absolute paths beginning with /
# returns relative path to $2/$target from $1/$source
source=$1
target=$2

common_part=$source # for now
result="" # for now

while [[ "${target#$common_part}" == "${target}" ]]; do
    # no match, means that candidate common part is not correct
    # go up one level (reduce common part)
    common_part="$(dirname $common_part)"
    # and record that we went back, with correct / handling
    if [[ -z $result ]]; then
        result=".."
    else
        result="../$result"
    fi
done

if [[ $common_part == "/" ]]; then
    # special case for root (no common path)
    result="$result/"
fi

# since we now have identified the common part,
# compute the non-common part
forward_part="${target#$common_part}"

# and now stick all parts together
if [[ -n $result ]] && [[ -n $forward_part ]]; then
    result="$result$forward_part"
elif [[ -n $forward_part ]]; then
    # extra slash removal
    result="${forward_part:1}"
fi

echo $result

Test cases :

compute_relative.sh "/A/B/C" "/A"           -->  "../.."
compute_relative.sh "/A/B/C" "/A/B"         -->  ".."
compute_relative.sh "/A/B/C" "/A/B/C"       -->  ""
compute_relative.sh "/A/B/C" "/A/B/C/D"     -->  "D"
compute_relative.sh "/A/B/C" "/A/B/C/D/E"   -->  "D/E"
compute_relative.sh "/A/B/C" "/A/B/D"       -->  "../D"
compute_relative.sh "/A/B/C" "/A/B/D/E"     -->  "../D/E"
compute_relative.sh "/A/B/C" "/A/D"         -->  "../../D"
compute_relative.sh "/A/B/C" "/A/D/E"       -->  "../../D/E"
compute_relative.sh "/A/B/C" "/D/E/F"       -->  "../../../D/E/F"



回答4:


#!/bin/bash
# both $1 and $2 are absolute paths
# returns $2 relative to $1

source=$1
target=$2

common_part=$source
back=
while [ "${target#$common_part}" = "${target}" ]; do
  common_part=$(dirname $common_part)
  back="../${back}"
done

echo ${back}${target#$common_part/}



回答5:


It is built in to Perl since 2001, so it works on nearly every system you can imagine, even VMS.

perl -e 'use File::Spec; print File::Spec->abs2rel(@ARGV) . "\n"' FILE BASE

Also, the solution is easy to understand.

So for your example:

perl -e 'use File::Spec; print File::Spec->abs2rel(@ARGV) . "\n"' $absolute $current

...would work fine.




回答6:


Python's os.path.relpath as a shell function

The goal of this relpath exercise is to mimic Python 2.7's os.path.relpath function (available from Python version 2.6 but only working properly in 2.7), as proposed by xni. As a consequence, some of the results may differ from functions provided in other answers.

(I have not tested with newlines in paths simply because it breaks the validation based on calling python -c from ZSH. It would certainly be possible with some effort.)

Regarding “magic” in Bash, I have given up looking for magic in Bash long ago, but I have since found all the magic I need, and then some, in ZSH.

Consequently, I propose two implementations.

The first implementation aims to be fully POSIX-compliant. I have tested it with /bin/dash on Debian 6.0.6 “Squeeze”. It also works perfectly with /bin/sh on OS X 10.8.3, which is actually Bash version 3.2 pretending to be a POSIX shell.

The second implementation is a ZSH shell function that is robust against multiple slashes and other nuisances in paths. If you have ZSH available, this is the recommended version, even if you are calling it in the script form presented below (i.e. with a shebang of #!/usr/bin/env zsh) from another shell.

Finally, I have written a ZSH script that verifies the output of the relpath command found in $PATH given the test cases provided in other answers. I added some spice to those tests by adding some spaces, tabs, and punctuation such as ! ? * here and there and also threw in yet another test with exotic UTF-8 characters found in vim-powerline.

POSIX shell function

First, the POSIX-compliant shell function. It works with a variety of paths, but does not clean multiple slashes or resolve symlinks.

#!/bin/sh
relpath () {
    [ $# -ge 1 ] && [ $# -le 2 ] || return 1
    current="${2:+"$1"}"
    target="${2:-"$1"}"
    [ "$target" != . ] || target=/
    target="/${target##/}"
    [ "$current" != . ] || current=/
    current="${current:="/"}"
    current="/${current##/}"
    appendix="${target##/}"
    relative=''
    while appendix="${target#"$current"/}"
        [ "$current" != '/' ] && [ "$appendix" = "$target" ]; do
        if [ "$current" = "$appendix" ]; then
            relative="${relative:-.}"
            echo "${relative#/}"
            return 0
        fi
        current="${current%/*}"
        relative="$relative${relative:+/}.."
    done
    relative="$relative${relative:+${appendix:+/}}${appendix#/}"
    echo "$relative"
}
relpath "$@"

ZSH shell function

Now, the more robust zsh version. If you would like it to resolve the arguments to real paths à la realpath -f (available in the Linux coreutils package), replace the :a on lines 3 and 4 with :A.

To use this in zsh, remove the first and last line and put it in a directory that is in your $FPATH variable.

#!/usr/bin/env zsh
relpath () {
    [[ $# -ge 1 ]] && [[ $# -le 2 ]] || return 1
    local target=${${2:-$1}:a} # replace `:a' by `:A` to resolve symlinks
    local current=${${${2:+$1}:-$PWD}:a} # replace `:a' by `:A` to resolve symlinks
    local appendix=${target#/}
    local relative=''
    while appendix=${target#$current/}
        [[ $current != '/' ]] && [[ $appendix = $target ]]; do
        if [[ $current = $appendix ]]; then
            relative=${relative:-.}
            print ${relative#/}
            return 0
        fi
        current=${current%/*}
        relative="$relative${relative:+/}.."
    done
    relative+=${relative:+${appendix:+/}}${appendix#/}
    print $relative
}
relpath "$@"

Test script

Finally, the test script. It accepts one option, namely -v to enable verbose output.

#!/usr/bin/env zsh
set -eu
VERBOSE=false
script_name=$(basename $0)

usage () {
    print "\n    Usage: $script_name SRC_PATH DESTINATION_PATH\n" >&2
    exit ${1:=1}
}
vrb () { $VERBOSE && print -P ${(%)@} || return 0; }

relpath_check () {
    [[ $# -ge 1 ]] && [[ $# -le 2 ]] || return 1
    target=${${2:-$1}}
    prefix=${${${2:+$1}:-$PWD}}
    result=$(relpath $prefix $target)
    # Compare with python's os.path.relpath function
    py_result=$(python -c "import os.path; print os.path.relpath('$target', '$prefix')")
    col='%F{green}'
    if [[ $result != $py_result ]] && col='%F{red}' || $VERBOSE; then
        print -P "${col}Source: '$prefix'\nDestination: '$target'%f"
        print -P "${col}relpath: ${(qq)result}%f"
        print -P "${col}python:  ${(qq)py_result}%f\n"
    fi
}

run_checks () {
    print "Running checks..."

    relpath_check '/    a   b/å/⮀*/!' '/    a   b/å/⮀/xäå/?'

    relpath_check '/'  '/A'
    relpath_check '/A'  '/'
    relpath_check '/  & /  !/*/\\/E' '/'
    relpath_check '/' '/  & /  !/*/\\/E'
    relpath_check '/  & /  !/*/\\/E' '/  & /  !/?/\\/E/F'
    relpath_check '/X/Y' '/  & /  !/C/\\/E/F'
    relpath_check '/  & /  !/C' '/A'
    relpath_check '/A /  !/C' '/A /B'
    relpath_check '/Â/  !/C' '/Â/  !/C'
    relpath_check '/  & /B / C' '/  & /B / C/D'
    relpath_check '/  & /  !/C' '/  & /  !/C/\\/Ê'
    relpath_check '/Å/  !/C' '/Å/  !/D'
    relpath_check '/.A /*B/C' '/.A /*B/\\/E'
    relpath_check '/  & /  !/C' '/  & /D'
    relpath_check '/  & /  !/C' '/  & /\\/E'
    relpath_check '/  & /  !/C' '/\\/E/F'

    relpath_check /home/part1/part2 /home/part1/part3
    relpath_check /home/part1/part2 /home/part4/part5
    relpath_check /home/part1/part2 /work/part6/part7
    relpath_check /home/part1       /work/part1/part2/part3/part4
    relpath_check /home             /work/part2/part3
    relpath_check /                 /work/part2/part3/part4
    relpath_check /home/part1/part2 /home/part1/part2/part3/part4
    relpath_check /home/part1/part2 /home/part1/part2/part3
    relpath_check /home/part1/part2 /home/part1/part2
    relpath_check /home/part1/part2 /home/part1
    relpath_check /home/part1/part2 /home
    relpath_check /home/part1/part2 /
    relpath_check /home/part1/part2 /work
    relpath_check /home/part1/part2 /work/part1
    relpath_check /home/part1/part2 /work/part1/part2
    relpath_check /home/part1/part2 /work/part1/part2/part3
    relpath_check /home/part1/part2 /work/part1/part2/part3/part4 
    relpath_check home/part1/part2 home/part1/part3
    relpath_check home/part1/part2 home/part4/part5
    relpath_check home/part1/part2 work/part6/part7
    relpath_check home/part1       work/part1/part2/part3/part4
    relpath_check home             work/part2/part3
    relpath_check .                work/part2/part3
    relpath_check home/part1/part2 home/part1/part2/part3/part4
    relpath_check home/part1/part2 home/part1/part2/part3
    relpath_check home/part1/part2 home/part1/part2
    relpath_check home/part1/part2 home/part1
    relpath_check home/part1/part2 home
    relpath_check home/part1/part2 .
    relpath_check home/part1/part2 work
    relpath_check home/part1/part2 work/part1
    relpath_check home/part1/part2 work/part1/part2
    relpath_check home/part1/part2 work/part1/part2/part3
    relpath_check home/part1/part2 work/part1/part2/part3/part4

    print "Done with checks."
}
if [[ $# -gt 0 ]] && [[ $1 = "-v" ]]; then
    VERBOSE=true
    shift
fi
if [[ $# -eq 0 ]]; then
    run_checks
else
    VERBOSE=true
    relpath_check "$@"
fi



回答7:


Presuming that you have installed: bash, pwd, dirname, echo; then relpath is

#!/bin/bash
s=$(cd ${1%%/};pwd); d=$(cd $2;pwd); while [ "${d#$s/}" == "${d}" ]
do s=$(dirname $s);b="../${b}"; done; echo ${b}${d#$s/}

I've golfed the answer from pini and a few other ideas




回答8:


#!/bin/sh

# Return relative path from canonical absolute dir path $1 to canonical
# absolute dir path $2 ($1 and/or $2 may end with one or no "/").
# Does only need POSIX shell builtins (no external command)
relPath () {
    local common path up
    common=${1%/} path=${2%/}/
    while test "${path#"$common"/}" = "$path"; do
        common=${common%/*} up=../$up
    done
    path=$up${path#"$common"/}; path=${path%/}; printf %s "${path:-.}"
}

# Return relative path from dir $1 to dir $2 (Does not impose any
# restrictions on $1 and $2 but requires GNU Core Utility "readlink"
# HINT: busybox's "readlink" does not support option '-m', only '-f'
#       which requires that all but the last path component must exist)
relpath () { relPath "$(readlink -m "$1")" "$(readlink -m "$2")"; }

Above shell script was inspired by pini's (Thanks!). It triggers a bug in the syntax highlighting module of Stack Overflow (at least in my preview frame). So please ignore if highlighting is incorrect.

Some notes:

  • Removed errors and improved code without significantly increasing code length and complexity
  • Put functionality into functions for easiness of use
  • Kept functions POSIX compatible so that they (should) work with all POSIX shells (tested with dash, bash, and zsh in Ubuntu Linux 12.04)
  • Used local variables only to avoid clobbering global variables and polluting the global name space
  • Both directory paths DO NOT need to exist (requirement for my application)
  • Pathnames may contain spaces, special characters, control characters, backslashes, tabs, ', ", ?, *, [, ], etc.
  • Core function "relPath" uses POSIX shell builtins only but requires canonical absolute directory paths as parameters
  • Extended function "relpath" can handle arbitrary directory paths (also relative, non-canonical) but requires external GNU core utility "readlink"
  • Avoided builtin "echo" and used builtin "printf" instead for two reasons:
    • Due to conflicting historical implementations of builtin "echo" it behaves differently in different shells -> POSIX recommends that printf is preferred over echo.
    • Builtin "echo" of some POSIX shells will interpret some backslash sequences and thus corrupt pathnames containing such sequences
  • To avoid unnecessary conversions, pathnames are used as they are returned and expected by shell and OS utilities (e.g. cd, ln, ls, find, mkdir; unlike python's "os.path.relpath" which will interpret some backslash sequences)

  • Except for the mentioned backslash sequences the last line of function "relPath" outputs pathnames compatible to python:

    path=$up${path#"$common"/}; path=${path%/}; printf %s "${path:-.}"

    Last line can be replaced (and simplified) by line

    printf %s "$up${path#"$common"/}"

    I prefer the latter because

    1. Filenames can be directly appended to dir paths obtained by relPath, e.g.:

      ln -s "$(relpath "<fromDir>" "<toDir>")<file>" "<fromDir>"

    2. Symbolic links in the same dir created with this method do not have the ugly "./" prepended to the filename.

  • If you find an error please contact linuxball (at) gmail.com and I'll try to fix it.
  • Added regression test suite (also POSIX shell compatible)

Code listing for regression tests (simply append it to the shell script): 

############################################################################
# If called with 2 arguments assume they are dir paths and print rel. path #
############################################################################

test "$#" = 2 && {
    printf '%s\n' "Rel. path from '$1' to '$2' is '$(relpath "$1" "$2")'."
    exit 0
}

#######################################################
# If NOT called with 2 arguments run regression tests #
#######################################################

format="\t%-19s %-22s %-27s %-8s %-8s %-8s\n"
printf \
"\n\n*** Testing own and python's function with canonical absolute dirs\n\n"
printf "$format\n" \
    "From Directory" "To Directory" "Rel. Path" "relPath" "relpath" "python"
IFS=
while read -r p; do
    eval set -- $p
    case $1 in '#'*|'') continue;; esac # Skip comments and empty lines
    # q stores quoting character, use " if ' is used in path name
    q="'"; case $1$2 in *"'"*) q='"';; esac
    rPOk=passed rP=$(relPath "$1" "$2"); test "$rP" = "$3" || rPOk=$rP
    rpOk=passed rp=$(relpath "$1" "$2"); test "$rp" = "$3" || rpOk=$rp
    RPOk=passed
    RP=$(python -c "import os.path; print os.path.relpath($q$2$q, $q$1$q)")
    test "$RP" = "$3" || RPOk=$RP
    printf \
    "$format" "$q$1$q" "$q$2$q" "$q$3$q" "$q$rPOk$q" "$q$rpOk$q" "$q$RPOk$q"
done <<-"EOF"
    # From directory    To directory           Expected relative path

