1. 技术文章
  2. Evaluating a string of simple mathematical expressions [closed]

Evaluating a string of simple mathematical expressions [closed]

由 帅比萌擦擦* 提交于 2019-11-26 21:17:51
Daniel Martin

Perl (no eval)

Number of characters: 167 106 (see below for the 106 character version)

Fully obfuscated function: (167 characters if you join these three lines into one)

sub e{my$_="($_[0])";s/\s//g;$n=q"(-?\d++(\.\d+)?+)";
@a=(sub{$1},1,sub{$3*$6},sub{$3+$6},4,sub{$3-$6},6,sub{$3/$6});
while(s:\($n\)|(?<=\()$n(.)$n:$a[7&ord$5]():e){}$_}

Clear/deobfuscated version:

sub e {
  my $_ = "($_[0])";
  s/\s//g;
  $n=q"(-?\d++(\.\d+)?+)"; # a regex for "number", including capturing groups
                           # q"foo" in perl means the same as 'foo'
                           # Note the use of ++ and ?+ to tell perl
                           # "no backtracking"

  @a=(sub{$1},             # 0 - no operator found
      1,                   # placeholder
      sub{$3*$6},          # 2 - ord('*') = 052
      sub{$3+$6},          # 3 - ord('+') = 053
      4,                   # placeholder
      sub{$3-$6},          # 5 - ord('-') = 055
      6,                   # placeholder
      sub{$3/$6});         # 7 - ord('/') = 057

  # The (?<=... bit means "find a NUM WHATEVER NUM sequence that happens
  # immediately after a left paren", without including the left
  # paren.  The while loop repeatedly replaces "(" NUM WHATEVER NUM with
  # "(" RESULT and "(" NUM ")" with NUM.  The while loop keeps going
  # so long as those replacements can be made.

  while(s:\($n\)|(?<=\()$n(.)$n:$a[7&ord$5]():e){}

  # A perl function returns the value of the last statement
  $_
}

I had misread the rules initially, so I'd submitted a version with "eval". Here's a version without it.

The latest bit of insight came when I realized that the last octal digit in the character codes for +, -, /, and * is different, and that ord(undef) is 0. This lets me set up the dispatch table @a as an array, and just invoke the code at the location 7 & ord($3).

There's an obvious spot to shave off one more character - change q"" into '' - but that would make it harder to cut-and-paste into the shell.

Even shorter

Number of characters: 124 106

Taking edits by ephemient into account, it's now down to 124 characters: (join the two lines into one)

sub e{$_=$_[0];s/\s//g;$n=q"(-?\d++(\.\d+)?+)";
1while s:\($n\)|$n(.)$n:($1,1,$3*$6,$3+$6,4,$3-$6,6,$6&&$3/$6)[7&ord$5]:e;$_}

Shorter still

Number of characters: 110 106

The ruby solution down below is pushing me further, though I can't reach its 104 characters:

sub e{($_)=@_;$n='( *-?[.\d]++ *)';
s:\($n\)|$n(.)$n:(($1,$2-$4,$4&&$2/$4,$2*$4,$2+$4)x9)[.8*ord$3]:e?e($_):$_}

I had to give in and use ''. That ruby send trick is really useful for this problem.

Squeezing water from a stone

Number of characters: 106

A small contortion to avoid the divide-by-zero check.

sub e{($_)=@_;$n='( *-?[.\d]++ *)';
s:\($n\)|$n(.)$n:($1,0,$2*$4,$2+$4,0,$2-$4)[7&ord$3]//$2/$4:e?e($_):$_}

Here's the test harness for this function:

perl -le 'sub e{($_)=@_;$n='\''( *-?[.\d]++ *)'\'';s:\($n\)|$n(.)$n:($1,0,$2*$4,$2+$4,0,$2-$4)[7&ord$3]//$2/$4:e?e($_):$_}' -e 'print e($_) for @ARGV' '1 + 3' '1 + ((123 * 3 - 69) / 100)' '4 * (9 - 4) / (2 * 6 - 2) + 8' '2*3*4*5+99' '2.45/8.5*9.27+(5*0.0023) ' '1 + 3 / -8'
Skizz

Assembler

427 bytes

Obfuscated, assembled with the excellent A86 into a .com executable:

dd 0db9b1f89h, 081bee3h, 0e8af789h, 0d9080080h, 0bdac7674h, 013b40286h
dd 07400463ah, 0ccfe4508h, 08ce9f675h, 02fc8000h, 013b0057eh, 0feaac42ah
dd 0bedf75c9h, 0ba680081h, 04de801h, 04874f73bh, 04474103ch, 0e8e8b60fh
dd 08e8a003fh, 0e880290h, 0de0153h, 08b57e6ebh, 0d902a93eh, 046d891dh
dd 08906c783h, 05f02a93eh, 03cffcee8h, 057197510h, 02a93e8bh, 08b06ef83h
dd 05d9046dh, 02a93e89h, 03bc9d95fh, 0ac0174f7h, 074f73bc3h, 0f3cac24h
dd 0eed9c474h, 0197f0b3ch, 07cc4940fh, 074f73b09h, 0103cac09h, 0a3ce274h
dd 0e40a537eh, 0e0d90274h, 02a3bac3h, 021cd09b4h, 03e8b20cdh, 0ff8102a9h
dd 0ed7502abh, 0474103ch, 0e57d0b3ch, 0be02a3bfh, 014d903a3h, 0800344f6h
dd 02db00574h, 0d9e0d9aah, 0d9029f2eh, 0bb34dfc0h, 08a0009h, 01c75f0a8h
dd 020750fa8h, 0b0f3794bh, 021e9aa30h, 0de607400h, 08802990eh, 0de07df07h
dd 0c392ebc1h, 0e8c0008ah, 0aa300404h, 0f24008ah, 04baa3004h, 02eb0ee79h
dd 03005c6aah, 0c0d90ab1h, 0e9defcd9h, 02a116deh, 0e480e0dfh, 040fc8045h
dd 0ede1274h, 0c0d90299h, 015dffcd9h, 047300580h, 0de75c9feh, 0303d804fh
dd 03d80fa74h, 04f01752eh, 0240145c6h, 0dfff52e9h, 0d9029906h, 0f73b025fh
dd 03caca174h, 07fed740ah, 0df07889ah, 0277d807h, 047d9c1deh, 0990ede02h
dd 025fd902h, 03130e0ebh, 035343332h, 039383736h, 02f2b2d2eh, 02029282ah
dd 0e9000a09h, 07fc9f9c1h, 04500000fh, 0726f7272h
db 024h, 0abh, 02h

EDIT: Unobfuscated source:

        mov [bx],bx
        finit
        mov si,81h
        mov di,si
        mov cl,[80h]
        or cl,bl
        jz ret
    l1:
        lodsb
        mov bp,d1
        mov ah,19
    l2:
        cmp al,[bp]
        je l3
        inc bp
        dec ah
        jne l2
        jmp exit
    l3:
        cmp ah,2
        jle l4
        mov al,19
        sub al,ah
        stosb
    l4:
        dec cl
        jnz l1
        mov si,81h
        push done

    decode:
    l5:
        call l7
    l50:
        cmp si,di
        je ret
        cmp al,16
        je ret
        db 0fh, 0b6h, 0e8h ; movzx bp,al
        call l7
        mov cl,[bp+op-11]
        mov byte ptr [sm1],cl
        db 0deh
    sm1:db ?
        jmp l50

    open:
        push di
        mov di,word ptr [s]
        fstp dword ptr [di]
        mov [di+4],bp
        add di,6
        mov word ptr [s],di
        pop di
        call decode
        cmp al,16
        jne ret
        push di
        mov di,word ptr [s]
        sub di,6
        mov bp,[di+4]
        fld dword ptr [di]
        mov word ptr [s],di
        pop di
        fxch st(1)
        cmp si,di
        je ret
        lodsb
        ret



    l7: cmp si,di
        je exit
        lodsb
        cmp al,15
        je open
        fldz
        cmp al,11
        jg exit
        db 0fh, 94h, 0c4h ; sete ah 
        jl l10
    l9:
        cmp si,di
        je l12
        lodsb
        cmp al,16
        je ret
    l10:
        cmp al,10
        jle l12i

    l12:
        or ah,ah
        je l13
        fchs
    l13:
        ret

    exit:
        mov dx,offset res
        mov ah,9
        int 21h
        int 20h

    done:
        mov di,word ptr [s]
        cmp di,(offset s)+2
        jne exit
        cmp al,16
        je ok
        cmp al,11
        jge exit
    ok:
        mov di,res
        mov si,res+100h
        fst dword ptr [si]
        test byte ptr [si+3],80h
        jz pos
        mov al,'-'
        stosb
        fchs
    pos:
        fldcw word ptr [cw]
        fld st(0)
        fbstp [si]
        mov bx,9
    l1000:
        mov al,[si+bx]
        test al,0f0h
        jne startu
        test al,0fh
        jne startl
        dec bx
        jns l1000
        mov al,'0'
        stosb
        jmp frac

    l12i:
        je l11
        fimul word ptr [d3]
        mov [bx],al
        fild word ptr [bx]
        faddp
        jmp l9
        ret

    startu:
        mov al,[si+bx]
        shr al,4
        add al,'0'
        stosb
    startl:
        mov al,[si+bx]
        and al,0fh
        add al,'0'
        stosb
        dec bx
        jns startu

    frac:
        mov al,'.'
        stosb
        mov byte ptr [di],'0'
        mov cl,10
        fld st(0)
        frndint
    frac1:  
        fsubp st(1)
        ficom word ptr [zero]
        fstsw ax
        and ah,045h
        cmp ah,040h
        je finished
        fimul word ptr [d3]
        fld st(0)
        frndint
        fist word ptr [di]
        add byte ptr [di],'0'
        inc di
        dec cl
        jnz frac1

    finished:   
        dec di
        cmp byte ptr [di],'0'
        je finished
        cmp byte ptr [di],'.'
        jne f2
        dec di
    f2:
        mov byte ptr [di+1],'$'
    exit2:
        jmp exit


    l11:
        fild word ptr [d3]
        fstp dword ptr [bx+2]
    l111:
        cmp si,di
        je ret
        lodsb
        cmp al,10
        je exit2
        jg ret
        mov [bx],al
        fild word ptr [bx]
        fdiv dword ptr [bx+2]
        faddp
        fld dword ptr [bx+2]
        fimul word ptr [d3]
        fstp dword ptr [bx+2]
        jmp l111


    d1: db '0123456789.-+/*()', 32, 9
    d3: dw 10
    op: db 0e9h, 0c1h, 0f9h, 0c9h
    cw: dw 0f7fh
    zero: dw 0
    res:db 'Error$'
    s:  dw (offset s)+2
finnw

Ruby

Number of characters: 103

N='( *-?[\d.]+ *)'
def e x
x.sub!(/\(#{N}\)|#{N}([^.\d])#{N}/){$1or(e$2).send$3,e($4)}?e(x):x.to_f
end

This is a non-recursive version of The Wicked Flea's solution. Parenthesized sub-expressions are evaluated bottom-up instead of top-down.

