How can memory_order_relaxed work for incrementing atomic reference counts in smart pointers?

我是研究僧i 提交于 2019-12-04 08:30:49

问题


Consider the following code snippet taken from Herb Sutter's talk on atomics:

The smart_ptr class contains a pimpl object called control_block_ptr containing the reference count refs.

// Thread A:
// smart_ptr copy ctor
smart_ptr(const smart_ptr& other) {
  ...
  control_block_ptr = other->control_block_ptr;
  control_block_ptr->refs.fetch_add(1, memory_order_relaxed);
  ...
}

// Thread D:
// smart_ptr destructor
~smart_ptr() {
  if (control_block_ptr->refs.fetch_sub(1, memory_order_acq_rel) == 0) {
    delete control_block_ptr;
  }
}

Herb Sutter says the increment of refs in Thread A can use memory_order_relaxed because "nobody does anything based on the action". Now as I understand memory_order_relaxed, if refs equals N at some point and two threads A and B execute the following code:

control_block_ptr->refs.fetch_add(1, memory_order_relaxed);

then it may happen that both threads see the value of refs to be N and both write N+1 back to it. That will clearly not work and memory_order_acq_rel should be used just as with the destructor. Where am I going wrong?

EDIT1: Consider the following code.

atomic_int refs = N; // at time t0. 

// [Thread 1]
refs.fetch_add(1, memory_order_relaxed); // at time t1. 

// [Thread 2]
n = refs.load(memory_order_relaxed);   // starting at time t2 > t1
refs.fetch_add(1, memory_order_relaxed);
n = refs.load(memory_order_relaxed);

What is the value of refs observed by Thread 2 before the call to fetch_add? Could it be either N or N+1? What is the value of refs observed by Thread 2 after the call to fetch_add? Must it be at least N+2?

[Talk URL: C++ & Beyond 2012 - http://channel9.msdn.com/Shows/Going+Deep/Cpp-and-Beyond-2012-Herb-Sutter-atomic-Weapons-2-of-2 (@ 1:20:00)]


回答1:


Boost.Atomic library that emulates std::atomic provides similar reference counting example and explanation, and it may help your understanding.

Increasing the reference counter can always be done with memory_order_relaxed: New references to an object can only be formed from an existing reference, and passing an existing reference from one thread to another must already provide any required synchronization.

It is important to enforce any possible access to the object in one thread (through an existing reference) to happen before deleting the object in a different thread. This is achieved by a "release" operation after dropping a reference (any access to the object through this reference must obviously happened before), and an "acquire" operation before deleting the object.

It would be possible to use memory_order_acq_rel for the fetch_sub operation, but this results in unneeded "acquire" operations when the reference counter does not yet reach zero and may impose a performance penalty.




回答2:


From C++ reference on std::memory_order:

memory_order_relaxed: Relaxed operation: there are no synchronization or ordering constraints imposed on other reads or writes, only this operation's atomicity is guaranteed

There is also an example below on that page.

So basically, std::atomic::fetch_add() is still atomic, even when with std::memory_order_relaxed, therefore concurrent refs.fetch_add(1, std::memory_order_relaxed) from 2 different threads will always increment refs by 2. The point of the memory order is how other non-atomic or std::memory_order_relaxed atomic operations can be reordered around the current atomic operation with memory order specified.




回答3:


As this is rather confusing (at least to me) I'm going to partially address one point:

(...) then it may happen that both threads see the value of refs to be N and both write N+1 back to it (...)

According to @AnthonyWilliams in this answer, the above sentence seems to be wrong as:

The only way to guarantee you have the "latest" value is to use a read-modify-write operation such as exchange(), compare_exchange_strong() or fetch_add(). Read-modify-write operations have an additional constraint that they always operate on the "latest" value, so a sequence of ai.fetch_add(1) operations by a series of threads will return a sequence of values with no duplicates or gaps. In the absence of additional constraints, there's still no guarantee which threads will see which values though.

So, given the authority argument, I'd say it's impossible that both threads see the value going from N to N+1.



来源:https://stackoverflow.com/questions/27631173/how-can-memory-order-relaxed-work-for-incrementing-atomic-reference-counts-in-sm

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!