ACR122u card-emulation mode send PN532 commands

问题

I just read this answer about how to put my ACR122U in card-emulation mode. I do understand the purpose but how do you need to send the commands to the ACR122u.

As far as I know FF000000 means:

• FF [Class]
• 00 [INS]
• 00 [P1]
• 00 [P2]

I just can't figure out how I can send the actual PN532 command for example:

• FF000000 08 D406 6305 630D 6338
• FF000000 11 D408 6302 80 6303 80 6305 xx 630D yy 6338 zz

I have come this far:

    TerminalFactory factory = TerminalFactory.getDefault();
    List<CardTerminal> terminals;

    try {
            terminals = factory.terminals().list();

            CardTerminal terminal   = terminals.get(0);
            Card card               = terminal.connect("*");
            CardChannel channel     = card.getBasicChannel();
            byte[] command          = {???};
            CommandAPDU command1    = new CommandAPDU(0xFF,0x00,0x00,0x00, command);
            ResponseAPDU response1  = channel.transmit(command1);
            System.out.println(bytesToHex(response1.getBytes()));

    } catch (CardException e) {
        // TODO Auto-generated catch block
        e.printStackTrace();
    }

I appreciate your help!

Many thanks in advance!!

回答1:

Assuming 08 D406 6305 630D 6338 means

• 08 [Lc]
• D406 6305 630D 6338 [data]

It would look like this:

byte[] command = new byte[8] { (byte) 0xD4, 0x06, 0x63, 0x05, 0x63, 0x0D, 0x63, 0x38 };

You can leave out the the 8 since javac will count the bytes for you.

来源：https://stackoverflow.com/questions/24726444/acr122u-card-emulation-mode-send-pn532-commands