Edit: Converting the 'while' to a conditional + tail recursion has saved a few characters, so it is no longer non-recursive (though the recursion is not semantically necessary.)

Edit: Borrowing Daniel Martin's idea of merging the regexps saves another 11 characters!

Edit: That recursion is even more useful than I first thought! x.to_f can be rewritten as e(x), if x happens to contain a single number.

Edit: Using 'or' instead of '||' allows a pair of parentheses to be dropped.

Long version:

# Decimal number, as a capturing group, for substitution
# in the main regexp below.
N='( *-?[\d.]+ *)'

# The evaluation function
def e(x)
  matched = x.sub!(/\(#{N}\)|#{N}([^\d.])#{N}/) do
    # Group 1 is a numeric literal in parentheses.  If this is present then
    # just return it.
    if $1
      $1
    # Otherwise, $3 is an operator symbol and $2 and $4 are the operands
    else
      # Recursively call e to parse the operands (we already know from the
      # regexp that they are numeric literals, and this is slightly shorter
      # than using :to_f)
      e($2).send($3, e($4))
      # We could have converted $3 to a symbol ($3.to_s) or converted the
      # result back to string form, but both are done automatically anyway
    end
  end
  if matched then
    # We did one reduction. Now recurse back and look for more.
    e(x)
  else
    # If the string doesn't look like a non-trivial expression, assume it is a
    # string representation of a real number and attempt to parse it
    x.to_f
  end
end
Skizz

C (VS2005)

Number of Characters: 1360

Abuse of preprocessor and warnings for fun code layout (scroll down to see):

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define b main
#define c(a) b(a,0)
#define d -1
#define e -2
#define g break
#define h case
#define hh h
#define hhh h
#define w(i) case i
#define i return
#define j switch
#define k float
#define l realloc
#define m sscanf
#define n int _
#define o char
#define t(u) #u
#define q(r) "%f" t(r)  "n"
#define s while
#define v default
#define ex exit
#define W printf
#define x fn()
#define y strcat
#define z strcpy
#define Z strlen

char*p    =0    ;k    *b    (n,o**    a){k*f
;j(_){    hh   e:     i*    p==40?    (++p,c
(d        ))  :(      f=        l(        0,
4)        ,m (p       ,q        (%        ),
f,&_),    p+=_        ,f       );        hh
d:f=c(    e);s        (1      ){        j(
    *p    ++ ){       hh     0:        hh
    41    :i  f;      hh    43        :*
f+=*c(    e)   ;g     ;h    45:*f=    *f-*c(
e);g;h    42    :*    f=    *f**c(    e);g;h

47:*f      /=*c      (e);     g;   v:    c(0);}
}w(1):    if(p&&    printf    (q  ((     "\\"))
,*  c(    d)  ))    g;  hh    0: ex      (W
(x  ))    ;v  :p    =(        p?y:       z)(l(p
,Z(1[     a]  )+    (p        ?Z(p           )+
1:1))     ,1  [a    ])  ;b    (_ -1          ,a
+1  );    g;  }i    0;};fn    ()  {n     =42,p=
43  ;i     "Er"      "ro"     t(   r)    "\n";}

Visual Basic.NET

Number of characters: 9759

I'm more of a bowler myself.

NOTE: does not take nested parentheses into account. Also, untested, but I'm pretty sure it works.

Imports Microsoft.VisualBasic
Imports System.Text
Imports System.Collections.Generic
Public Class Main
Public Shared Function DoArithmaticFunctionFromStringInput(ByVal MathematicalString As String) As Double
    Dim numberList As New List(Of Number)
    Dim operationsList As New List(Of IOperatable)
    Dim currentNumber As New Number
    Dim currentParentheticalStatement As New Parenthetical
    Dim isInParentheticalMode As Boolean = False
    Dim allCharactersInString() As Char = MathematicalString.ToCharArray
    For Each mathChar In allCharactersInString
        If mathChar = Number.ZERO_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.ONE_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.TWO_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.THREE_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.FOUR_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.FIVE_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.SIX_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.SEVEN_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.EIGHT_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.NINE_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Number.DECIMAL_POINT_STRING_REPRESENTATION Then
            currentNumber.UpdateNumber(mathChar)
        ElseIf mathChar = Addition.ADDITION_STRING_REPRESENTATION Then
            Dim addition As New Addition

            If Not isInParentheticalMode Then
                operationsList.Add(addition)
                numberList.Add(currentNumber)
            Else
                currentParentheticalStatement.AllNumbers.Add(currentNumber)
                currentParentheticalStatement.AllOperators.Add(addition)
            End If

            currentNumber = New Number
        ElseIf mathChar = Number.NEGATIVE_NUMBER_STRING_REPRESENTATION Then
            If currentNumber.StringOfNumbers.Length > 0 Then
                currentNumber.UpdateNumber(mathChar)

                Dim subtraction As New Addition
                If Not isInParentheticalMode Then
                    operationsList.Add(subtraction)
                    numberList.Add(currentNumber)
                Else
                    currentParentheticalStatement.AllNumbers.Add(currentNumber)
                    currentParentheticalStatement.AllOperators.Add(subtraction)
                End If

                currentNumber = New Number
            Else
                currentNumber.UpdateNumber(mathChar)
            End If
        ElseIf mathChar = Multiplication.MULTIPLICATION_STRING_REPRESENTATION Then
            Dim multiplication As New Multiplication

            If Not isInParentheticalMode Then
                operationsList.Add(multiplication)
                numberList.Add(currentNumber)
            Else
                currentParentheticalStatement.AllNumbers.Add(currentNumber)
                currentParentheticalStatement.AllOperators.Add(multiplication)
            End If
            currentNumber = New Number
        ElseIf mathChar = Division.DIVISION_STRING_REPRESENTATION Then
            Dim division As New Division

            If Not isInParentheticalMode Then
                operationsList.Add(division)
                numberList.Add(currentNumber)
            Else
                currentParentheticalStatement.AllNumbers.Add(currentNumber)
                currentParentheticalStatement.AllOperators.Add(division)
            End If
            currentNumber = New Number
        ElseIf mathChar = Parenthetical.LEFT_PARENTHESIS_STRING_REPRESENTATION Then
            isInParentheticalMode = True
        ElseIf mathChar = Parenthetical.RIGHT_PARENTHESIS_STRING_REPRESENTATION Then
            currentNumber = currentParentheticalStatement.EvaluateParentheticalStatement
            numberList.Add(currentNumber)
            isInParentheticalMode = False
        End If
    Next

    Dim result As Double = 0
    Dim operationIndex As Integer = 0
    For Each numberOnWhichToPerformOperations As Number In numberList
        result = operationsList(operationIndex).PerformOperation(result, numberOnWhichToPerformOperations)
        operationIndex = operationIndex + 1
    Next

    Return result

End Function
Public Class Number
    Public Const DECIMAL_POINT_STRING_REPRESENTATION As Char = "."
    Public Const NEGATIVE_NUMBER_STRING_REPRESENTATION As Char = "-"
    Public Const ZERO_STRING_REPRESENTATION As Char = "0"
    Public Const ONE_STRING_REPRESENTATION As Char = "1"
    Public Const TWO_STRING_REPRESENTATION As Char = "2"
    Public Const THREE_STRING_REPRESENTATION As Char = "3"
    Public Const FOUR_STRING_REPRESENTATION As Char = "4"
    Public Const FIVE_STRING_REPRESENTATION As Char = "5"
    Public Const SIX_STRING_REPRESENTATION As Char = "6"
    Public Const SEVEN_STRING_REPRESENTATION As Char = "7"
    Public Const EIGHT_STRING_REPRESENTATION As Char = "8"
    Public Const NINE_STRING_REPRESENTATION As Char = "9"

    Private _isNegative As Boolean
    Public ReadOnly Property IsNegative() As Boolean
        Get
            Return _isNegative
        End Get
    End Property
    Public ReadOnly Property ActualNumber() As Double
        Get
            Dim result As String = ""
            If HasDecimal Then
                If DecimalIndex = StringOfNumbers.Length - 1 Then
                    result = StringOfNumbers.ToString
                Else
                    result = StringOfNumbers.Insert(DecimalIndex, DECIMAL_POINT_STRING_REPRESENTATION).ToString
                End If
            Else
                result = StringOfNumbers.ToString
            End If
            If IsNegative Then
                result = NEGATIVE_NUMBER_STRING_REPRESENTATION & result
            End If
            Return CType(result, Double)
        End Get
    End Property
    Private _hasDecimal As Boolean
    Public ReadOnly Property HasDecimal() As Boolean
        Get
            Return _hasDecimal
        End Get
    End Property
    Private _decimalIndex As Integer
    Public ReadOnly Property DecimalIndex() As Integer
        Get
            Return _decimalIndex
        End Get
    End Property
    Private _stringOfNumbers As New StringBuilder
    Public ReadOnly Property StringOfNumbers() As StringBuilder
        Get
            Return _stringOfNumbers
        End Get
    End Property
    Public Sub UpdateNumber(ByVal theDigitToAppend As Char)
        If IsNumeric(theDigitToAppend) Then
            Me._stringOfNumbers.Append(theDigitToAppend)
        ElseIf theDigitToAppend = DECIMAL_POINT_STRING_REPRESENTATION Then
            Me._hasDecimal = True
            Me._decimalIndex = Me._stringOfNumbers.Length
        ElseIf theDigitToAppend = NEGATIVE_NUMBER_STRING_REPRESENTATION Then
            Me._isNegative = Not Me._isNegative
        End If
    End Sub
    Public Shared Function ConvertDoubleToNumber(ByVal numberThatIsADouble As Double) As Number
        Dim numberResult As New Number
        For Each character As Char In numberThatIsADouble.ToString.ToCharArray
            numberResult.UpdateNumber(character)
        Next
        Return numberResult
    End Function
End Class
Public MustInherit Class Operation
    Protected _firstnumber As New Number
    Protected _secondnumber As New Number
    Public Property FirstNumber() As Number
        Get
            Return _firstnumber
        End Get
        Set(ByVal value As Number)
            _firstnumber = value
        End Set
    End Property
    Public Property SecondNumber() As Number
        Get
            Return _secondnumber
        End Get
        Set(ByVal value As Number)
            _secondnumber = value
        End Set
    End Property
End Class
Public Interface IOperatable
    Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double
End Interface
Public Class Addition
    Inherits Operation
    Implements IOperatable
    Public Const ADDITION_STRING_REPRESENTATION As String = "+"
    Public Sub New()

    End Sub
    Public Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double Implements IOperatable.PerformOperation
        Dim result As Double = 0
        result = number1 + number2.ActualNumber
        Return result
    End Function
End Class
Public Class Multiplication
    Inherits Operation
    Implements IOperatable
    Public Const MULTIPLICATION_STRING_REPRESENTATION As String = "*"
    Public Sub New()

    End Sub
    Public Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double Implements IOperatable.PerformOperation
        Dim result As Double = 0
        result = number1 * number2.ActualNumber
        Return result
    End Function
End Class
Public Class Division
    Inherits Operation
    Implements IOperatable
    Public Const DIVISION_STRING_REPRESENTATION As String = "/"
    Public Const DIVIDE_BY_ZERO_ERROR_MESSAGE As String = "I took a lot of time to write this program. Please don't be a child and try to defile it by dividing by zero. Nobody thinks you are funny."
    Public Sub New()

    End Sub
    Public Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double Implements IOperatable.PerformOperation
        If Not number2.ActualNumber = 0 Then
            Dim result As Double = 0
            result = number1 / number2.ActualNumber
            Return result
        Else
            Dim divideByZeroException As New Exception(DIVIDE_BY_ZERO_ERROR_MESSAGE)
            Throw divideByZeroException
        End If
    End Function
End Class
Public Class Parenthetical
    Public Const LEFT_PARENTHESIS_STRING_REPRESENTATION As String = "("
    Public Const RIGHT_PARENTHESIS_STRING_REPRESENTATION As String = ")"
    Private _allNumbers As New List(Of Number)
    Public Property AllNumbers() As List(Of Number)
        Get
            Return _allNumbers
        End Get
        Set(ByVal value As List(Of Number))
            _allNumbers = value
        End Set
    End Property
    Private _allOperators As New List(Of IOperatable)
    Public Property AllOperators() As List(Of IOperatable)
        Get
            Return _allOperators
        End Get
        Set(ByVal value As List(Of IOperatable))
            _allOperators = value
        End Set
    End Property
    Public Sub New()

    End Sub
    Public Function EvaluateParentheticalStatement() As Number
        Dim result As Double = 0
        Dim operationIndex As Integer = 0
        For Each numberOnWhichToPerformOperations As Number In AllNumbers
            result = AllOperators(operationIndex).PerformOperation(result, numberOnWhichToPerformOperations)
            operationIndex = operationIndex + 1
        Next

        Dim numberToReturn As New Number
        numberToReturn = Number.ConvertDoubleToNumber(result)
        Return numberToReturn
    End Function
End Class
End Class
ephemient

Haskell

Number of characters: 182

No attempt at cleverness, just some compression: 4 lines, 312 bytes.

import Data.Char;import Text.ParserCombinators.Parsec
q=either(error.show)id.runParser t id"".filter(' '/=);t=do
s<-getState;a<-fmap read(many1$oneOf".-"<|>digit)<|>between(char '('>>setState id)(char ')'>>setState s)t
option(s a)$choice(zipWith(\c o->char c>>return(o$s a))"+-*/"[(+),(-),(*),(/)])>>=setState>>t

And now, really getting into the golf spirit, 3 lines and 182 bytes:

q=snd.(`e`id).filter(' '/=)
e s c|[(f,h)]<-readsPrec 0 s=g h(c f);e('(':s)c=g h(c f)where(')':h,f)=e s id
g('+':h)=e h.(+);g('-':h)=e h.(-);g('*':h)=e h.(*);g('/':h)=e h.(/);g h=(,)h

Exploded:

-- Strip spaces from the input, evaluate with empty accumulator,
-- and output the second field of the result.
q :: String -> Double
q = snd . flip eval id . filter (not . isSpace)

-- eval takes a string and an accumulator, and returns
-- the final value and what’s left unused from the string.
eval :: (Fractional a, Read a) => String -> (a -> a) -> (String, a)

-- If the beginning of the string parses as a number, add it to the accumulator,
-- then try to read an operator and further.
eval str accum | [(num, rest)] <- readsPrec 0 str = oper rest (accum num)

-- If the string starts parentheses, evaluate the inside with a fresh
-- accumulator, and continue after the closing paren.
eval ('(':str) accum = oper rest (accum num) where (')':rest, num) = eval str id

-- oper takes a string and current value, and tries to read an operator
-- to apply to the value.  If there is none, it’s okay.
oper :: (Fractional a, Read a) => String -> a -> (String, a)

-- Handle operations by giving eval a pre-seeded accumulator.
oper ('+':str) num = eval str (num +)
oper ('-':str) num = eval str (num -)
oper ('*':str) num = eval str (num *)
oper ('/':str) num = eval str (num /)

-- If there’s no operation parsable, just return.
oper str num = (str, num)
Dave

Python

Number of characters: 237

Fully obfuscated function:

from operator import*
def e(s,l=[]):
 if s:l+=list(s.replace(' ','')+')')
 a=0;o=add;d=dict(zip(')*+-/',(0,mul,o,sub,div)));p=l.pop
 while o:
  c=p(0)
  if c=='(':c=e(0)
  while l[0]not in d:c+=p(0)
  a=o(a,float(c));o=d[p(0)]
 return a

Clear/semi-obfuscated function:

import operator

def calc(source, stack=[]):
    if source:
        stack += list(source.replace(' ', '') + ')')

    answer = 0

    ops = {
        ')': 0,
        '*': operator.mul,
        '+': operator.add,
        '-': operator.sub,
        '/': operator.div,
    }

    op = operator.add
    while op:
        cur = stack.pop(0)

        if cur == '(':
            cur = calc(0)

        while stack[0] not in ops:
            cur += stack.pop(0)

        answer = op(answer, float(cur))
        op = ops[stack.pop(0)]

    return answer
dmckee

Fortran 77 (gfortran dialect, now with g77 support)

Number of characters: 2059

Obfuscated version:

      function e(c)
      character*99 c
      character b
      real f(24)                
      integer i(24)             
      nf=0                      
      ni=0                      
 20   nf=kf(0.0,nf,f)
      ni=ki(43,ni,i)         
 30   if (isp(c).eq.1) goto 20
      h=fr(c)
 31   g=fp(nf,f)
      j=ip(ni,i)
      select case(j)
      case (40) 
         goto 20
      case (42)                 
         d=g*h
      case (43)                 
         d=g+h
      case (45)                 
         d=g-h
      case (47)                 
         d=g/h
      end select
 50   nf=kf(d,nf,f)
 60   j=nop(c)
      goto (20, 70, 75, 75, 60, 75, 60, 75) (j-39)
 65   e=fp(nf,f)
      return
 70   h=fp(nf,f)              
      goto 31
 75   ni=ki(j,ni,i)
      goto 30
      end
      function kf(v,n,f)
      real f(24)
      kf=n+1
      f(n+1)=v
      return
      end
      function ki(j,n,i)
      integer i(24)
      ki=n+1
      i(n+1)=j
      return
      end
      function fp(n,f)
      real f(24)
      fp=f(n)
      n=n-1
      return
      end
      function ip(n,i)
      integer i(24)
      ip=i(n)
      n=n-1
      return
      end
      function nop(s)
      character*99 s
      l=1
      do while(s(l:l).eq." ".and.l.lt.99)
         l=l+1
      enddo
      nop=ichar(s(l:l))
      s(l:l)=" "
      return
      end
      function isp(s)
      character*99 s
      isp=0
      l=1
      do while(s(l:l).eq." ".and.l.lt.99)
         l=l+1
      enddo
      isp=41-ichar(s(l:l))
      if (isp.eq.1) s(l:l)=" "
      return
      end
      function fr(s)
      character*99 s
      m=1                      
      n=1                      
      i=1
      do while(i.le.99)
         j=ichar(s(i:i))
         if (j.eq.32) goto 90   
         if (j.ge.48.and.j.lt.58) goto 89
         if (j.eq.43.or.j.eq.45) goto (89,80) m
         if (j.eq.46) goto (83,80) n
 80      exit
 83      n=2
 89      m=2
 90      i=i+1
      enddo
      read(s(1:i-1),*) fr
      do 91 j=1,i-1
         s(j:j)=" "
 91   continue
      return 
      end

