Strange output when I use float
instead of double
#include <stdio.h>
void main()
{
double p,p1,cost,cost1=30;
for (p = 0.1; p < 10;p=p+0.1)
{
cost = 30-6*p+p*p;
if (cost<cost1)
{
cost1=cost;
p1=p;
}
else
{
break;
}
printf("%lf\t%lf\n",p,cost);
}
printf("%lf\t%lf\n",p1,cost1);
}
Gives output as expected at p
= 3;
But when I use float
the output is a little weird.
#include <stdio.h>
void main()
{
float p,p1,cost,cost1=40;
for (p = 0.1; p < 10;p=p+0.1)
{
cost = 30-6*p+p*p;
if (cost<cost1)
{
cost1=cost;
p1=p;
}
else
{
break;
}
printf("%f\t%f\n",p,cost);
}
printf("%f\t%f\n",p1,cost1);
}
Why is the increment of p
in the second case going weird after 2.7?
This is happening because the float
and double
data types store numbers in base 2. Most base-10 numbers can’t be stored exactly. Rounding errors add up much more quickly when using float
s. Outside of embedded applications with limited memory, it’s generally better, or at least easier, to use double
s for this reason.
To see this happening for double
types, consider the output of this code:
#include <stdio.h>
int main(void)
{
double d = 0.0;
for (int i = 0; i < 100000000; i++)
d += 0.1;
printf("%f\n", d);
return 0;
}
On my computer, it outputs 9999999.981129. So after 100 million iterations, rounding error made a difference of 0.018871 in the result.
For more information about how floating-point data types work, read What Every Computer Scientist Should Know About Floating-Point Arithmetic. Or, as akira mentioned in a comment, see the Floating-Point Guide.
Your program can work fine with float
. You don't need double
to compute a table of 100 values to a few significant digits. You can use double
, and if you do, it will have chances to work even if you use binary floating-point binary at cross-purposes. The IEEE 754 double-precision format used for double
by most C compilers is so precise that it makes many misuses of floating-point unnoticeable (but not all of them).
Values that are simple in decimal may not be simple in binary
A consequence is that a value that is simple in decimal may not be represented exactly in binary.
This is the case for 0.1: it is not simple in binary, and it is not represented exactly as either double
or float
, but the double
representation has more digits and as a result, is closer to the intended value 1/10.
Floating-point operations are not exact in general
Binary floating-point operations in a format such as float
or double
have to produce a result in the intended format. This leads to some digits having to be dropped from the result each time an operation is computed. When using binary floating-point in an advanced manner, the programmer sometimes knows that the result will have few enough digits for all the digits to be represented in the format (in other words, sometimes a floating-point operation can be exact and advanced programmers can predict and take advantage of conditions in which this happens). But here, you are adding 0.1
, which is not simple and (in binary) uses all the available digits, so most of the times, this addition is not be exact.
How to print a small table of values using only float
In for (p = 0.1; p < 10;p=p+0.1)
, the value of p
, being a float
, will be rounded at each iteration. Each iteration will be computed from a previous iteration that was already rounded, so the rounding errors will accumulate and make the end result drift away from the intended, mathematical value.
Here is a list of improvements over what you wrote, in reverse order of exactness:
for (i = 1, p = 0.1f; i < 100; i++, p = i * 0.1f)
In the above version, 0.1f is not exactly 1/10, but the computation of p
involves only one multiplication and one rounding, instead of up to 100. That version gives a more precise approximation of i/10.
for (i = 1, p = 0.1f; i < 100; i++, p = i * 0.1)
In the very slightly different version above, i
is multiplied by the double
value 0.1
, which more closely approximates 1/10. The result is always the closest float
to i/10, but this solution is cheating a bit, since it uses a double
multiplication. I said a solution existed with only float
!
for (i = 1, p = 0.1f; i < 100; i++, p = i / 10.0f)
In this last solution, p
is computed as the division of i
, represented exactly as a float
because it is a small integer, by 10.0f
, which is also exact for the same reason. The only computation approximation is that of a single operation, and the arguments are exactly what we wanted them to, so this is the best solution. It produces the closest float
to i/10 for all values of i between 1 and 99.
来源:https://stackoverflow.com/questions/28512650/strange-output-when-using-float-instead-of-double