    '/'                 '/'                    '.'
    '/usr'              '/'                    '..'
    '/usr/'             '/'                    '..'
    '/'                 '/usr'                 'usr'
    '/'                 '/usr/'                'usr'
    '/usr'              '/usr'                 '.'
    '/usr/'             '/usr'                 '.'
    '/usr'              '/usr/'                '.'
    '/usr/'             '/usr/'                '.'
    '/u'                '/usr'                 '../usr'
    '/usr'              '/u'                   '../u'
    "/u'/dir"           "/u'/dir"              "."
    "/u'"               "/u'/dir"              "dir"
    "/u'/dir"           "/u'"                  ".."
    "/"                 "/u'/dir"              "u'/dir"
    "/u'/dir"           "/"                    "../.."
    "/u'"               "/u'"                  "."
    "/"                 "/u'"                  "u'"
    "/u'"               "/"                    ".."
    '/u"/dir'           '/u"/dir'              '.'
    '/u"'               '/u"/dir'              'dir'
    '/u"/dir'           '/u"'                  '..'
    '/'                 '/u"/dir'              'u"/dir'
    '/u"/dir'           '/'                    '../..'
    '/u"'               '/u"'                  '.'
    '/'                 '/u"'                  'u"'
    '/u"'               '/'                    '..'
    '/u /dir'           '/u /dir'              '.'
    '/u '               '/u /dir'              'dir'
    '/u /dir'           '/u '                  '..'
    '/'                 '/u /dir'              'u /dir'
    '/u /dir'           '/'                    '../..'
    '/u '               '/u '                  '.'
    '/'                 '/u '                  'u '
    '/u '               '/'                    '..'
    '/u\n/dir'          '/u\n/dir'             '.'
    '/u\n'              '/u\n/dir'             'dir'
    '/u\n/dir'          '/u\n'                 '..'
    '/'                 '/u\n/dir'             'u\n/dir'
    '/u\n/dir'          '/'                    '../..'
    '/u\n'              '/u\n'                 '.'
    '/'                 '/u\n'                 'u\n'
    '/u\n'              '/'                    '..'

    '/    a   b/å/⮀*/!' '/    a   b/å/⮀/xäå/?' '../../⮀/xäå/?'
    '/'                 '/A'                   'A'
    '/A'                '/'                    '..'
    '/  & /  !/*/\\/E'  '/'                    '../../../../..'
    '/'                 '/  & /  !/*/\\/E'     '  & /  !/*/\\/E'
    '/  & /  !/*/\\/E'  '/  & /  !/?/\\/E/F'   '../../../?/\\/E/F'
    '/X/Y'              '/  & /  !/C/\\/E/F'   '../../  & /  !/C/\\/E/F'
    '/  & /  !/C'       '/A'                   '../../../A'
    '/A /  !/C'         '/A /B'                '../../B'
    '/Â/  !/C'          '/Â/  !/C'             '.'
    '/  & /B / C'       '/  & /B / C/D'        'D'
    '/  & /  !/C'       '/  & /  !/C/\\/Ê'     '\\/Ê'
    '/Å/  !/C'          '/Å/  !/D'             '../D'
    '/.A /*B/C'         '/.A /*B/\\/E'         '../\\/E'
    '/  & /  !/C'       '/  & /D'              '../../D'
    '/  & /  !/C'       '/  & /\\/E'           '../../\\/E'
    '/  & /  !/C'       '/\\/E/F'              '../../../\\/E/F'
    '/home/p1/p2'       '/home/p1/p3'          '../p3'
    '/home/p1/p2'       '/home/p4/p5'          '../../p4/p5'
    '/home/p1/p2'       '/work/p6/p7'          '../../../work/p6/p7'
    '/home/p1'          '/work/p1/p2/p3/p4'    '../../work/p1/p2/p3/p4'
    '/home'             '/work/p2/p3'          '../work/p2/p3'
    '/'                 '/work/p2/p3/p4'       'work/p2/p3/p4'
    '/home/p1/p2'       '/home/p1/p2/p3/p4'    'p3/p4'
    '/home/p1/p2'       '/home/p1/p2/p3'       'p3'
    '/home/p1/p2'       '/home/p1/p2'          '.'
    '/home/p1/p2'       '/home/p1'             '..'
    '/home/p1/p2'       '/home'                '../..'
    '/home/p1/p2'       '/'                    '../../..'
    '/home/p1/p2'       '/work'                '../../../work'
    '/home/p1/p2'       '/work/p1'             '../../../work/p1'
    '/home/p1/p2'       '/work/p1/p2'          '../../../work/p1/p2'
    '/home/p1/p2'       '/work/p1/p2/p3'       '../../../work/p1/p2/p3'
    '/home/p1/p2'       '/work/p1/p2/p3/p4'    '../../../work/p1/p2/p3/p4'

    '/-'                '/-'                   '.'
    '/?'                '/?'                   '.'
    '/??'               '/??'                  '.'
    '/???'              '/???'                 '.'
    '/?*'               '/?*'                  '.'
    '/*'                '/*'                   '.'
    '/*'                '/**'                  '../**'
    '/*'                '/***'                 '../***'
    '/*.*'              '/*.**'                '../*.**'
    '/*.???'            '/*.??'                '../*.??'
    '/[]'               '/[]'                  '.'
    '/[a-z]*'           '/[0-9]*'              '../[0-9]*'
EOF


format="\t%-19s %-22s %-27s %-8s %-8s\n"
printf "\n\n*** Testing own and python's function with arbitrary dirs\n\n"
printf "$format\n" \
    "From Directory" "To Directory" "Rel. Path" "relpath" "python"
IFS=
while read -r p; do
    eval set -- $p
    case $1 in '#'*|'') continue;; esac # Skip comments and empty lines
    # q stores quoting character, use " if ' is used in path name
    q="'"; case $1$2 in *"'"*) q='"';; esac
    rpOk=passed rp=$(relpath "$1" "$2"); test "$rp" = "$3" || rpOk=$rp
    RPOk=passed
    RP=$(python -c "import os.path; print os.path.relpath($q$2$q, $q$1$q)")
    test "$RP" = "$3" || RPOk=$RP
    printf "$format" "$q$1$q" "$q$2$q" "$q$3$q" "$q$rpOk$q" "$q$RPOk$q"
done <<-"EOF"
    # From directory    To directory           Expected relative path

    'usr/p1/..//./p4'   'p3/../p1/p6/.././/p2' '../../p1/p2'
    './home/../../work' '..//././../dir///'    '../../dir'

    'home/p1/p2'        'home/p1/p3'           '../p3'
    'home/p1/p2'        'home/p4/p5'           '../../p4/p5'
    'home/p1/p2'        'work/p6/p7'           '../../../work/p6/p7'
    'home/p1'           'work/p1/p2/p3/p4'     '../../work/p1/p2/p3/p4'
    'home'              'work/p2/p3'           '../work/p2/p3'
    '.'                 'work/p2/p3'           'work/p2/p3'
    'home/p1/p2'        'home/p1/p2/p3/p4'     'p3/p4'
    'home/p1/p2'        'home/p1/p2/p3'        'p3'
    'home/p1/p2'        'home/p1/p2'           '.'
    'home/p1/p2'        'home/p1'              '..'
    'home/p1/p2'        'home'                 '../..'
    'home/p1/p2'        '.'                    '../../..'
    'home/p1/p2'        'work'                 '../../../work'
    'home/p1/p2'        'work/p1'              '../../../work/p1'
    'home/p1/p2'        'work/p1/p2'           '../../../work/p1/p2'
    'home/p1/p2'        'work/p1/p2/p3'        '../../../work/p1/p2/p3'
    'home/p1/p2'        'work/p1/p2/p3/p4'     '../../../work/p1/p2/p3/p4'
EOF



