Windows: How to tell printer to issue a FormFeed during printing?

问题

i need to tell a printer driver to issue a form feed.

i'm printing directly to a printer using the:

OpenPrinter
StartDocPrinter
- StartPagePrinter
- WritePrinter
- EndPagePrinter
EndDocPrinter
ClosePrinter

set of API calls.

A lot of the inspiration came from KB138594 - HOWTO: Send Raw Data to a Printer by Using the Win32 API. An important point to note in that KB article is that they (and my copied code) start the document in RAW mode:

// Fill in the structure with info about this "document."
docInfo.pDocName = "My Document";
docInfo.pOutputFile = NULL;
docInfo.pDatatype = "RAW";
StartDocPrinter(hPrinter, 1, docInfo);

Note: RAW mode (as opposed to TEXT mode) means we are issuing raw bytes to the printer driver. We promise to talk in the language it understands.

We can then use WritePrinter to write everything we want:

WritePrinter(hPrinter, "Hello, world!"); //note, extra parameters removed for clarity
WritePrinter(hPrinter, 0x0c); //form-feed

The problem here is the 0x0c form-feed character. Because we've opened the printer in RAW mode, we are promising we will send the printer driver bytes it can process. The drivers of most printers take 0x0C to mean you want to issue a form-feed.

The problem is that other printers (PDF printer, Microsoft XPS Printers) expect RAW print jobs to be in their own printer language. If you use the above to print to an XPS or PDF printer: nothing happens (i.e. no save dialog, nothing printed).

i asked for a solution to this question a while ago, and a response was that you have to change the document mode from RAW:

docInfo.pDatatype = "RAW";

to TEXT:

docInfo.pDataType = "TEXT";

Well this probably is because you send "RAW" data directly to the printer, and RAW can be any PDL. But the XPS driver will probably only understands XPS, and it will probably just ignore your "unknown: Hello, world!0xFF" PDL. The XPS driver will probably, if any, only accept XPS data when you write directly to it.

If you want to render text on the XPS driver, you should use GDI. You might be able to send plain text to the driver if you specify "TEXT" as the datatype. The print processor attached to the driver will then "convert" the plaintext for you by rendering the job via GDI to the driver.

So that worked, i changed my code to declare the print document as TEXT:

// Fill in the structure with info about this "document."
docInfo.pDocName = "My Document";
docInfo.pOutputFile = NULL;
docInfo.pDatatype = "TEXT";
StartDocPrinter(hPrinter, 1, docInfo);
WritePrinter(hPrinter, "Hello, world!");
WritePrinter(hPrinter, 0x0c); //form-feed

And then the Save As dialog for XPS and PDF printers appear, and it saves correctly. And i thought all was fixed.

Except months later, when i tried to print to a <quote>real</quote> printer: the form-feed doesn't happen - presumably because i am no longer printing in "raw printer commands" mode.

So what i need is the Windows-ish way of issuing a form feed. i need the API call that will tell printer driver that i want the printer to perform a form-feed.

My question: How to tell a printer to issue a Form-Feed during printing?

Background on Data Types

The print processor tells the spooler to alter a job according to the document data type. It works in conjunction with the printer driver to send the spooled print jobs from the hard drive to the printer.

Software vendors occasionally develop their own print processors to support custom data types. Normally, the print processor does not require any settings or intervention from administrators.

Data types

The Windows printing process normally supports five data types. The two most commonly used data types, enhanced metafile (EMF) and ready to print (RAW), affect performance in different ways on both the client computer and the print server computer.

RAW is the default data type for clients other than Windows-based programs. The RAW data type tells the spooler not to alter the print job at all prior to printing. With this data type, the entire process of preparing the print job is done on the client computer.

EMF, or enhanced metafile, is the default datatype with most Windows-based programs. With EMF, the printed document is altered into a metafile format that is more portable than RAW files and usually can be printed on any printer. EMF files tend to be smaller than RAW files that contain the same print job. Regarding performance, only the first portion of a print job is altered, or rendered on the client computer, but most of the impact is on the print server computer, which also helps the application on the client computer to return control to the user faster.

The following table (taken from MSDN) shows the five different data types supported by the default Windows print processor:

Data type: RAW
Directions to spooler: Print the document with no changes.
Use: This is the data type for all clients not based on Windows.

Data type: RAW [FF appended]
Directions to spooler: Append a form-feed character (0x0C), but make no other changes. (A PCL printer omits the document's last page if there is no trailing form-feed.)
Use: Required for some applications. Windows does not assign it, but it can be set as the default in the Print Processor dialog box.

Data type: RAW [FF auto]
Directions to spooler: Check for a trailing form-feed and add one if it is not already there, but make no other changes.
Use: Required for some applications. Windows does not assign it, but it can be set as the default in the Print Processor dialog box.

Data type: NT EMF 1.00x
Directions to spooler: Treat the document as an enhanced metafile (EMF) rather than the RAW data that the printer driver puts out.
Use: EMF documents are created by Windows.

Data type: TEXT
Directions to spooler: Treat the entire job as ANSI text and add print specifications using the print device's factory defaults. Use: This is useful when the print job is simple text and the target print device cannot interpret simple text.

You can see the print processors available for a printer, and the data types that each processor supports, through the properties of a printer in the control panel:

Windows: How to tell printer to issue a FormFeed during printing?

问题

Background on Data Types

See also

回答1:

回答2:

回答3: