1. 技术文章
  2. nvm keeps “forgetting” node in new terminal session

nvm keeps “forgetting” node in new terminal session

由 牧云@^-^@ 提交于 2019-11-26 19:11:09

Try nvm alias default. For example:

$ nvm alias default 0.12.7

This sets the default node version in your shell. Then verify that the change persists by closing the shell window, opening a new one, then: node --version

Alias to node itself to avoid updating the default alias along with node version updates later on.

nvm alias default node

To install the latest stable version:

nvm install stable

To set default to the stable version (instead of a specific version):

nvm alias default stable

To list installed versions:

nvm list

As of v6.2.0, it will look something like:

$ nvm list
         v4.4.2
->       v6.2.0
default -> stable (-> v6.2.0)
node -> stable (-> v6.2.0) (default)
stable -> 6.2 (-> v6.2.0) (default)
iojs -> N/A (default)

nvm does its job by changing the PATH variable, so you need to make sure you aren't somehow changing your PATH to something else after sourcing the nvm.sh script.

In my case, nvm.sh was being called in .bashrc but then the PATH variable was getting updated in .bash_profile which caused my session to find the system node before the nvm node.

In my case, another program had added PATH changes to .bashrc

If the other program changed the PATH after nvm's initialisation, then nvm's PATH changes would be forgotten, and we would get the system node on our PATH (or no node).

The solution was to move the nvm setup to the bottom of .bashrc

### BAD .bashrc ###

# NVM initialisation
export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm

# Some other program adding to the PATH:
export PATH="$ANT_ROOT:$PATH"

Solution:

### GOOD .bashrc ###

# Some other program adding to the PATH:
export PATH="$ANT_ROOT:$PATH"

# NVM initialisation
export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm

(This was with bash 4.2.46 on CentOS. It seems to me like a bug in bash, but I may be mistaken.)

The top rated solutions didn't seem to work for me. My solution is below:

  1. Uninstall nvm completely using homebrew:brew uninstall nvm
  2. Reinstall brew install nvm

  3. In Terminal, follow the steps below(these are also listed when installing nvm via homebrew):

    mkdir ~/.nvm cp $(brew --prefix nvm)/nvm-exec ~/.nvm/ export NVM_DIR=~/.nvm source $(brew --prefix nvm)/nvm.sh

The steps outlined above will add NVM's working directory to your $HOME path, copy nvm-exec to NVM's working directory and add to $HOME/.bashrc, $HOME/.zshrc, or your shell's equivalent configuration file.(again taken from whats listed on an NVM install using homebrew)

If you have tried everything still no luck you can try this :_

1 -> Uninstall NVM

rm -rf ~/.nvm

2 -> Remove npm dependencies by following this

3 -> Install NVM

curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.33.11/install.sh | bash

4 -> Set ~/.bash_profile configuration

Run sudo nano ~/.bash_profile

Copy and paste following this

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

5 -> CONTROL + X save the changes

6 -> Run . ~/.bash_profile

7 -> Now you should have nvm installed on your machine, to install node run nvm install v7.8.0 this will be default node version or you can install any version of node

souparno majumder

This question has mentioned for the OSX, but it happened to me in my linux OS. I tried using nvm alias default <version> but for each new terminal session the used node version was forgotten. so, here is the solution that i figured out.

make sure to set a default alias for node version,put the following code in .bashrc, and source .bashrc.

export NVM_DIR="/home/bonnie/.nvm"
## If the file exists and is not empty
if [ -s "$NVM_DIR/nvm.sh" ]; then
    ## Source it
    source "$NVM_DIR/nvm.sh"
fi
NODE_DEFAULT_VERSION=$(<"$NVM_DIR/alias/default")
export PATH="$NVM_DIR/versions/node/$NODE_DEFAULT_VERSION/bin":$PATH

descriptive solution link

run this after you installed any version,

n=$(which node);n=${n%/bin/node}; chmod -R 755 $n/bin/*; sudo cp -r $n/{bin,lib,share} /usr/local

This command is copying whatever version of node you have active via nvm into the /usr/local/ directory and setting the permissions so that all users can access them.

I have found a new way here. Using n Interactively Manage Your Node.js helps.

Doing nvm install 10.14, for example, will nvm use that version for the current shell session but it will not always set it as the default for future sessions as you would expect. The node version you get in a new shell session is determined by nvm alias default. Confusingly, nvm install will only set the default alias if it is not already set. To get the expected behaviour, do this:

nvm alias default ''; nvm install 10.14

This will ensure that that version is downloaded, use it for the current session and set it as the default for future sessions.

If you also have SDKMAN...

Somehow SDKMAN was conflicting with my NVM. If you're at your wits end with this and still can't figure it out, I just fixed it by ignoring the "THIS MUST BE AT THE END OF THE FILE..." from SDKMAN and putting the NVM lines after it.

#THIS MUST BE AT THE END OF THE FILE FOR SDKMAN TO WORK!!!
export SDKMAN_DIR="/Users/myname/.sdkman"
[[ -s "/Users/myname/.sdkman/bin/sdkman-init.sh" ]] && source "/Users/myname/.sdkman/bin/sdkman-init.sh"

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

After a long time of conflicting with this issue, I found how to fix it. Here is a step by step solution for the problem:

  • Open terminal & Install the command line developer tools:

    xcode-select --install

  • Press enter

  • Install the latest version of NVM:

    cd ~/

  • Press enter

    git clone https://github.com/creationix/nvm.git .nvm

  • Press enter

  • In case you already created the .nvm folder before, you'll see the next error message:

    fatal: destination path '.nvm' already exists and is not an empty directory.

    Else, you'll see the cloning process running until it has done.

  • Check out the latest NVM version:

    cd ~/.nvm

  • Press enter

    git checkout v0.34.0

    You'll get a response similar to:

    HEAD is now at 3d9c31d v0.34.0

    The version might be different on different systems.

    ls

  • Press enter

    . nvm.sh

  • Press enter

    nvm list

  • Press enter

    You'll see the different node versions installed on your machine, there might be some errors, don't give them attention.

    nvm ls-remote | tail -n9

  • Press enter

    nvm list

  • Open bash using vim:

    vim ~/.bash_profile

  • Inside the vim editor press: i to enter INSERT mode and start a new line. If you have any mistakes when editing, press ESC key and then :q! to exit without saving.

    export NVM_DIR="$HOME/.nvm" [ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm [ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion

  • Press ESC key when you finish editing the file (you'll see the INSERT mode disappears).

  • Press :wq to save the file.

  • Press enter

    nvm ls-remote | tail -n9

  • Press enter and install the newest nvm version presented:

    nvm install 12.6.0

  • When the process finished you'll see: Now using node v12.6.0 (npm v6.9.0)

  • You can check if installation succeeds by pressing:

    node -v or npm -v, it should show you the versions of both nvm and npm installed on your system.

Based on: How to Install Latest Node Version Manager NVM and Install Node and NPM in macOS Mac OS X

Also in case you had node installed before nvm check in your ~/.bash_profile to not have something like :

export PATH=/bin:/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:$PATH

If you do have it, comment/remove it and nvm should start handling the default node version.

标签
node.js
macos
npm
homebrew
nvm
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!