回答9:


I would just use Perl for this not-so-trivial task:

absolute="/foo/bar"
current="/foo/baz/foo"

# Perl is magic
relative=$(perl -MFile::Spec -e 'print File::Spec->abs2rel("'$absolute'","'$current'")')



回答10:


This script gives correct results only for inputs that are absolute paths or relative paths without . or ..:

#!/bin/bash

# usage: relpath from to

if [[ "$1" == "$2" ]]
then
    echo "."
    exit
fi

IFS="/"

current=($1)
absolute=($2)

abssize=${#absolute[@]}
cursize=${#current[@]}

while [[ ${absolute[level]} == ${current[level]} ]]
do
    (( level++ ))
    if (( level > abssize || level > cursize ))
    then
        break
    fi
done

for ((i = level; i < cursize; i++))
do
    if ((i > level))
    then
        newpath=$newpath"/"
    fi
    newpath=$newpath".."
done

for ((i = level; i < abssize; i++))
do
    if [[ -n $newpath ]]
    then
        newpath=$newpath"/"
    fi
    newpath=$newpath${absolute[i]}
done

echo "$newpath"



回答11:


A slight improvement on kasku's and Pini's answers, which plays nicer with spaces and allows passing relative paths:

#!/bin/bash
# both $1 and $2 are paths
# returns $2 relative to $1
absolute=`readlink -f "$2"`
current=`readlink -f "$1"`
# Perl is magic
# Quoting horror.... spaces cause problems, that's why we need the extra " in here:
relative=$(perl -MFile::Spec -e "print File::Spec->abs2rel(q($absolute),q($current))")

echo $relative



回答12:


Not a lot of the answers here are practical for every day use. Since it is very difficult to do this properly in pure bash, I suggest the following, reliable solution (similar to one suggestion buried in a comment):

function relpath() { 
  python -c "import os,sys;print(os.path.relpath(*(sys.argv[1:])))" "$@";
}

Then, you can get the relative path based upon the current directory:

echo $(relpath somepath)

or you can specify that the path be relative to a given directory:

echo $(relpath somepath /etc)  # relative to /etc

The one disadvantage is this requires python, but:

  • It works identically in any python >= 2.6
  • It does not require that the files or directories exist.
  • Filenames may contain a wider range of special characters. For example, many other solutions do not work if filenames contain spaces or other special characters.
  • It is a one-line function that doesn't clutter scripts.

Note that solutions which include basename or dirname may not necessarily be better, as they require that coreutils be installed. If somebody has a pure bash solution that is reliable and simple (rather than a convoluted curiosity), I'd be surprised.




回答13:


test.sh:

#!/bin/bash                                                                 

cd /home/ubuntu
touch blah
TEST=/home/ubuntu/.//blah
echo TEST=$TEST
TMP=$(readlink -e "$TEST")
echo TMP=$TMP
REL=${TMP#$(pwd)/}
echo REL=$REL

Testing:

$ ./test.sh 
TEST=/home/ubuntu/.//blah
TMP=/home/ubuntu/blah
REL=blah



回答14:


Sadly, Mark Rushakoff's answer (now deleted - it referenced the code from here) does not seem to work correctly when adapted to:

source=/home/part2/part3/part4
target=/work/proj1/proj2

The thinking outlined in the commentary can be refined to make it work correctly for most cases. I'm about to assume that the script takes a source argument (where you are) and a target argument (where you want to get to), and that either both are absolute pathnames or both are relative. If one is absolute and the other relative, the easiest thing is to prefix the relative name with the current working directory - but the code below does not do that.

Beware

The code below is close to working correctly, but is not quite right.

  1. There is the problem addressed in the comments from Dennis Williamson.
  2. There is also a problem that this purely textual processing of pathnames and you can be seriously messed up by weird symlinks.
  3. The code does not handle stray 'dots' in paths like 'xyz/./pqr'.
  4. The code does not handle stray 'double dots' in paths like 'xyz/../pqr'.
  5. Trivially: the code does not remove leading './' from paths.

Dennis's code is better because it fixes 1 and 5 - but has the same issues 2, 3, 4. Use Dennis's code (and up-vote it ahead of this) because of that.

(NB: POSIX provides a system call realpath() that resolves pathnames so that there are no symlinks left in them. Applying that to the input names, and then using Dennis's code would give the correct answer each time. It is trivial to write the C code that wraps realpath() - I've done it - but I don't know of a standard utility that does so.)

For this, I find Perl easier to use than shell, though bash has decent support for arrays and could probably do this too - exercise for the reader. So, given two compatible names, split them each into components:

  • Set the relative path to empty.
  • While the components are the same, skip to the next.
  • When corresponding components are different or there are no more components for one path:
  • If there are no remaining source components and the relative path is empty, add "." to the start.
  • For each remaining source component, prefix the relative path with "../".
  • If there are no remaining target components and the relative path is empty, add "." to the start.
  • For each remaining target component, add the component to the end of the path after a slash.

Thus:

#!/bin/perl -w

use strict;

# Should fettle the arguments if one is absolute and one relative:
# Oops - missing functionality!

# Split!
my(@source) = split '/', $ARGV[0];
my(@target) = split '/', $ARGV[1];

my $count = scalar(@source);
   $count = scalar(@target) if (scalar(@target) < $count);
my $relpath = "";

my $i;
for ($i = 0; $i < $count; $i++)
{
    last if $source[$i] ne $target[$i];
}

$relpath = "." if ($i >= scalar(@source) && $relpath eq "");
for (my $s = $i; $s < scalar(@source); $s++)
{
    $relpath = "../$relpath";
}
$relpath = "." if ($i >= scalar(@target) && $relpath eq "");
for (my $t = $i; $t < scalar(@target); $t++)
{
    $relpath .= "/$target[$t]";
}

# Clean up result (remove double slash, trailing slash, trailing slash-dot).
$relpath =~ s%//%/%;
$relpath =~ s%/$%%;
$relpath =~ s%/\.$%%;

print "source  = $ARGV[0]\n";
print "target  = $ARGV[1]\n";
print "relpath = $relpath\n";

Test script (the square brackets contain a blank and a tab):

sed 's/#.*//;/^[    ]*$/d' <<! |

/home/part1/part2 /home/part1/part3
/home/part1/part2 /home/part4/part5
/home/part1/part2 /work/part6/part7
/home/part1       /work/part1/part2/part3/part4
/home             /work/part2/part3
/                 /work/part2/part3/part4

/home/part1/part2 /home/part1/part2/part3/part4
/home/part1/part2 /home/part1/part2/part3
/home/part1/part2 /home/part1/part2
/home/part1/part2 /home/part1
/home/part1/part2 /home
/home/part1/part2 /