Clear version: (3340 characters with scaffold)

      program infixeval
      character*99 c
      do while (.true.)
         do 10 i=1,99
            c(i:i)=" "
 10      continue
         read(*,"(A99)") c
         f=e(c)
         write(*,*)f
      enddo
      end

      function e(c)
      character*99 c
      character b
      real f(24)                ! value stack
      integer i(24)             ! operator stack
      nf=0                      ! number of items on the value stack
      ni=0                      ! number of items on the operator stack
 20   nf=pushf(0.0,nf,f)
      ni=pushi(43,ni,i)         ! ichar(+) = 43
D     write (*,*) "'",c,"'"
 30   if (isp(c).eq.1) goto 20
      h=fr(c)
D     write (*,*) "'",c,"'"
 31   g=fpop(nf,f)
      j=ipop(ni,i)
D     write(*,*) "Opperate ",g," ",char(j)," ",h
      select case(j)
      case (40) 
         goto 20
      case (42)                 ! "*" 
         d=g*h
      case (43)                 ! "+"
         d=g+h
      case (45)                 ! "-"
         d=g-h
      case (47)                 ! "*"
         d=g/h
      end select
 50   nf=pushf(d,nf,f)
 60   j=nop(c)
D     write(*,*) "Got op: ", char(j)
      goto (20, 70, 75, 75, 60, 75, 60, 75) (j-39)
 65   e=fpop(nf,f)
      return
 70   h=fpop(nf,f)              ! Encountered a "("
      goto 31
 75   ni=pushi(j,ni,i)
      goto 30
      end

c     push onto a real stack
c     OB as kf
      function pushf(v,n,f)
      real f(24)
      pushf=n+1
      f(n+1)=v
D     write(*,*) "Push ", v
      return
      end

c     push onto a integer stack
c     OB as ki
      function pushi(j,n,i)
      integer i(24)
      pushi=n+1
      i(n+1)=j
D     write(*,*) "Push ", char(j)
      return
      end

c     pop from real stack
c     OB as fp
      function fpop(n,f)
      real f(24)
      fpop=f(n)
      n=n-1
D      write (*,*) "Pop ", fpop
      return
      end

c     pop from integer stack
c     OB as ip
      function ipop(n,i)
      integer i(24)
      ipop=i(n)
      n=n-1
D      write (*,*) "Pop ", char(ipop)
      return
      end

c     Next OPerator: returns the next nonws character, and removes it
c     from the string
      function nop(s)
      character*99 s
      l=1
      do while(s(l:l).eq." ".and.l.lt.99)
         l=l+1
      enddo
      nop=ichar(s(l:l))
      s(l:l)=" "
      return
      end

c     IS an open Paren: return 1 if the next non-ws character is "("
c     (also overwrite it with a space. Otherwise return not 1
      function isp(s)
      character*99 s
      isp=0
      l=1
      do while(s(l:l).eq." ".and.l.lt.99)
         l=l+1
      enddo
      isp=41-ichar(s(l:l))
      if (isp.eq.1) s(l:l)=" "
      return
      end

c     Float Read: return the next real number in the string and removes the
c     character
      function fr(s)
      character*99 s
      m=1                      ! No sign (Minus or plus) so far
      n=1                      ! No decimal so far
      i=1
      do while(i.le.99)
         j=ichar(s(i:i))
         if (j.eq.32) goto 90   ! skip spaces
         if (j.ge.48.and.j.lt.58) goto 89
         if (j.eq.43.or.j.eq.45) goto (89,80) m
         if (j.eq.46) goto (83,80) n
c     not part of a number
 80      exit
 83      n=2
 89      m=2
 90      i=i+1
      enddo
      read(s(1:i-1),*) fr
      do 91 j=1,i-1
         s(j:j)=" "
 91   continue
      return 
      end

Notes This edited version is rather more evil than my first attempt. Same algorithm, but now inline with a horrible tangle of gotos. I've ditched the co-routines, but am now using a couple of flavors of computed branches. All error checking and reporting has been removed, but this version will silently recover from some classes of unexpected characters in the input. This version also compiles with g77.

The primary limits are still fortran's rigid formatting, long and ubiquitous keywords, and simple primitives.

Ferruccio

C99

Number of characters: 239 (But see below for 209)

compressed function:

#define S while(*e==32)++e
#define F float
F strtof();char*e;F v();F g(){S;return*e++-40?strtof(e-1,&e):v();}F v(){F b,a=g();for(;;){S;F o=*e++;if(!o|o==41)return a;b=g();a=o==43?a+b:o==45?a-b:o==42?a*b:a/b;}}F f(char*x){e=x;return v();}

decompressed function:

float strtof();

char* e;
float v();

float g() {
    while (*e == ' ') ++e;
    return *e++ != '(' ? strtof(e-1, &e) : v();
}

float v() {
    float b, a = g();
    for (;;) {
        while (*e == ' ') ++e;
        float op = *e++;
        if (op == 0 || op == ')') return a;
        b = g();
        a = op == '+' ? a + b : op == '-' ? a - b : op == '*' ? a * b : a / b;
    }
}

float eval(char* x) {
    e = x;
    return v();
}

Function is not re-entrant.

EDIT from Chris Lutz: I hate to trample on another man's code, but here is a 209-character version:

#define S for(;*e==32;e++)
#define X (*e++-40?strtof(e-1,&e):v())
float strtof();char*e;float v(){float o,a=X;for(;;){S;o=*e++;if(!o|o==41)return a;S;a=o-43?o-45?o-42?a/X:a*X:a-X:a+X;}}
#define f(x) (e=x,v())

Readable (well, not really very readable, but decompressed):

float strtof();
char *e;
float v() {
    float o, a = *e++ != '(' ? strtof(e - 1, &e) : v();
    for(;;) {
        for(; *e == ' '; e++);
        o = *e++;
        if(o == 0 || o==')') return a;
        for(; *e == ' '; e++);
        // I have no idea how to properly indent nested conditionals
        // and this is far too long to fit on one line.
        a = o != '+' ?
          o != '-' ?
            o != '*' ?
              a / (*e++ != '(' ? strtof(e - 1, &e) : v()) :
              a * (*e++ != '(' ? strtof(e - 1, &e) : v()) :
            a - (*e++ != '(' ? strtof(e - 1, &e) : v()) :
          a + (*e++ != '(' ? strtof(e - 1, &e) : v());
      }
}
#define f(x) (e = x, v())

Yeah, f() is a macro, not a function, but it works. The readable version has some of the logic rewritten but not reordered (like o != '+' instead of o - '+'), but is otherwise just an indented (and preprocessed) version of the other one. I keep trying to simplify the if(!o|o==41)return a; part into the for() loop, but it never makes it shorter. I still believe it can be done, but I'm done golfing. If I work on this question anymore, it will be in the language that must not be named.

Johan Benum Evensberget

Common Lisp

(SBCL)
Number of characters: 251

(defun g(e)(if(numberp e)e(let((m (g (pop e)))(o(loop for x in e by #'cddr collect x))(n(loop for x in (cdr e)by #'cddr collect (g x))))(mapcar(lambda(x y)(setf m(apply x(list m y))))o n)m)))(defun w(e)(g(read-from-string(concatenate'string"("e")"))))

Proper version (387 chars):

(defun wrapper (exp) (golf-eval (read-from-string (concatenate 'string "(" exp ")"))))

(defun golf-eval (exp)
 (if (numberp exp)
     exp
   (let ((mem (golf-eval (pop exp)))
     (op-list (loop for x in exp by #'cddr collect x))
     (num-list (loop for x in (cdr exp) by #'cddr collect (golf-eval x))))
    (mapcar (lambda (x y) (setf mem (apply x (list mem y)))) op-list num-list)
    mem)))

Input is form w(), which takes one string argument. It uses the trick that nums/operands and operators are in the pattern N O N O N ... and recursively evaluates all operands, and therefore getting nesting very cheap. ;)

Matthew Crumley

JavaScript (Not IE compatible)

Number of characters: 268/260

Fully obfuscated function:

function e(x){x=x.replace(/ /g,'')+')'
function P(n){return x[0]=='('?(x=x.substr(1),E()):(n=/^[-+]?[\d.]+/(x)[0],x=x.substr(n.length),+n)}function E(a,o,b){a=P()
for(;;){o=x[0]
x=x.substr(1)
if(o==')')return a
b=P()
a=o=='+'?a+b:o=='-'?a-b:o=='*'?a*b:a/b}}return E()}

or, in JavaScript 1.8 (Firefox 3+), you can save a few characters by using expression closures:

e=function(x,P,E)(x=x.replace(/ /g,'')+')',P=function(n)(x[0]=='('?(x=x.substr(1),E()):(n=/^[-+]?[\d.]+/(x)[0],x=x.substr(n.length),+n)),E=function(a,o,b){a=P()
for(;;){o=x[0]
x=x.substr(1)
if(o==')')return a
b=P()
a=o=='+'?a+b:o=='-'?a-b:o=='*'?a*b:a/b}},E())

Clear/semi-obfuscated function:

function evaluate(x) {
    x = x.replace(/ /g, "") + ")";
    function primary() {
        if (x[0] == '(') {
            x = x.substr(1);
            return expression();
        }

        var n = /^[-+]?\d*\.?\d*/.exec(x)[0];
        x = x.substr(n.length);
        return +n;
    }

    function expression() {
        var a = primary();
        for (;;) {
            var operator = x[0];
            x = x.substr(1);

            if (operator == ')') {
                return a;
            }

            var b = primary();
            a = (operator == '+') ? a + b :
                (operator == '-') ? a - b :
                (operator == '*') ? a * b :
                                    a / b;
        }
    }

    return expression();
}

Neither version will work in IE, because they use array-style subscripting on the string. If you replace both occurrences of x[0] with x.charAt(0), the first one should work everywhere.

I cut out some more characters since the first version by turning variables into function parameters and replacing another if statement with the conditional operator.

