Is s3fs not able to mount inside docker container?

问题

I want to mount s3fs inside of docker container.

I made docker image with s3fs, and did like this:

host$ docker run -it --rm docker/s3fs bash
[ root@container:~ ]$ s3fs s3bucket /mnt/s3bucket -o allow_other -o allow_other,default_acl=public-read -ouse_cache=/tmp
fuse: failed to open /dev/fuse: Operation not permitted

Showing "Operation not permitted" error.

So I googled, and did like this (adding --privileged=true) again:

host$ docker run -it --rm --privileged=true docker/s3fs bash
[ root@container:~ ]$ s3fs s3bucket /mnt/s3bucket -o allow_other -o allow_other,default_acl=public-read -ouse_cache=/tmp
[ root@container:~ ]$ ls /mnt/s3bucket
ls: cannot access /mnt/s3bucket: Transport endpoint is not connected
[ root@container:~ ]$ fusermount -u /mnt/s3bucket
[ root@container:~ ]$ s3fs s3bucket /mnt/s3bucket -o allow_other -o allow_other,default_acl=public-read -ouse_cache=/tmp
[ root@container:~ ]$ ls /mnt/s3bucket
ls: cannot access /mnt/s3bucket: Transport endpoint is not connected

Then, mounting not shows error, but if run ls command, "Transport endpoint is not connected" error is occured.

How can I mount s3fs inside of docker container? Is it impossible?

[UPDATED]

Add Dockerfile configuration.

Dockerfile:

FROM dockerfile/ubuntu

RUN apt-get update
RUN apt-get install -y build-essential
RUN apt-get install -y libfuse-dev
RUN apt-get install -y fuse
RUN apt-get install -y libcurl4-openssl-dev
RUN apt-get install -y libxml2-dev
RUN apt-get install -y mime-support

RUN \
  cd /usr/src && \
  wget http://s3fs.googlecode.com/files/s3fs-1.74.tar.gz && \
  tar xvzf s3fs-1.74.tar.gz && \
  cd s3fs-1.74/ && \
  ./configure --prefix=/usr && \
  make && make install

ADD passwd/passwd-s3fs /etc/passwd-s3fs
ADD rules.d/99-fuse.rules /etc/udev/rules.d/99-fuse.rules
RUN chmod 640 /etc/passwd-s3fs

RUN mkdir /mnt/s3bucket

rules.d/99-fuse.rules:

KERNEL==fuse, MODE=0777

回答1:

I'm not sure what you did that did not work, but I was able to get this to work like this:

Dockerfile:

FROM ubuntu:12.04

RUN apt-get update -qq
RUN apt-get install -y build-essential libfuse-dev fuse-utils libcurl4-openssl-dev libxml2-dev mime-support automake libtool wget tar

RUN wget https://github.com/s3fs-fuse/s3fs-fuse/archive/v1.77.tar.gz -O /usr/src/v1.77.tar.gz
RUN tar xvz -C /usr/src -f /usr/src/v1.77.tar.gz
RUN cd /usr/src/s3fs-fuse-1.77 && ./autogen.sh && ./configure --prefix=/usr && make && make install

RUN mkdir /s3bucket

After building with:

docker build --rm -t ubuntu/s3fs:latest .

I ran the container with:

docker run -it -e AWSACCESSKEYID=obscured -e AWSSECRETACCESSKEY=obscured --privileged ubuntu/s3fs:latest bash

and then inside the container:

root@efa2689dca96:/# s3fs s3bucket /s3bucket
root@efa2689dca96:/# ls /s3bucket
testing.this.out  work.please  working
root@efa2689dca96:/#

which successfully listed the files in my s3bucket.

You do need to make sure the kernel on your host machine supports fuse, but it would seem you have already done so?

Note: Your S3 mountpoint will not show/work from inside other containers when using Docker's --volume or --volumes-from directives. For example:

docker run -t --detach --name testmount -v /s3bucket -e AWSACCESSKEYID=obscured -e AWSSECRETACCESSKEY=obscured --privileged --entrypoint /usr/bin/s3fs ubuntu/s3fs:latest -f s3bucket /s3bucket
docker run -it --volumes-from testmount --entrypoint /bin/ls ubuntu:12.04 -ahl /s3bucket
total 8.0K
drwxr-xr-x  2 root root 4.0K Aug 21 21:32 .
drwxr-xr-x 51 root root 4.0K Aug 21 21:33 ..

returns no files even though there are files in the bucket.

来源：https://stackoverflow.com/questions/24966347/is-s3fs-not-able-to-mount-inside-docker-container