/home/part1/part2 /work
/home/part1/part2 /work/part1
/home/part1/part2 /work/part1/part2
/home/part1/part2 /work/part1/part2/part3
/home/part1/part2 /work/part1/part2/part3/part4

home/part1/part2 home/part1/part3
home/part1/part2 home/part4/part5
home/part1/part2 work/part6/part7
home/part1       work/part1/part2/part3/part4
home             work/part2/part3
.                work/part2/part3

home/part1/part2 home/part1/part2/part3/part4
home/part1/part2 home/part1/part2/part3
home/part1/part2 home/part1/part2
home/part1/part2 home/part1
home/part1/part2 home
home/part1/part2 .

home/part1/part2 work
home/part1/part2 work/part1
home/part1/part2 work/part1/part2
home/part1/part2 work/part1/part2/part3
home/part1/part2 work/part1/part2/part3/part4

!

while read source target
do
    perl relpath.pl $source $target
    echo
done

Output from the test script:

source  = /home/part1/part2
target  = /home/part1/part3
relpath = ../part3

source  = /home/part1/part2
target  = /home/part4/part5
relpath = ../../part4/part5

source  = /home/part1/part2
target  = /work/part6/part7
relpath = ../../../work/part6/part7

source  = /home/part1
target  = /work/part1/part2/part3/part4
relpath = ../../work/part1/part2/part3/part4

source  = /home
target  = /work/part2/part3
relpath = ../work/part2/part3

source  = /
target  = /work/part2/part3/part4
relpath = ./work/part2/part3/part4

source  = /home/part1/part2
target  = /home/part1/part2/part3/part4
relpath = ./part3/part4

source  = /home/part1/part2
target  = /home/part1/part2/part3
relpath = ./part3

source  = /home/part1/part2
target  = /home/part1/part2
relpath = .

source  = /home/part1/part2
target  = /home/part1
relpath = ..

source  = /home/part1/part2
target  = /home
relpath = ../..

source  = /home/part1/part2
target  = /
relpath = ../../../..

source  = /home/part1/part2
target  = /work
relpath = ../../../work

source  = /home/part1/part2
target  = /work/part1
relpath = ../../../work/part1

source  = /home/part1/part2
target  = /work/part1/part2
relpath = ../../../work/part1/part2

source  = /home/part1/part2
target  = /work/part1/part2/part3
relpath = ../../../work/part1/part2/part3

source  = /home/part1/part2
target  = /work/part1/part2/part3/part4
relpath = ../../../work/part1/part2/part3/part4

source  = home/part1/part2
target  = home/part1/part3
relpath = ../part3

source  = home/part1/part2
target  = home/part4/part5
relpath = ../../part4/part5

source  = home/part1/part2
target  = work/part6/part7
relpath = ../../../work/part6/part7

source  = home/part1
target  = work/part1/part2/part3/part4
relpath = ../../work/part1/part2/part3/part4

source  = home
target  = work/part2/part3
relpath = ../work/part2/part3

source  = .
target  = work/part2/part3
relpath = ../work/part2/part3

source  = home/part1/part2
target  = home/part1/part2/part3/part4
relpath = ./part3/part4

source  = home/part1/part2
target  = home/part1/part2/part3
relpath = ./part3

source  = home/part1/part2
target  = home/part1/part2
relpath = .

source  = home/part1/part2
target  = home/part1
relpath = ..

source  = home/part1/part2
target  = home
relpath = ../..

source  = home/part1/part2
target  = .
relpath = ../../..

source  = home/part1/part2
target  = work
relpath = ../../../work

source  = home/part1/part2
target  = work/part1
relpath = ../../../work/part1

source  = home/part1/part2
target  = work/part1/part2
relpath = ../../../work/part1/part2

source  = home/part1/part2
target  = work/part1/part2/part3
relpath = ../../../work/part1/part2/part3

source  = home/part1/part2
target  = work/part1/part2/part3/part4
relpath = ../../../work/part1/part2/part3/part4

This Perl script works fairly thoroughly on Unix (it does not take into account all the complexities of Windows path names) in the face of weird inputs. It uses the module Cwd and its function realpath to resolve the real path of names that exist, and does a textual analysis for paths that don't exist. In all cases except one, it produces the same output as Dennis's script. The deviant case is:

source   = home/part1/part2
target   = .
relpath1 = ../../..
relpath2 = ../../../.

The two results are equivalent - just not identical. (The output is from a mildly modified version of the test script - the Perl script below simply prints the answer, rather than the inputs and the answer as in the script above.) Now: should I eliminate the non-working answer? Maybe...

#!/bin/perl -w
# Based loosely on code from: http://unix.derkeiler.com/Newsgroups/comp.unix.shell/2005-10/1256.html
# Via: http://stackoverflow.com/questions/2564634

use strict;

die "Usage: $0 from to\n" if scalar @ARGV != 2;

use Cwd qw(realpath getcwd);

my $pwd;
my $verbose = 0;

# Fettle filename so it is absolute.
# Deals with '//', '/./' and '/../' notations, plus symlinks.
# The realpath() function does the hard work if the path exists.
# For non-existent paths, the code does a purely textual hack.
sub resolve
{
    my($name) = @_;
    my($path) = realpath($name);
    if (!defined $path)
    {
        # Path does not exist - do the best we can with lexical analysis
        # Assume Unix - not dealing with Windows.
        $path = $name;
        if ($name !~ m%^/%)
        {
            $pwd = getcwd if !defined $pwd;
            $path = "$pwd/$path";
        }
        $path =~ s%//+%/%g;     # Not UNC paths.
        $path =~ s%/$%%;        # No trailing /
        $path =~ s%/\./%/%g;    # No embedded /./
        # Try to eliminate /../abc/
        $path =~ s%/\.\./(?:[^/]+)(/|$)%$1%g;
        $path =~ s%/\.$%%;      # No trailing /.
        $path =~ s%^\./%%;      # No leading ./
        # What happens with . and / as inputs?
    }
    return($path);
}

sub print_result
{
    my($source, $target, $relpath) = @_;
    if ($verbose)
    {
        print "source  = $ARGV[0]\n";
        print "target  = $ARGV[1]\n";
        print "relpath = $relpath\n";
    }
    else
    {
        print "$relpath\n";
    }
    exit 0;
}

my($source) = resolve($ARGV[0]);
my($target) = resolve($ARGV[1]);
print_result($source, $target, ".") if ($source eq $target);

# Split!
my(@source) = split '/', $source;
my(@target) = split '/', $target;

my $count = scalar(@source);
   $count = scalar(@target) if (scalar(@target) < $count);
my $relpath = "";
my $i;

# Both paths are absolute; Perl splits an empty field 0.
for ($i = 1; $i < $count; $i++)
{
    last if $source[$i] ne $target[$i];
}

for (my $s = $i; $s < scalar(@source); $s++)
{
    $relpath = "$relpath/" if ($s > $i);
    $relpath = "$relpath..";
}
for (my $t = $i; $t < scalar(@target); $t++)
{
    $relpath = "$relpath/" if ($relpath ne "");
    $relpath = "$relpath$target[$t]";
}

print_result($source, $target, $relpath);



回答15:


I took your question as a challenge to write this in "portable" shell code, i.e.