Jeff Moser

C# with Regex Love

Number of characters: 384

Fully-obfuscated:

float E(string i){i=i.Replace(" ","");Regex b=new Regex(@"\((?>[^()]+|\((?<D>)|\)(?<-D>))*(?(D)(?!))\)");i=b.Replace(i,m=>Eval(m.Value.Substring(1,m.Length-2)).ToString());float r=0;foreach(Match m in Regex.Matches(i,@"(?<=^|\D)-?[\d.]+")){float f=float.Parse(m.Value);if(m.Index==0)r=f;else{char o=i[m.Index-1];if(o=='+')r+=f;if(o=='-')r-=f;if(o=='*')r*=f;if(o=='/')r/=f;}}return r;}

Not-obfuscated:

private static float Eval(string input)
{
    input = input.Replace(" ", "");
    Regex balancedMatcher = new Regex(@"\(
                                            (?>
                                                [^()]+
                                            |
                                                \( (?<Depth>)
                                            |
                                                \) (?<-Depth>)
                                            )*
                                            (?(Depth)(?!))
                                        \)", RegexOptions.IgnorePatternWhitespace);
    input = balancedMatcher.Replace(input, m => Eval(m.Value.Substring(1, m.Length - 2)).ToString());

    float result = 0;

    foreach (Match m in Regex.Matches(input, @"(?<=^|\D)-?[\d.]+"))
    {
        float floatVal = float.Parse(m.Value);
        if (m.Index == 0)
        {
            result = floatVal;
        }
        else
        {
            char op = input[m.Index - 1];
            if (op == '+') result += floatVal;
            if (op == '-') result -= floatVal;
            if (op == '*') result *= floatVal;
            if (op == '/') result /= floatVal;
        }
    }

    return result;
}

Takes advantage of .NET's Regex balancing group feature.

soulmerge

PHP

Number of characters: 284

obfuscated:

function f($m){return c($m[1]);}function g($n,$m){$o=$m[0];$m[0]=' ';return$o=='+'?$n+$m:($o=='-'?$n-$m:($o=='*'?$n*$m:$n/$m));}function c($s){while($s!=($t=preg_replace_callback('/\(([^()]*)\)/',f,$s)))$s=$t;preg_match_all('![-+/*].*?[\d.]+!',"+$s",$m);return array_reduce($m[0],g);}

readable:

function callback1($m) {return c($m[1]);}
function callback2($n,$m) {
    $o=$m[0];
    $m[0]=' ';
    return $o=='+' ? $n+$m : ($o=='-' ? $n-$m : ($o=='*' ? $n*$m : $n/$m));
}
function c($s){ 
    while ($s != ($t = preg_replace_callback('/\(([^()]*)\)/','callback1',$s))) $s=$t;
    preg_match_all('![-+/*].*?[\d.]+!', "+$s", $m);
    return array_reduce($m[0], 'callback2');
}


$str = '  2.45/8.5  *  -9.27   +    (   5   *  0.0023  ) ';
var_dump(c($str));
# float(-2.66044117647)

Should work with any valid input (including negative numbers and arbitrary whitespace)

SQL (SQL Server 2008)

Number of characters: 4202

Fully obfuscated function:

WITH Input(id,str)AS(SELECT 1,'1 + 3 / -8'UNION ALL SELECT 2,'2*3*4*5+99'UNION ALL SELECT 3,'4 * (9 - 4)/ (2 * 6 - 2)+ 8'UNION ALL SELECT 4,'1 + ((123 * 3 - 69)/ 100)'UNION ALL SELECT 5,'2.45/8.5*9.27+(5*0.0023)'),Separators(i,ch,str_src,priority)AS(SELECT 1,'-',1,1UNION ALL SELECT 2,'+',1,1UNION ALL SELECT 3,'*',1,1UNION ALL SELECT 4,'/',1,1UNION ALL SELECT 5,'(',0,0UNION ALL SELECT 6,')',0,0),SeparatorsStrSrc(str,i)AS(SELECT CAST('['AS varchar(max)),0UNION ALL SELECT str+ch,SSS.i+1FROM SeparatorsStrSrc SSS INNER JOIN Separators S ON SSS.i=S.i-1WHERE str_src<>0),SeparatorsStr(str)AS(SELECT str+']'FROM SeparatorsStrSrc WHERE i=(SELECT COUNT(*)FROM Separators WHERE str_src<>0)),ExprElementsSrc(id,i,tmp,ele,pre_ch,input_str)AS(SELECT id,1,CAST(LEFT(str,1)AS varchar(max)),CAST(''AS varchar(max)),CAST(' 'AS char(1)),SUBSTRING(str,2,LEN(str))FROM Input UNION ALL SELECT id,CASE ele WHEN''THEN i ELSE i+1 END,CAST(CASE WHEN LEFT(input_str,1)=' 'THEN''WHEN tmp='-'THEN CASE WHEN pre_ch LIKE(SELECT str FROM SeparatorsStr)THEN tmp+LEFT(input_str,1)ELSE LEFT(input_str,1)END WHEN LEFT(input_str,1)IN(SELECT ch FROM Separators)OR tmp IN(SELECT ch FROM Separators)THEN LEFT(input_str,1)ELSE tmp+LEFT(input_str,1)END AS varchar(max)),CAST(CASE WHEN LEFT(input_str,1)=' 'THEN tmp WHEN LEFT(input_str,1)='-'THEN CASE WHEN tmp IN(SELECT ch FROM Separators)THEN tmp ELSE''END WHEN LEFT(input_str,1)IN(SELECT ch FROM Separators)OR tmp IN(SELECT ch FROM Separators)THEN CASE WHEN tmp='-'AND pre_ch LIKE(SELECT str FROM SeparatorsStr)THEN''ELSE tmp END ELSE''END AS varchar(max)),CAST(LEFT(ele,1)AS char(1)),SUBSTRING(input_str,2,LEN(input_str))FROM ExprElementsSrc WHERE input_str<>''OR tmp<>''),ExprElements(id,i,ele)AS(SELECT id,i,ele FROM ExprElementsSrc WHERE ele<>''),Scanner(id,i,val)AS(SELECT id,i,CAST(ele AS varchar(max))FROM ExprElements WHERE ele<>''UNION ALL SELECT id,MAX(i)+1,NULL FROM ExprElements GROUP BY id),Operator(op,priority)AS(SELECT ch,priority FROM Separators WHERE priority<>0),Calc(id,c,i,pop_count,s0,s1,s2,stack,status)AS(SELECT Scanner.id,1,1,0,CAST(scanner.val AS varchar(max)),CAST(NULL AS varchar(max)),CAST(NULL AS varchar(max)),CAST(''AS varchar(max)),CAST('init'AS varchar(max))FROM Scanner WHERE Scanner.i=1UNION ALL SELECT Calc.id,Calc.c+1,Calc.i,3,NULL,NULL,NULL,CASE Calc.s1 WHEN'+'THEN CAST(CAST(Calc.s2 AS real)+CAST(Calc.s0 AS real)AS varchar(max))WHEN'-'THEN CAST(CAST(Calc.s2 AS real)-CAST(Calc.s0 AS real)AS varchar(max))WHEN'*'THEN CAST(CAST(Calc.s2 AS real)*CAST(Calc.s0 AS real)AS varchar(max))WHEN'/'THEN CAST(CAST(Calc.s2 AS real)/CAST(Calc.s0 AS real)AS varchar(max))ELSE NULL END+' '+stack,CAST('calc '+Calc.s1 AS varchar(max))FROM Calc INNER JOIN Scanner NextVal ON Calc.id=NextVal.id AND Calc.i+1=NextVal.i WHERE Calc.pop_count=0AND ISNUMERIC(Calc.s2)=1AND Calc.s1 IN(SELECT op FROM Operator)AND ISNUMERIC(Calc.s0)=1AND(SELECT priority FROM Operator WHERE op=Calc.s1)>=COALESCE((SELECT priority FROM Operator WHERE op=NextVal.val),0)UNION ALL SELECT Calc.id,Calc.c+1,Calc.i,3,NULL,NULL,NULL,s1+' '+stack,CAST('paren'AS varchar(max))FROM Calc WHERE pop_count=0AND s2='('AND ISNUMERIC(s1)=1AND s0=')'UNION ALL SELECT Calc.id,Calc.c+1,Calc.i,Calc.pop_count-1,s1,s2,CASE WHEN LEN(stack)>0THEN SUBSTRING(stack,1,CHARINDEX(' ',stack)-1)ELSE NULL END,CASE WHEN LEN(stack)>0THEN SUBSTRING(stack,CHARINDEX(' ',stack)+1,LEN(stack))ELSE''END,CAST('pop'AS varchar(max))FROM Calc WHERE Calc.pop_count>0UNION ALL SELECT Calc.id,Calc.c+1,Calc.i+1,Calc.pop_count,CAST(NextVal.val AS varchar(max)),s0,s1,coalesce(s2,'')+' '+stack,cast('read'as varchar(max))FROM Calc INNER JOIN Scanner NextVal ON Calc.id=NextVal.id AND Calc.i+1=NextVal.i WHERE NextVal.val IS NOT NULL AND Calc.pop_count=0AND((Calc.s0 IS NULL OR calc.s1 IS NULL OR calc.s2 IS NULL)OR NOT(ISNUMERIC(Calc.s2)=1AND Calc.s1 IN(SELECT op FROM Operator)AND ISNUMERIC(calc.s0)=1AND (SELECT priority FROM Operator WHERE op=Calc.s1)>=COALESCE((SELECT priority FROM Operator WHERE op=NextVal.val),0))AND NOT(s2='('AND ISNUMERIC(s1)=1AND s0=')')))SELECT Calc.id,Input.str,Calc.s0 AS result FROM Calc INNER JOIN Input ON Calc.id=Input.id WHERE Calc.c=(SELECT MAX(c)FROM Calc calc2 WHERE Calc.id=Calc2.id)ORDER BY id

Clear/semi-obfuscated function:

WITH
  Input(id, str) AS (    
    SELECT 1, '1 + 3 / -8'
    UNION ALL SELECT 2, '2*3*4*5+99'
    UNION ALL SELECT 3, '4 * (9 - 4) / (2 * 6 - 2) + 8'
    UNION ALL SELECT 4, '1 + ((123 * 3 - 69) / 100)'
    UNION ALL SELECT 5, '2.45/8.5*9.27+(5*0.0023)'
  )
, Separators(i, ch, str_src, priority) AS (
    SELECT 1, '-', 1, 1
    UNION ALL SELECT 2, '+', 1, 1
    UNION ALL SELECT 3, '*', 1, 1
    UNION ALL SELECT 4, '/', 1, 1
    UNION ALL SELECT 5, '(', 0, 0
    UNION ALL SELECT 6, ')', 0, 0
  )
, SeparatorsStrSrc(str, i) AS (
    SELECT CAST('[' AS varchar(max)), 0
    UNION ALL
    SELECT
        str + ch
      , SSS.i + 1
    FROM
        SeparatorsStrSrc SSS
          INNER JOIN Separators S ON SSS.i = S.i - 1
    WHERE
        str_src <> 0
  )
, SeparatorsStr(str) AS (
    SELECT str + ']' FROM SeparatorsStrSrc
    WHERE i = (SELECT COUNT(*) FROM Separators WHERE str_src <> 0)
  )
, ExprElementsSrc(id, i, tmp, ele, pre_ch, input_str) AS (
    SELECT
        id
      , 1
      , CAST(LEFT(str, 1) AS varchar(max))
      , CAST('' AS varchar(max))
      , CAST(' ' AS char(1))
      , SUBSTRING(str, 2, LEN(str))
    FROM
        Input
    UNION ALL
    SELECT
        id
      , CASE ele
        WHEN '' THEN i
                ELSE i + 1
        END
      , CAST(
          CASE
          WHEN LEFT(input_str, 1) = ' '
            THEN ''
          WHEN tmp = '-'
            THEN CASE
                 WHEN pre_ch LIKE (SELECT str FROM SeparatorsStr)
                   THEN tmp + LEFT(input_str, 1)
                   ELSE LEFT(input_str, 1)
                 END
          WHEN LEFT(input_str, 1) IN (SELECT ch FROM Separators)
               OR
               tmp IN (SELECT ch FROM Separators)
            THEN LEFT(input_str, 1)
            ELSE tmp + LEFT(input_str, 1)
          END
        AS varchar(max))
      , CAST(
          CASE
          WHEN LEFT(input_str, 1) = ' '
            THEN tmp
          WHEN LEFT(input_str, 1) = '-'
            THEN CASE
                 WHEN tmp IN (SELECT ch FROM Separators)
                   THEN tmp
                   ELSE ''
                 END
          WHEN LEFT(input_str, 1) IN (SELECT ch FROM Separators)
               OR
               tmp IN (SELECT ch FROM Separators)
            THEN CASE
                 WHEN tmp = '-' AND pre_ch LIKE (SELECT str FROM SeparatorsStr)
                   THEN ''
                   ELSE tmp
                 END
            ELSE ''
          END
        AS varchar(max))
      , CAST(LEFT(ele, 1) AS char(1))
      , SUBSTRING(input_str, 2, LEN(input_str))
    FROM
        ExprElementsSrc
    WHERE
        input_str <> ''
        OR
        tmp <> ''
  )
, ExprElements(id, i, ele) AS (
    SELECT
        id
      , i
      , ele
    FROM
        ExprElementsSrc
    WHERE
        ele <> ''
  )
, Scanner(id, i, val) AS (
    SELECT
        id
      , i
      , CAST(ele AS varchar(max))
    FROM
        ExprElements
    WHERE
        ele <> ''
    UNION ALL
    SELECT
        id
      , MAX(i) + 1
      , NULL
    FROM
        ExprElements
    GROUP BY
        id
  )
, Operator(op, priority) AS (
    SELECT
        ch
      , priority 
    FROM
        Separators
    WHERE
        priority <> 0
  )
, Calc(id, c, i, pop_count, s0, s1, s2, stack, status) AS (
    SELECT
        Scanner.id
      , 1
      , 1
      , 0
      , CAST(scanner.val AS varchar(max))
      , CAST(NULL AS varchar(max))
      , CAST(NULL AS varchar(max))
      , CAST('' AS varchar(max))
      , CAST('init' AS varchar(max))
    FROM
        Scanner
    WHERE
        Scanner.i = 1
    UNION ALL
    SELECT
        Calc.id
      , Calc.c + 1
      , Calc.i
      , 3
      , NULL
      , NULL
      , NULL
      , CASE Calc.s1
        WHEN '+' THEN CAST(CAST(Calc.s2 AS real) + CAST(Calc.s0 AS real) AS varchar(max))
        WHEN '-' THEN CAST(CAST(Calc.s2 AS real) - CAST(Calc.s0 AS real) AS varchar(max))
        WHEN '*' THEN CAST(CAST(Calc.s2 AS real) * CAST(Calc.s0 AS real) AS varchar(max))
        WHEN '/' THEN CAST(CAST(Calc.s2 AS real) / CAST(Calc.s0 AS real) AS varchar(max))
                 ELSE NULL
        END
          + ' '
          + stack
      , CAST('calc ' + Calc.s1 AS varchar(max))
    FROM
        Calc
          INNER JOIN Scanner NextVal ON Calc.id = NextVal.id
                                          AND Calc.i + 1 = NextVal.i
    WHERE
        Calc.pop_count = 0
          AND ISNUMERIC(Calc.s2) = 1
          AND Calc.s1 IN (SELECT op FROM Operator)
          AND ISNUMERIC(Calc.s0) = 1
          AND (SELECT priority FROM Operator WHERE op = Calc.s1)
            >= COALESCE((SELECT priority FROM Operator WHERE op = NextVal.val), 0)
    UNION ALL
    SELECT
        Calc.id
      , Calc.c + 1
      , Calc.i
      , 3
      , NULL
      , NULL
      , NULL
      , s1 + ' ' + stack
      , CAST('paren' AS varchar(max))
    FROM
        Calc
    WHERE
        pop_count = 0
          AND s2 = '('
          AND ISNUMERIC(s1) = 1
          AND s0 = ')'
    UNION ALL
    SELECT
        Calc.id
      , Calc.c + 1
      , Calc.i
      , Calc.pop_count - 1
      , s1
      , s2
      , CASE
        WHEN LEN(stack) > 0
          THEN SUBSTRING(stack, 1, CHARINDEX(' ', stack) - 1)
          ELSE NULL
        END
      , CASE
        WHEN LEN(stack) > 0
          THEN SUBSTRING(stack, CHARINDEX(' ', stack) + 1, LEN(stack))
          ELSE ''
        END
      , CAST('pop' AS varchar(max))
    FROM
        Calc
    WHERE
        Calc.pop_count > 0
    UNION ALL
    SELECT
        Calc.id
      , Calc.c + 1
      , Calc.i + 1
      , Calc.pop_count
      , CAST(NextVal.val AS varchar(max))
      , s0
      , s1
      , coalesce(s2, '') + ' ' + stack
      , cast('read' as varchar(max))
    FROM
        Calc
          INNER JOIN Scanner NextVal ON Calc.id = NextVal.id
                                          AND Calc.i + 1 = NextVal.i
    WHERE
        NextVal.val IS NOT NULL
          AND Calc.pop_count = 0
          AND (
            (Calc.s0 IS NULL or calc.s1 is null or calc.s2 is null)
            OR
            NOT(
              ISNUMERIC(Calc.s2) = 1
                AND Calc.s1 IN (SELECT op FROM Operator)
                AND ISNUMERIC(calc.s0) = 1
                AND (SELECT priority FROM Operator WHERE op = Calc.s1)
                  >= COALESCE((SELECT priority FROM Operator WHERE op = NextVal.val), 0)
            )
              AND NOT(s2 = '(' AND ISNUMERIC(s1) = 1 AND s0 = ')')
          )
  )
SELECT
    Calc.id
  , Input.str
  , Calc.s0 AS result
FROM
    Calc
      INNER JOIN Input ON Calc.id = Input.id
WHERE
    Calc.c = (SELECT MAX(c) FROM Calc calc2
              WHERE Calc.id = Calc2.id)
ORDER BY
    id

It is not shortest. But I think that it is very flexible for SQL. It's easy to add new operators. It's easy to change priority of operators.

thr

F#

Number of characters: 327

OP was looking for an F# version, here it is. Can be done a lot nicer since I'm abusing a ref here to save characters. It handles most things such as -(1.0), 3 - -3 and even 0 - .5 etc.

let g s=
 let c=ref[for x in System.Text.RegularExpressions.Regex.Matches(s,"[0-9.]+|[^\s]")->x.Value]
 let rec e v=if (!c).IsEmpty then v else 
  let h=(!c).Head
  c:=(!c).Tail
  match h with|"("->e(e 0.0)|")"->v|"+"->e(v+(e 0.0))|"-"->e(v-(e 0.0))|"/"->e(v/(e 0.0))|"*"->e(v*(e 0.0))|x->float x
 e(e 0.0)
ephemient

J

Number of characters: 208

After Jeff Moser's comment, I realized that I had completely forgotten about this language... I'm no expert, but my first attempt went rather well.

e=:>@{:@f@;:
f=:''&(4 :0)
'y x'=.x g y
while.($y)*-.')'={.>{.y do.'y x'=.(x,>(-.'/'={.>{.y){('%';y))g}.y end.y;x
)
g=:4 :0
z=.>{.y
if.z='('do.'y z'=.f}.y else.if.z='-'do.z=.'_',>{.}.y end.end.(}.y);":".x,z
)

It's a bit annoying, having to map x/y and -z into J's x%y and _z. Without that, maybe 50% of this code could disappear.

krubo

Python (without importing anything)

Number of characters: 222

I stole many tricks from Dave's answer, but I managed to shave off some more characters.

def e(s,l=0,n=0,f='+'):
 if s:l=[c for c in s+')'if' '!=c]
 while f!=')':
  p=l.pop;m=p(0)
  if m=='(':m=e(0,l)
  while l[0]not in'+-*/)':m+=p(0)
  m=float(m);n={'+':n+m,'-':n-m,'*':n*m,'/':n/(m or 1)}[f];f=p(0)
 return n

Commented version:

def evaluate(stringexpr, listexpr=0, n=0, f_operation='+'):
    # start out as taking 0 + the expression... (or could use 1 * ;)

    # We'll prefer to keep the expression as a list of characters,
    # so we can use .pop(0) to eat up the expression as we go.
    if stringexpr:
        listexpr = [c for c in stringexpr+')' if c!=' ']

    # use ')' as sentinel to return the answer
    while f_operation != ')':
        m_next = listexpr.pop(0)
        if m_next == '(':
            # lists are passed by reference, so this call will eat the (parexp)
            m_next = evaluate(None, listexpr)

        else:
            # rebuild any upcoming numeric chars into a string
            while listexpr[0] not in '+-*/)':
                m_next += listexpr.pop(0)

        # Update n as the current answer.  But never divide by 0.
        m = float(m_next)
        n = {'+':n+m, '-':n-m, '*':n*m, '/':n/(m or 1)}[f_operation]

        # prepare the next operation (known to be one of '+-*/)')
        f_operation = listexpr.pop(0)

    return n
Noldorin

C#

Number of characters: 403

So here's my solution... I'm still waiting for someone to post one in C# that can beat it. (Marc Gravell was close, and may yet do better than me after some more tinkering.)

Fully obfuscated function:

float e(string x){float v=0;if(float.TryParse(x,out v))return v;x+=';';int t=0;
char o,s='?',p='+';float n=0;int l=0;for(int i=0;i<x.Length;i++){o=s;if(
x[i]!=' '){s=x[i];if(char.IsDigit(x[i])|s=='.'|(s=='-'&o!='1'))s='1';if(s==')')
l--;if(s!=o&l==0){if(o=='1'|o==')'){n=e(x.Substring(t,i-t));if(p=='+')v+=n;
if(p=='-')v-=n;if(p=='*')v*=n;if(p=='/')v/=n;p=x[i];}t=i;if(s=='(')t++;}
if(s=='(')l++;}}return v;}

Semi-obfuscated function:

public static float Eval(string expr)
{
    float val = 0;
    if (float.TryParse(expr, out val))
        return val;
    expr += ';';
    int tokenStart = 0;
    char oldState, state = '?', op = '+';
    float num = 0;
    int level = 0;
    for (int i = 0; i < expr.Length; i++)
    {
        oldState = state;
        if (expr[i] != ' ')
        {
            state = expr[i];
            if (char.IsDigit(expr[i]) || state == '.' ||
                (state == '-' && oldState != '1'))
                state = '1';
            if (state == ')')
                level--;
            if (state != oldState && level == 0)
            {
                if (oldState == '1' || oldState == ')')
                {
                    num = Eval(expr.Substring(tokenStart, i - tokenStart));
                    if (op == '+') val += num;
                    if (op == '-') val -= num;
                    if (op == '*') val *= num;
                    if (op == '/') val /= num;
                    op = expr[i];
                }
                tokenStart = i;
                if (state == '(')
                    tokenStart++;
            }
            if (state == '(')
                level++;
        }
    }
    return val;
}

Nothing too clever going on here, it woul seem. The function does however have the advantage of being re-entrant (i.e. thread-safe).

I am also reasonably pleased with the number of chars, given that it's written in C# (valid 1.0, 2.0, and 3.0 I believe).

soulmerge

Here comes another one:

Shell script (using sed+awk)

Number of characters: 295

obfuscated:

e(){ a="$1";while echo "$a"|grep -q \(;do eval "`echo "$a"|sed 's/\(.*\)(\([^()]*\))\(.*\)/a="\1\`e \"\2\"\`\3"/'`";done; echo "$a"|sed 's/\([-+*/]\) *\(-\?\) */ \1 \2/g'|awk '{t=$1;for(i=2;i<NF;i+=2){j=$(i+1);if($i=="+") t+=j; else if($i=="-") t-=j; else if($i=="*") t*=j; else t/=j}print t}';}

readable

e () {
    a="$1"
    # Recursively process bracket-expressions
    while echo "$a"|grep -q \(; do
        eval "`echo "$a"|
            sed 's/\(.*\)(\([^()]*\))\(.*\)/a="\1\`e \"\2\"\`\3"/'`"
    done
    # Compute expression without brackets
    echo "$a"|
        sed 's/\([-+*/]\) *\(-\?\) */ \1 \2/g'|
        awk '{
            t=$1;
            for(i=2;i<NF;i+=2){
                j=$(i+1);
                if($i=="+") t+=j;
                else if($i=="-") t-=j;
                else if($i=="*") t*=j;
                else t/=j
            }
            print t
        }'
}

Test:

str='  2.45 / 8.5  *  9.27   +    (   5   *  0.0023  ) '
echo "$str"|bc -l
e "$str"

Result:

2.68344117647058823526
2.68344

MATLAB (v7.8.0)

Number of characters: 239

Obfuscated function:

function [v,s]=m(s),r=1;while s,s=regexp(s,'( ?)(?(1)-?)[\.\d]+|\S','match');c=s{end};s=[s{1:end-1}];if any(c>47),v=str2num(c);elseif c>41,[l,s]=m(s);v=[l/v l*v l+v l-v];v=v(c=='/*+-');if r,break;end;r=1;elseif c<41,break;end;r=r&c~=41;end

Clear(er) function:

function [value,str] = math(str)
  returnNow = 1;
  while str,
    str = regexp(str,'( ?)(?(1)-?)[\.\d]+|\S','match');
    current = str{end};
    str = [str{1:end-1}];
    if any(current > 47),
      value = str2num(current);
    elseif current > 41,
      [leftValue,str] = math(str);
      value = [leftValue/value leftValue*value ...
               leftValue+value leftValue-value];
      value = value(current == '/*+-');
      if returnNow,
        break;
      end;
      returnNow = 1;
    elseif current < 41,
      break;
    end;
    returnNow = returnNow & (c ~= 41);
  end

Test:

>> [math('1 + 3 / -8'); ...
math('2*3*4*5+99'); ...
math('4 * (9 - 4) / (2 * 6 - 2) + 8'); ...
math('1 + ((123 * 3 - 69) / 100)'); ...
math('2.45/8.5*9.27+(5*0.0023)')]

ans =

   -0.5000
  219.0000
   10.0000
    4.0000
    2.6834

Synopsis: A mixture of regular expressions and recursion. Pretty much the best I have been able to do so far, without cheating and using EVAL.

Robert K

Ruby

Number of characters: 170

Obfuscated:

def s(x)
while x.sub!(/\(([^\(\)]*?)\)/){s($1)}
x.gsub!('--','')
end
while x.sub!(/(-?[\d.]+)[ ]*([+\-*\/])[ ]*(-?[\d.]+)/){$1.to_f.send($2,$3.to_f)}
end
x.strip.to_f
end

Readable:

def s(x)
while x.sub!(/\(([^\(\)]*?)\)/){s($1)}
x.gsub!('--','')
end
while x.sub!(/(-?[\d.]+)[ ]*([+\-*\/])[ ]*(-?[\d.]+)/){$1.to_f.send($2,$3.to_f)}
end
x.strip.to_f
end

[
  ['1 + 3 / -8', -0.5],
  ['2*3*4*5+99', 219],
  ['4 * (9 - 4) / (2 * 6 - 2) + 8', 10],
  ['1 + ((123 * 3 - 69) / 100)', 4],
  ['2.45/8.5*9.27+(5*0.0023)',2.68344117647059],
  ['(3+7) - (5+2)', 3]
].each do |pair|
  a,b = s(String.new(pair[0])),pair[1]
  print pair[0].ljust(25), ' = ', b, ' (', a==b, ')'
  puts
end

There is no real obfuscation to this one, which I decided to post fresh since it's wildly different from my first. I should have seen this from the start. The process is a very simple process of elimination: find and resolve the highest pair of parenthesis (the most nested) into a number until no more are found, then resolve all the existing numbers and operations into the result. And, while resolving parenthetical statements I have it strip all double-dashes (Float.to_f doesn't know what to do with them).

So, it supports positive and negative numbers (+3, 3, & -3) and even negated sub-expressions within the parenthesis just by the order of processing. The only shorter implementation is the Perl (w/o eval) one.

Edit: I'm still chasing Perl, but this is the second smallest answer right now. I shrunk it with changes to the second regex and by changing the treatment of the string to be destructive (replaces the old string). This eliminated the need to duplicate the string, which I found out to just be a new pointer to the string. And renaming the function to s from solve saved a few characters.

gooli

Python with regular expressions

Number of characters: 283

Fully obfuscated function:

import re
from operator import*
def c(e):
 O=dict(zip("+-/*()",(add,sub,truediv,mul)))
 a=[add,0];s=a
 for v,o in re.findall("(-?[.\d]+)|([+-/*()])",e):
  if v:s=[float(v)]+s
  elif o=="(":s=a+s
  elif o!=")":s=[O[o]]+s
  if v or o==")":s[:3]=[s[1](s[2],s[0])]
 return s[0]

Not obfuscated:

import re
from operator import *

def compute(s):
    operators = dict(zip("+-/*()", (add, sub, truediv, mul)))
    stack = [add, 0]
    for val, op in re.findall("(-?[.\d]+)|([+-/*()])", s):
        if val:
            stack = [float(val)] + stack
        elif op == "(":
            stack = [add, 0] + stack
        elif op != ")":
            stack = [operators[op]] + stack
        if val or op == ")":
            stack[:3] = [stack[1](stack[2], stack[0])]
    return stack[0]

I wanted to see if I cab beat the other Python solutions using regular expressions.

Couldn't.

The regular expression I'm using creates a list of pairs (val, op) where only one item in each pair is valid. The rest of the code is a rather standard stack based parser with a neat trick of replacing the top 3 cells in the stack with the result of the computation using Python list assignment syntax. Making this work with negative numbers required only two additional characters (-? in the regex).

Python

Number of characters: 382

Yet another Python solution, heavily using regular expression replacement. Each run through the loop the simplest expressions are computed and the results are put back into the string.

This is the unobfuscated code, unless you consider regular expressions to be obfuscated.

import re
from operator import *    
operators = dict(zip("+-/*", (add, sub, truediv, mul)))    
def compute(s):
    def repl(m):
        v1, op, v2 = m.groups()
        return str(operators[op](float(v1), float(v2)))
    while not re.match("^\d+\.\d+$", s):
        s = re.sub("([.\d]+)\s*([+-/*])\s*([.\d]+)", repl, s)
        s = re.sub("\(([.\d]+)\)", r"\1", s)
    return s

Had this idea just as I was turning in and couldn't let it go until I wrote it down and made it work.

