Problem with compiling RInside examples under Windows

问题

I am trying to setup RInside at work where we are forced to use a Windows environment.

I have installed RTools and downloaded an RInside binary from CRAN.

My R installation resides in c:\R\R-2.12.2 so no problems with folders with spaces.

I have installed the Rcpp and RInside packages in R.

I execute the following makefile Makefile.win included in the downloaded RInside binary

## -*- mode: makefile; tab-width: 8; -*-
##
## Simple Makefile
##
## TODO:
##  proper configure for non-Debian file locations,   [ Done ]
##  allow RHOME to be set for non-default R etc

## comment this out if you need a different version of R,
## and set set R_HOME accordingly as an environment variable
R_HOME :=       'cygdrive/c/R/R-2.12.2'

sources :=      $(wildcard *.cpp)
programs :=         $(sources:.cpp=)

## include headers and libraries for R
RCPPFLAGS :=        $(shell $(R_HOME)/bin/R CMD config --cppflags)
RLDFLAGS :=         $(shell $(R_HOME)/bin/R CMD config --ldflags)
RBLAS :=        $(shell $(R_HOME)/bin/R CMD config BLAS_LIBS)
RLAPACK :=      $(shell $(R_HOME)/bin/R CMD config LAPACK_LIBS)

## include headers and libraries for Rcpp interface classes
RCPPINCL :=         $(shell echo 'Rcpp:::CxxFlags()' | $(R_HOME)/bin/R --vanilla --    slave)
RCPPLIBS :=         $(shell echo 'Rcpp:::LdFlags()'  | $(R_HOME)/bin/R --vanilla --slave)

## include headers and libraries for RInside embedding classes
RINSIDEINCL :=      $(shell echo 'RInside:::CxxFlags()' | $(R_HOME)/bin/R --vanilla --slave)
RINSIDELIBS :=      $(shell echo 'RInside:::LdFlags()'  | $(R_HOME)/bin/R --vanilla --slave)

## compiler etc settings used in default make rules
CXX :=          $(shell $(R_HOME)/bin/R CMD config CXX)
CPPFLAGS :=         -Wall $(shell $(R_HOME)/bin/R CMD config CPPFLAGS)
CXXFLAGS :=         $(RCPPFLAGS) $(RCPPINCL) $(RINSIDEINCL) $(shell     $(R_HOME)/bin/R     CMD config CXXFLAGS)
LDFLAGS =       -s
LDLIBS :=       $(RLDFLAGS) $(RBLAS) $(RLAPACK) $(RINSIDELIBS) $(RCPPLIBS) 
CC :=           $(shell $(R_HOME)/bin/R CMD config CXX)

all :           $(programs)

clean:
        rm -vf $(programs)

with the command

make -f Makefile.win

to try an build the standard examples included

However, I get the following error:

C:\RInside_0.2.3\RInside\examples\standard>make -f Makefile.win
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
cygdrive/c/R/R-2.12.2/bin/R: not found
cygdrive/c/R/R-2.12.2/bin/R: not found
cygdrive/c/R/R-2.12.2/bin/R: not found
cygdrive/c/R/R-2.12.2/bin/R: not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
make: cygdrive/c/R/R-2.12.2/bin/R: Command not found
Wall  -s  rinside_callbacks0.cpp        -o rinside_callbacks0
make: Wall: Command not found
make: [rinside_callbacks0] Error 127 (ignored)
Wall  -s  rinside_module_sample0.cpp        -o rinside_module_sample0
make: Wall: Command not found
make: [rinside_module_sample0] Error 127 (ignored)
Wall  -s  rinside_sample0.cpp        -o rinside_sample0
make: Wall: Command not found
make: [rinside_sample0] Error 127 (ignored)
Wall  -s  rinside_sample1.cpp        -o rinside_sample1
make: Wall: Command not found
make: [rinside_sample1] Error 127 (ignored)
Wall  -s  rinside_sample2.cpp        -o rinside_sample2
make: Wall: Command not found
make: [rinside_sample2] Error 127 (ignored)
Wall  -s  rinside_sample3.cpp        -o rinside_sample3
make: Wall: Command not found
make: [rinside_sample3] Error 127 (ignored)
Wall  -s  rinside_sample4.cpp        -o rinside_sample4
make: Wall: Command not found
make: [rinside_sample4] Error 127 (ignored)
Wall  -s  rinside_sample5.cpp        -o rinside_sample5
make: Wall: Command not found
make: [rinside_sample5] Error 127 (ignored)
Wall  -s  rinside_sample6.cpp        -o rinside_sample6
make: Wall: Command not found
make: [rinside_sample6] Error 127 (ignored)
Wall  -s  rinside_sample7.cpp        -o rinside_sample7
make: Wall: Command not found
make: [rinside_sample7] Error 127 (ignored)
Wall  -s  rinside_sample8.cpp        -o rinside_sample8
make: Wall: Command not found
make: [rinside_sample8] Error 127 (ignored)
Wall  -s  rinside_sample9.cpp        -o rinside_sample9
make: Wall: Command not found
make: [rinside_sample9] Error 127 (ignored)
Wall  -s  rinside_test0.cpp        -o rinside_test0
make: Wall: Command not found
make: [rinside_test0] Error 127 (ignored)
Wall  -s  rinside_test1.cpp        -o rinside_test1
make: Wall: Command not found
make: [rinside_test1] Error 127 (ignored)

I have tried with different paths for R_HOME but I question my ability to having found the right one. I am new to makefiles, so the error output is not of much help.

Hope somebody has some valuable insight to share!

Thanks in advance,

Christian

回答1:

I have a similar setup at work, so I gave this a shot. I'm able to build the examples after I specify R_LIBS_SITE. Note that it must be a Windows path, not a Cygwin path!

export R_LIBS_SITE=c:/R/site-library

回答2:

You seem to have two distinct problems here:

Your $PATH is probably off, or as Josh had hinted, your $R_HOME assignment is wrong. If make is indeed the binary from Rtools, and the paths you assign are correct, then the builds succeed. That is the general rule for building R packages on Windows: Follow the manual very diligently and it will work.
RInside is broken on Windows, sorry. It will build, and you will get segfaults. Romain and I clearly state so in the documentation.

As Romain and I work almost exclusively on OS X and Linux, respectively, we would appreciate debugging help. It should be doable, but it probably requires some serious willingness to learn about R internals as something in the memory subsystem goes belly-up. Which it clearly does not on OSs with an X in their name.

Updated on 08 Dec 2011: RInside 0.2.5, on CRAN as of today, restores the Windows functionality--using the fix James notes in the other comment.

回答3:

I spent a little time today looking at the bug with the windows version of RInside. I believe that I have discovered the bug which is as follows:

In RInside::initialize(……) the structRStart structure is populated however this now requires extra fields to be populated in the case of windows as shown in Rf_initEmbeddedR() from R\src\gnuwin32\embedded.c.

Rp->rhome = RHome;
Rp->home = getRUser();
Rp->CharacterMode = LinkDLL;
Rp->ReadConsole = myReadConsole;
Rp->WriteConsole = myWriteConsole;
Rp->CallBack = myCallBack;
Rp->ShowMessage = askok;
Rp->YesNoCancel = askyesnocancel;
Rp->Busy = myBusy;

Equivalent assignments will be necessary in RInside.cpp in order to provide valid callbacks.

来源：https://stackoverflow.com/questions/5650063/problem-with-compiling-rinside-examples-under-windows

标签

c++

makefile

rinside