  • with a POSIX shell in mind
  • no bashisms such as arrays
  • avoid calling externals like the plague. There's not a single fork in the script! That makes it blazingly fast, especially on systems with significant fork overhead, like cygwin.
  • Must deal with glob characters in pathnames (*, ?, [, ])

It runs on any POSIX conformant shell (zsh, bash, ksh, ash, busybox, ...). It even contains a testsuite to verify its operation. Canonicalization of pathnames is left as an exercise. :-)

#!/bin/sh

# Find common parent directory path for a pair of paths.
# Call with two pathnames as args, e.g.
# commondirpart foo/bar foo/baz/bat -> result="foo/"
# The result is either empty or ends with "/".
commondirpart () {
   result=""
   while test ${#1} -gt 0 -a ${#2} -gt 0; do
      if test "${1%${1#?}}" != "${2%${2#?}}"; then   # First characters the same?
         break                                       # No, we're done comparing.
      fi
      result="$result${1%${1#?}}"                    # Yes, append to result.
      set -- "${1#?}" "${2#?}"                       # Chop first char off both strings.
   done
   case "$result" in
   (""|*/) ;;
   (*)     result="${result%/*}/";;
   esac
}

# Turn foo/bar/baz into ../../..
#
dir2dotdot () {
   OLDIFS="$IFS" IFS="/" result=""
   for dir in $1; do
      result="$result../"
   done
   result="${result%/}"
   IFS="$OLDIFS"
}

# Call with FROM TO args.
relativepath () {
   case "$1" in
   (*//*|*/./*|*/../*|*?/|*/.|*/..)
      printf '%s\n' "'$1' not canonical"; exit 1;;
   (/*)
      from="${1#?}";;
   (*)
      printf '%s\n' "'$1' not absolute"; exit 1;;
   esac
   case "$2" in
   (*//*|*/./*|*/../*|*?/|*/.|*/..)
      printf '%s\n' "'$2' not canonical"; exit 1;;
   (/*)
      to="${2#?}";;
   (*)
      printf '%s\n' "'$2' not absolute"; exit 1;;
   esac

   case "$to" in
   ("$from")   # Identical directories.
      result=".";;
   ("$from"/*) # From /x to /x/foo/bar -> foo/bar
      result="${to##$from/}";;
   ("")        # From /foo/bar to / -> ../..
      dir2dotdot "$from";;
   (*)
      case "$from" in
      ("$to"/*)       # From /x/foo/bar to /x -> ../..
         dir2dotdot "${from##$to/}";;
      (*)             # Everything else.
         commondirpart "$from" "$to"
         common="$result"
         dir2dotdot "${from#$common}"
         result="$result/${to#$common}"
      esac
      ;;
   esac
}

set -f # noglob

set -x
cat <<EOF |
/ / .
/- /- .
/? /? .
/?? /?? .
/??? /??? .
/?* /?* .
/* /* .
/* /** ../**
/* /*** ../***
/*.* /*.** ../*.**
/*.??? /*.?? ../*.??
/[] /[] .
/[a-z]* /[0-9]* ../[0-9]*
/foo /foo .
/foo / ..
/foo/bar / ../..
/foo/bar /foo ..
/foo/bar /foo/baz ../baz
/foo/bar /bar/foo  ../../bar/foo
/foo/bar/baz /gnarf/blurfl/blubb ../../../gnarf/blurfl/blubb
/foo/bar/baz /gnarf ../../../gnarf
/foo/bar/baz /foo/baz ../../baz
/foo. /bar. ../bar.
EOF
while read FROM TO VIA; do
   relativepath "$FROM" "$TO"
   printf '%s\n' "FROM: $FROM" "TO:   $TO" "VIA:  $result"
   if test "$result" != "$VIA"; then
      printf '%s\n' "OOOPS! Expected '$VIA' but got '$result'"
   fi
done

# vi: set tabstop=3 shiftwidth=3 expandtab fileformat=unix :



回答16:


My Solution:

computeRelativePath() 
{

    Source=$(readlink -f ${1})
    Target=$(readlink -f ${2})

    local OLDIFS=$IFS
    IFS="/"

    local SourceDirectoryArray=($Source)
    local TargetDirectoryArray=($Target)

    local SourceArrayLength=$(echo ${SourceDirectoryArray[@]} | wc -w)
    local TargetArrayLength=$(echo ${TargetDirectoryArray[@]} | wc -w)

    local Length
    test $SourceArrayLength -gt $TargetArrayLength && Length=$SourceArrayLength || Length=$TargetArrayLength


    local Result=""
    local AppendToEnd=""

    IFS=$OLDIFS

    local i

    for ((i = 0; i <= $Length + 1 ; i++ ))
    do
            if [ "${SourceDirectoryArray[$i]}" = "${TargetDirectoryArray[$i]}" ]
            then
                continue    
            elif [ "${SourceDirectoryArray[$i]}" != "" ] && [ "${TargetDirectoryArray[$i]}" != "" ] 
            then
                AppendToEnd="${AppendToEnd}${TargetDirectoryArray[${i}]}/"
                Result="${Result}../"               

            elif [ "${SourceDirectoryArray[$i]}" = "" ]
            then
                Result="${Result}${TargetDirectoryArray[${i}]}/"
            else
                Result="${Result}../"
            fi
    done

    Result="${Result}${AppendToEnd}"

    echo $Result

}



回答17:


Here is my version. It's based on the answer by @Offirmo. I made it Dash-compatible and fixed the following testcase failure:

./compute-relative.sh "/a/b/c/de/f/g" "/a/b/c/def/g/" --> "../..f/g/"

Now:

CT_FindRelativePath "/a/b/c/de/f/g" "/a/b/c/def/g/" --> "../../../def/g/"

See the code:

# both $1 and $2 are absolute paths beginning with /
# returns relative path to $2/$target from $1/$source
CT_FindRelativePath()
{
    local insource=$1
    local intarget=$2

    # Ensure both source and target end with /
    # This simplifies the inner loop.
    #echo "insource : \"$insource\""
    #echo "intarget : \"$intarget\""
    case "$insource" in
        */) ;;
        *) source="$insource"/ ;;
    esac

    case "$intarget" in
        */) ;;
        *) target="$intarget"/ ;;
    esac

    #echo "source : \"$source\""
    #echo "target : \"$target\""

    local common_part=$source # for now

    local result=""

    #echo "common_part is now : \"$common_part\""
    #echo "result is now      : \"$result\""
    #echo "target#common_part : \"${target#$common_part}\""
    while [ "${target#$common_part}" = "${target}" -a "${common_part}" != "//" ]; do
        # no match, means that candidate common part is not correct
        # go up one level (reduce common part)
        common_part=$(dirname "$common_part")/
        # and record that we went back
        if [ -z "${result}" ]; then
            result="../"
        else
            result="../$result"
        fi
        #echo "(w) common_part is now : \"$common_part\""
        #echo "(w) result is now      : \"$result\""
        #echo "(w) target#common_part : \"${target#$common_part}\""
    done

    #echo "(f) common_part is     : \"$common_part\""

    if [ "${common_part}" = "//" ]; then
        # special case for root (no common path)
        common_part="/"
    fi

    # since we now have identified the common part,
    # compute the non-common part
    forward_part="${target#$common_part}"
    #echo "forward_part = \"$forward_part\""

    if [ -n "${result}" -a -n "${forward_part}" ]; then
        #echo "(simple concat)"
        result="$result$forward_part"
    elif [ -n "${forward_part}" ]; then
        result="$forward_part"
    fi
    #echo "result = \"$result\""

    # if a / was added to target and result ends in / then remove it now.
    if [ "$intarget" != "$target" ]; then
        case "$result" in
            */) result=$(echo "$result" | awk '{ string=substr($0, 1, length($0)-1); print string; }' ) ;;
        esac
    fi

    echo $result

    return 0
}



回答18:


Yet another solution, pure bash + GNU readlink for easy use in following context:

ln -s "$(relpath "$A" "$B")" "$B"

Edit: Make sure that "$B" is either not existing or no softlink in that case, else relpath follows this link which is not what you want!

This works in nearly all current Linux. If readlink -m does not work at your side, try readlink -f instead. See also https://gist.github.com/hilbix/1ec361d00a8178ae8ea0 for possible updates:

: relpath A B
# Calculate relative path from A to B, returns true on success
# Example: ln -s "$(relpath "$A" "$B")" "$B"
relpath()
{
local X Y A
# We can create dangling softlinks
X="$(readlink -m -- "$1")" || return
Y="$(readlink -m -- "$2")" || return
X="${X%/}/"
A=""
while   Y="${Y%/*}"
        [ ".${X#"$Y"/}" = ".$X" ]
do
        A="../$A"
done
X="$A${X#"$Y"/}"
X="${X%/}"
echo "${X:-.}"
}

Notes:

  • Care was taken that it is safe against unwanted shell meta character expansion, in case filenames contain * or ?.
  • The output is meant to be usable as the first argument to ln -s:
    • relpath / / gives . and not the empty string
    • relpath a a gives a, even if a happens to be a directory
  • Most common cases were tested to give reasonable results, too.
  • This solution uses string prefix matching, hence readlink is required to canonicalize paths.
  • Thanks to readlink -m it works for not yet existing paths, too.

On old systems, where readlink -m is not available, readlink -f fails if the file does not exist. So you probably need some workaround like this (untested!):

readlink_missing()
{
readlink -m -- "$1" && return
readlink -f -- "$1" && return
[ -e . ] && echo "$(readlink_missing "$(dirname "$1")")/$(basename "$1")"
}

This is not really quite correct in case $1 includes . or .. for nonexisting paths (like in /doesnotexist/./a), but it should cover most cases.

(Replace readlink -m -- above by readlink_missing.)

Edit because of the downvote follows

Here is a test, that this function, indeed, is correct:

check()
{
res="$(relpath "$2" "$1")"
[ ".$res" = ".$3" ] && return
printf ':WRONG: %-10q %-10q gives %q\nCORRECT %-10q %-10q gives %q\n' "$1" "$2" "$res" "$@"
}

#     TARGET   SOURCE         RESULT
check "/A/B/C" "/A"           ".."
check "/A/B/C" "/A.x"         "../../A.x"
check "/A/B/C" "/A/B"         "."
check "/A/B/C" "/A/B/C"       "C"
check "/A/B/C" "/A/B/C/D"     "C/D"
check "/A/B/C" "/A/B/C/D/E"   "C/D/E"
check "/A/B/C" "/A/B/D"       "D"
check "/A/B/C" "/A/B/D/E"     "D/E"
check "/A/B/C" "/A/D"         "../D"
check "/A/B/C" "/A/D/E"       "../D/E"
check "/A/B/C" "/D/E/F"       "../../D/E/F"

check "/foo/baz/moo" "/foo/bar" "../bar"

Puzzled? Well, these are the correct results! Even if you think it does not fit the question, here is the proof this is correct:

check "http://example.com/foo/baz/moo" "http://example.com/foo/bar" "../bar"

Without any doubt, ../bar is the exact and only correct relative path of the page bar seen from the page moo. Everything else would be plain wrong.

It is trivial to adopt the output to the question which apparently assumes, that current is a directory:

absolute="/foo/bar"
current="/foo/baz/foo"
relative="../$(relpath "$absolute" "$current")"

This returns exactly, what was asked for.

And before you raise an eyebrow, here is a bit more complex variant of relpath (spot the small difference), which should work for URL-Syntax, too (so a trailing / survives, thanks to some bash-magic):

# Calculate relative PATH to the given DEST from the given BASE
# In the URL case, both URLs must be absolute and have the same Scheme.
# The `SCHEME:` must not be present in the FS either.
# This way this routine works for file paths an
: relpathurl DEST BASE
relpathurl()
{
local X Y A
# We can create dangling softlinks
X="$(readlink -m -- "$1")" || return
Y="$(readlink -m -- "$2")" || return
X="${X%/}/${1#"${1%/}"}"
Y="${Y%/}${2#"${2%/}"}"
A=""
while   Y="${Y%/*}"
        [ ".${X#"$Y"/}" = ".$X" ]
do
        A="../$A"
done
X="$A${X#"$Y"/}"
X="${X%/}"
echo "${X:-.}"
}

And here are the checks just to make clear: It really works as told.

check()
{
res="$(relpathurl "$2" "$1")"
[ ".$res" = ".$3" ] && return
printf ':WRONG: %-10q %-10q gives %q\nCORRECT %-10q %-10q gives %q\n' "$1" "$2" "$res" "$@"
}

#     TARGET   SOURCE         RESULT
check "/A/B/C" "/A"           ".."
check "/A/B/C" "/A.x"         "../../A.x"
check "/A/B/C" "/A/B"         "."
check "/A/B/C" "/A/B/C"       "C"
check "/A/B/C" "/A/B/C/D"     "C/D"
check "/A/B/C" "/A/B/C/D/E"   "C/D/E"
check "/A/B/C" "/A/B/D"       "D"
check "/A/B/C" "/A/B/D/E"     "D/E"
check "/A/B/C" "/A/D"         "../D"
check "/A/B/C" "/A/D/E"       "../D/E"
check "/A/B/C" "/D/E/F"       "../../D/E/F"

check "/foo/baz/moo" "/foo/bar" "../bar"
check "http://example.com/foo/baz/moo" "http://example.com/foo/bar" "../bar"

check "http://example.com/foo/baz/moo/" "http://example.com/foo/bar" "../../bar"
check "http://example.com/foo/baz/moo"  "http://example.com/foo/bar/" "../bar/"
check "http://example.com/foo/baz/moo/"  "http://example.com/foo/bar/" "../../bar/"

And here is how this can be used to give the wanted result from the question:

absolute="/foo/bar"
current="/foo/baz/foo"
relative="$(relpathurl "$absolute" "$current/")"
echo "$relative"

If you find something which does not work, please let me know in the comments below. Thanks.

PS:

Why are the arguments of relpath "reversed" in contrast to all the other answers here?

If you change

Y="$(readlink -m -- "$2")" || return

to

Y="$(readlink -m -- "${2:-"$PWD"}")" || return

then you can leave the 2nd parameter away, such that the BASE is the current directory/URL/whatever. That's only the Unix principle, as usual.

If you dislike that, please go back to Windows. Thanks.