Marc Gravell

C#

Number of characters: 396 (updated)

(but fails the test you added with "/ -8", and I'm not inclined to fix it...

static float Eval(string s){int i,j;s=s.Trim();while((i=s.IndexOf(')'))>=0){j=s.LastIndexOf('(',i,i);s=s.Substring(0,j++)+Eval(s.Substring(j,i-j))+s.Substring(i+1);}if((i=s.LastIndexOfAny("+-*/".ToCharArray()))<0) return float.Parse(s);var r=float.Parse(s.Substring(i+1));var l=i>0?Eval(s.Substring(0,i)):(float?)null;return s[i]=='+'?(l??0)+r:(s[i]=='-'?(l??0)-r:(s[i]=='/'?(l??1)/r:(l??1)*r));}

From:

static float Eval(string s)
{
    int i, j;
    s = s.Trim();
    while ((i = s.IndexOf(')')) >= 0)
    {
        j = s.LastIndexOf('(', i, i);
        s = s.Substring(0, j++) + Eval(s.Substring(j, i - j)) + s.Substring(i + 1);
    } 
    if ((i = s.LastIndexOfAny("+-*/".ToCharArray())) < 0) return float.Parse(s);
    var r = float.Parse(s.Substring(i + 1));
    var l = i > 0 ? Eval(s.Substring(0, i)) : (float?)null;
    return s[i] == '+'
        ? (l ?? 0) + r
        : (s[i] == '-'
            ? (l ?? 0) - r
            : (s[i] == '/'
                ? (l ?? 1) / r
                : (l ?? 1) * r));
}
stephan

Python

Number of characters: 235

Fully obfuscated function:

def g(a):
 i=len(a)
 while i:
  try:m=g(a[i+1:]);n=g(a[:i]);a=str({'+':n+m,'-':n-m,'*':n*m,'/':n/(m or 1)}[a[i]])
  except:i-=1;j=a.rfind('(')+1
  if j:k=a.find(')',j);a=a[:j-1]+str(g(a[j:k]))+a[k+1:]
 return float(a.replace('--',''))

Semi-obfuscated:

def g(a):
    i=len(a);
    # do the math
    while i:
        try:
            # recursively evaluate left and right
            m=g(a[i+1:])
            n=g(a[:i])
            # try to do the math assuming that a[i] is an operator
            a=str({'+':n+m,'-':n-m,'*':n*m,'/':n/(m or 1)}[a[i]])
        except:
            # failure -> next try
            i-=1
            j=a.rfind('(')+1
        # replace brackets in parallel (this part is executed first)
        if j:
            k=a.find(')',j)
            a=a[:j-1]+str(g(a[j:k]))+a[k+1:]
    return float(a.replace('--',''))

FWIW, the n+1th Python solution. In a blatant abuse of try-except I use a trial-and-error approach. It should handle all cases properly including stuff like -(8), --8 and g('-(1 - 3)'). It is re-entrant. Without support for the -- case which many implementations don't support, it is at 217 chars (see previous revision).

Thanks for an interesting hour on a Sunday and another 30 mins on Monday. Thanks to krubo for his nice dict.

samuil

Ruby

Number of characters: 217 179

This is the shortest ruby solution up to now (one heavily based on RegExp yields incorrect answers when string contains few groups of parenthesis) -- no longer true. Solutions based on regex and substitution are shorter. This one is based on stack of accumulators and parses whole expression from left to right. It is re-entrant, and does not modify input string. It could be accused of breaking the rules of not using eval, as it calls Float's methods with identical names as their mathematical mnemonics (+,-,/,*).

Obfuscated code (old version, tweaked below):

def f(p);a,o=[0],['+']
p.sub(/-/,'+-').scan(/(?:(-?\d+(?:\.\d+)?)|(.))\s*/).each{|n|
q,w=n;case w;when'(';a<<0;o<<'+';when')';q=a.pop;else;o<<w
end if q.nil?;a[-1]=a[-1].method(o.pop).call(q.to_f) if !q.nil?};a[0];end

More obfuscated code:

def f(p);a,o=[0],[:+]
p.scan(/(?:(-?\d+(?:\.\d+)?)|(.))\s*/).each{|n|q,w=n;case w
when'(';a<<0;o<<:+;when')';q=a.pop;else;o<<w;end if !q
a<<a.pop.send(o.pop,q.to_f)if q};a[0];end

Clean code:

def f(p)
  accumulators, operands = [0], ['+']
  p.gsub(/-/,'+-').scan(/(?:(-?\d+(?:\.\d+)?)|(.))\s*/).each do |n|
    number, operand = n
    case operand
      when '('
        accumulators << 0
        operands << '+'
      when ')'
        number = accumulators.pop
        operands.pop
      else 
        operands[-1] = operand
    end if number.nil?
    accumulators[-1] = accumulators.last.method(operands[-1]).call(number.to_f) unless number.nil?
  end
  accumulators.first
end
Robert K

Ruby 1.8.7

Number of characters: 620

Do try and take it easy on my implementation, it's the first time I've written an expression parser in my life! I guarantee that it isn't the best.

Obfuscated:

def solve_expression(e)
t,r,s,c,n=e.chars.to_a,[],'','',''
while(c=t.shift)
n=t[0]
if (s+c).match(/^(-?)[.\d]+$/) || (!n.nil? && n.match(/\d/) && c=='-')
s+=c
elsif (c=='-' && n=='(') || c=='('
m,o,x=c=='-',1,''
while(c=t.shift)
o+=1 if c=='('
o-=1 if c==')'
x+=c unless c==')' && o==0
break if o==0
end
r.push(m ? -solve_expression(x) : solve_expression(x))
s=''
elsif c.match(/[+\-\/*]/)
r.push(c) and s=''
else
r.push(s) if !s.empty?
s=''
end
end
r.push(s) unless s.empty?
i=1
a=r[0].to_f
while i<r.count
b,c=r[i..i+1]
c=c.to_f
case b
when '+': a=a+c
when '-': a=a-c
when '*': a=a*c
when '/': a=a/c
end
i+=2
end
a
end

Readable:

def solve_expression(expr)
  chars = expr.chars.to_a # characters of the expression
  parts = [] # resulting parts
  s,c,n = '','','' # current string, character, next character

  while(c = chars.shift)
    n = chars[0]
    if (s + c).match(/^(-?)[.\d]+$/) || (!n.nil? && n.match(/\d/) && c == '-') # only concatenate when it is part of a valid number
      s += c
    elsif (c == '-' && n == '(') || c == '(' # begin a sub-expression
      negate = c == '-'
      open = 1
      subExpr = ''
      while(c = chars.shift)
        open += 1 if c == '('
        open -= 1 if c == ')'
        # if the number of open parenthesis equals 0, we've run to the end of the
        # expression.  Make a new expression with the new string, and add it to the
        # stack.
        subExpr += c unless c == ')' && open == 0
        break if open == 0
      end
      parts.push(negate ? -solve_expression(subExpr) : solve_expression(subExpr))
      s = ''
    elsif c.match(/[+\-\/*]/)
      parts.push(c) and s = ''
    else
      parts.push(s) if !s.empty?
      s = ''
    end
  end
  parts.push(s) unless s.empty? # expression exits 1 character too soon.

  # now for some solutions!
  i = 1
  a = parts[0].to_f # left-most value is will become the result
  while i < parts.count
    b,c = parts[i..i+1]
    c = c.to_f
    case b
      when '+': a = a + c
      when '-': a = a - c
      when '*': a = a * c
      when '/': a = a / c
    end
    i += 2
  end
  a
end
Daniel Huckstep

Ruby 1.9

(because of the regex)

Number of characters: 296

def d(s)
  while m = s.match(/((?<pg>\((?:\\[()]|[^()]|\g<pg>)*\)))/)
    s.sub!(m[:pg], d(m[:pg][1,m[:pg].size-2]))
  end
  while m = s.match(/(-?\d+(\.\d+)?)\s*([*+\-\/])\s*(-?\d+(\.\d+)?)/)
    r=m[1].to_f.send(m[3],m[4].to_f) if %w{+ - * /}.include?m[3]
    s.sub!(m[0], r.to_s)
  end
  s
end

EDIT: Includes Martin's optimization.

finnw

SNOBOL4

Number of characters: 232

        a = pos(0) | '('
        n = span('0123456789.')
        j = '!+;!-;!*;!/;       output = e'
d       j '!' len(1) . y = "    e a . q n . l '" y "' n . r = q (l " y " r)     :s(p)"  :s(d)
        k = code(j)
        e = input
s       e ' ' = :s(s)
p       e ('(' n . i ')') = i   :s(p)f<k>
end

This is a semi-cheat. It uses code() (a variant of eval) to de-compress itself, but not to evaluate the input expression.

De-obfuscated version, without code:

        prefix = pos(0) | '('
        num = span('0123456789.')
        expr = input
spaces  expr ' ' = ''   :s(spaces)
paren   expr ('(' num . x ')') = x      :s(paren)
add     expr (prefix . pfx) (num . l) '+' (num . r) = pfx (l + r)       :s(paren)
sub     expr (prefix . pfx) (num . l) '-' (num . r) = pfx (l - r)       :s(paren)
mul     expr (prefix . pfx) (num . l) '*' (num . r) = pfx (l * r)       :s(paren)
div     expr (prefix . pfx) (num . l) '/' (num . r) = pfx (l / r)       :s(paren)
        output = expr
end

Strategy:

  • First, remove all spaces (spaces)
  • Whenever possible, remove parentheses surrounding a number (paren)
  • Otherwise, find a simple expression involving two numbers, prefixed by '(' or at the start of the string
  • If none of the above rules apply, the expression is fully evaluated. Now if the input was well formed we should be left with a number.

Example:

  • 1 + (2 * 3) + 4
  • 1+(2*3)+4 [spaces]
  • 1+(6)+4 [mul]
  • 1+6+4 [paren]
  • 7+4 [add]
  • 11 [add]
Crispy

C#

Number of Characters: 355

I took Noldorin's Answer and modified it, so give Noldorin 99% of the credit for this. Best I could do with the algorithm was using was 408 characters. See Noldorin's Answer for the clearer code version.

Changes made:
Change char comparisons to compare against numbers.
Removed some default declarations and combined same type of declarations.
Re-worked some of the if statments.

float q(string x){float v,n;if(!float.TryParse(x,out v)){x+=';';int t=0,l=0,i=0;char o,s='?',p='+';for(;i<x.Length;i++){o=s;if(x[i]!=32){s=x[i];if(char.IsDigit(x[i])|s==46|(s==45&o!=49))s='1';if(s==41)l--;if(s!=o&l==0){if(o==49|o==41){n=q(x.Substring(t,i-t));v=p==43?v+n:p==45?v-n:p==42?v*n:p==47?v/n:v;p=x[i];}t=i;if(s==40)t++;}if(s==40)l++;}}}return v;}

Edit: knocked it down some more, from 361 to 355, by removing one of the return statments.

标签
math
parsing
code-golf
text-parsing
infix-notation
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!