回答19:


Guess this one shall do the trick too... (comes with built-in tests) :)

OK, some overhead expected, but we're doing Bourne shell here! ;) 

#!/bin/sh

#
# Finding the relative path to a certain file ($2), given the absolute path ($1)
# (available here too http://pastebin.com/tWWqA8aB)
#
relpath () {
  local  FROM="$1"
  local    TO="`dirname  $2`"
  local  FILE="`basename $2`"
  local  DEBUG="$3"

  local FROMREL=""
  local FROMUP="$FROM"
  while [ "$FROMUP" != "/" ]; do
    local TOUP="$TO"
    local TOREL=""
    while [ "$TOUP" != "/" ]; do
      [ -z "$DEBUG" ] || echo 1>&2 "$DEBUG$FROMUP =?= $TOUP"
      if [ "$FROMUP" = "$TOUP" ]; then
        echo "${FROMREL:-.}/$TOREL${TOREL:+/}$FILE"
        return 0
      fi
      TOREL="`basename $TOUP`${TOREL:+/}$TOREL"
      TOUP="`dirname $TOUP`"
    done
    FROMREL="..${FROMREL:+/}$FROMREL"
    FROMUP="`dirname $FROMUP`"
  done
  echo "${FROMREL:-.}${TOREL:+/}$TOREL/$FILE"
  return 0
}

relpathshow () {
  echo " - target $2"
  echo "   from   $1"
  echo "   ------"
  echo "   => `relpath $1 $2 '      '`"
  echo ""
}

# If given 2 arguments, do as said...
if [ -n "$2" ]; then
  relpath $1 $2

# If only one given, then assume current directory
elif [ -n "$1" ]; then
  relpath `pwd` $1

# Otherwise perform a set of built-in tests to confirm the validity of the method! ;)
else

  relpathshow /usr/share/emacs22/site-lisp/emacs-goodies-el \
              /usr/share/emacs22/site-lisp/emacs-goodies-el/filladapt.el

  relpathshow /usr/share/emacs23/site-lisp/emacs-goodies-el \
              /usr/share/emacs22/site-lisp/emacs-goodies-el/filladapt.el

  relpathshow /usr/bin \
              /usr/share/emacs22/site-lisp/emacs-goodies-el/filladapt.el

  relpathshow /usr/bin \
              /usr/share/emacs22/site-lisp/emacs-goodies-el/filladapt.el

  relpathshow /usr/bin/share/emacs22/site-lisp/emacs-goodies-el \
              /etc/motd

  relpathshow / \
              /initrd.img
fi



回答20:


This script works only on the path names. It does not require any of the files to exist. If the paths passed are not absolute, the behavior is a bit unusual, but it should work as expected if both paths are relative.

I only tested it on OS X, so it might not be portable.

#!/bin/bash
set -e
declare SCRIPT_NAME="$(basename $0)"
function usage {
    echo "Usage: $SCRIPT_NAME <base path> <target file>"
    echo "       Outputs <target file> relative to <base path>"
    exit 1
}

if [ $# -lt 2 ]; then usage; fi

declare base=$1
declare target=$2
declare -a base_part=()
declare -a target_part=()

#Split path elements & canonicalize
OFS="$IFS"; IFS='/'
bpl=0;
for bp in $base; do
    case "$bp" in
        ".");;
        "..") let "bpl=$bpl-1" ;;
        *) base_part[${bpl}]="$bp" ; let "bpl=$bpl+1";;
    esac
done
tpl=0;
for tp in $target; do
    case "$tp" in
        ".");;
        "..") let "tpl=$tpl-1" ;;
        *) target_part[${tpl}]="$tp" ; let "tpl=$tpl+1";;
    esac
done
IFS="$OFS"

#Count common prefix
common=0
for (( i=0 ; i<$bpl ; i++ )); do
    if [ "${base_part[$i]}" = "${target_part[$common]}" ] ; then
        let "common=$common+1"
    else
        break
    fi
done

#Compute number of directories up
let "updir=$bpl-$common" || updir=0 #if the expression is zero, 'let' fails

#trivial case (after canonical decomposition)
if [ $updir -eq 0 ]; then
    echo .
    exit
fi

#Print updirs
for (( i=0 ; i<$updir ; i++ )); do
    echo -n ../
done

#Print remaining path
for (( i=$common ; i<$tpl ; i++ )); do
    if [ $i -ne $common ]; then
        echo -n "/"
    fi
    if [ "" != "${target_part[$i]}" ] ; then
        echo -n "${target_part[$i]}"
    fi
done
#One last newline
echo



回答21:


This answer does not address the Bash part of the question, but because I tried to use the answers in this question to implement this functionality in Emacs I'll throw it out there.

Emacs actually has a function for this out of the box:

ELISP> (file-relative-name "/a/b/c" "/a/b/c")
"."
ELISP> (file-relative-name "/a/b/c" "/a/b")
"c"
ELISP> (file-relative-name "/a/b/c" "/c/b")
"../../a/b/c"



回答22:


Here's a shell script that does it without calling other programs:

#! /bin/env bash 

#bash script to find the relative path between two directories

mydir=${0%/}
mydir=${0%/*}
creadlink="$mydir/creadlink"

shopt -s extglob

relpath_ () {
        path1=$("$creadlink" "$1")
        path2=$("$creadlink" "$2")
        orig1=$path1
        path1=${path1%/}/
        path2=${path2%/}/

        while :; do
                if test ! "$path1"; then
                        break
                fi
                part1=${path2#$path1}
                if test "${part1#/}" = "$part1"; then
                        path1=${path1%/*}
                        continue
                fi
                if test "${path2#$path1}" = "$path2"; then
                        path1=${path1%/*}
                        continue
                fi
                break
        done
        part1=$path1
        path1=${orig1#$part1}
        depth=${path1//+([^\/])/..}
        path1=${path2#$path1}
        path1=${depth}${path2#$part1}
        path1=${path1##+(\/)}
        path1=${path1%/}
        if test ! "$path1"; then
                path1=.
        fi
        printf "$path1"

}

relpath_test () {
        res=$(relpath_ /path1/to/dir1 /path1/to/dir2 )
        expected='../dir2'
        test_results "$res" "$expected"

        res=$(relpath_ / /path1/to/dir2 )
        expected='path1/to/dir2'
        test_results "$res" "$expected"

        res=$(relpath_ /path1/to/dir2 / )
        expected='../../..'
        test_results "$res" "$expected"

        res=$(relpath_ / / )
        expected='.'
        test_results "$res" "$expected"

        res=$(relpath_ /path/to/dir2/dir3 /path/to/dir1/dir4/dir4a )
        expected='../../dir1/dir4/dir4a'
        test_results "$res" "$expected"

        res=$(relpath_ /path/to/dir1/dir4/dir4a /path/to/dir2/dir3 )
        expected='../../../dir2/dir3'
        test_results "$res" "$expected"

        #res=$(relpath_ . /path/to/dir2/dir3 )
        #expected='../../../dir2/dir3'
        #test_results "$res" "$expected"
}

test_results () {
        if test ! "$1" = "$2"; then
                printf 'failed!\nresult:\nX%sX\nexpected:\nX%sX\n\n' "$@"
        fi
}

#relpath_test

source: http://www.ynform.org/w/Pub/Relpath




回答23:


I needed something like this but which resolved symbolic links too. I discovered that pwd has a -P flag for that purpose. A fragment of my script is appended. It's within a function in a shell script, hence the $1 and $2. The result value, which is the relative path from START_ABS to END_ABS, is in the UPDIRS variable. The script cd's into each parameter directory in order to execute the pwd -P and this also means that relative path parameters are handled. Cheers, Jim

SAVE_DIR="$PWD"
cd "$1"
START_ABS=`pwd -P`
cd "$SAVE_DIR"
cd "$2"
END_ABS=`pwd -P`

START_WORK="$START_ABS"
UPDIRS=""

while test -n "${START_WORK}" -a "${END_ABS/#${START_WORK}}" '==' "$END_ABS";
do
    START_WORK=`dirname "$START_WORK"`"/"
    UPDIRS=${UPDIRS}"../"
done
UPDIRS="$UPDIRS${END_ABS/#${START_WORK}}"
cd "$SAVE_DIR"


来源：https://stackoverflow.com/questions/2564634/convert-absolute-path-into-relative-path-given-a-current-directory-using-bash

标签
bash
shell
path
relative-path
absolute-path
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!