boost::property_tree::json_parser and two-byte wide characters

不羁的心 提交于 2019-12-03 06:52:53

I found some solutions. In general you needs to specify boost::property_tree::json_parser::create_escapes template for [Ch=Char], to provide your "special occasion bug free escaping".

JSON standard assume that all string are UTF-16 encoded with "\uXXXX" escaping, but some library support UTF-8 encoding with "\xXX" escaping. If JSON file can be encoded in UTF-8, you may pass all character higher than 0x7F, witch was intended for original function.

I put this code before using boost::property_tree::json_parser::write_json. It comes from boost_1_49_0/boost/property_tree/detail/json_parser_write.hpp:

namespace boost { namespace property_tree { namespace json_parser
{
    // Create necessary escape sequences from illegal characters
    template<>
    std::basic_string<char> create_escapes(const std::basic_string<char> &s)
    {
        std::basic_string<char> result;
        std::basic_string<char>::const_iterator b = s.begin();
        std::basic_string<char>::const_iterator e = s.end();
        while (b != e)
        {
            // This assumes an ASCII superset. But so does everything in PTree.
            // We escape everything outside ASCII, because this code can't
            // handle high unicode characters.
            if (*b == 0x20 || *b == 0x21 || (*b >= 0x23 && *b <= 0x2E) ||
                (*b >= 0x30 && *b <= 0x5B) || (*b >= 0x5D && *b <= 0xFF)  //it fails here because char are signed
                || (*b >= -0x80 && *b < 0 ) ) // this will pass UTF-8 signed chars
                result += *b;
            else if (*b == char('\b')) result += char('\\'), result += char('b');
            else if (*b == char('\f')) result += char('\\'), result += char('f');
            else if (*b == char('\n')) result += char('\\'), result += char('n');
            else if (*b == char('\r')) result += char('\\'), result += char('r');
            else if (*b == char('/')) result += char('\\'), result += char('/');
            else if (*b == char('"'))  result += char('\\'), result += char('"');
            else if (*b == char('\\')) result += char('\\'), result += char('\\');
            else
            {
                const char *hexdigits = "0123456789ABCDEF";
                typedef make_unsigned<char>::type UCh;
                unsigned long u = (std::min)(static_cast<unsigned long>(
                                                 static_cast<UCh>(*b)),
                                             0xFFFFul);
                int d1 = u / 4096; u -= d1 * 4096;
                int d2 = u / 256; u -= d2 * 256;
                int d3 = u / 16; u -= d3 * 16;
                int d4 = u;
                result += char('\\'); result += char('u');
                result += char(hexdigits[d1]); result += char(hexdigits[d2]);
                result += char(hexdigits[d3]); result += char(hexdigits[d4]);
            }
            ++b;
        }
        return result;
    }
} } }

And the output I get:

{
    "text": "aáb"
}

Also the function boost::property_tree::json_parser::a_unicode have similar problems with reading escaped unicode characters to signed chars.

Support above Basic Multilingual Plane:

    template<class Ch>
std::basic_string<Ch> create_escapes(const std::basic_string<Ch> &s)
{
    std::basic_string<Ch> result;
    typename std::basic_string<Ch>::const_iterator b = s.begin();
    typename std::basic_string<Ch>::const_iterator e = s.end();
    while (b != e)
    {
        if (*b == 0x20 || *b == 0x21 || (*b >= 0x23 && *b <= 0x2E) ||
            (*b >= 0x30 && *b <= 0x5B) || (*b >= 0x5D && *b <= 0x80))
            result += *b;
        else if (*b == Ch('\b')) result += Ch('\\'), result += Ch('b');
        else if (*b == Ch('\f')) result += Ch('\\'), result += Ch('f');
        else if (*b == Ch('\n')) result += Ch('\\'), result += Ch('n');
        else if (*b == Ch('\r')) result += Ch('\\'), result += Ch('r');
        else if (*b == Ch('/')) result += Ch('\\'), result += Ch('/');
        else if (*b == Ch('"'))  result += Ch('\\'), result += Ch('"');
        else if (*b == Ch('\\')) result += Ch('\\'), result += Ch('\\');
        else
        {
            const char * hexdigits = "0123456789ABCDEF";

            typedef typename make_unsigned<Ch>::type UCh;
            unsigned long u = static_cast<unsigned long>(static_cast<UCh>(*b));

            if (u <= 0xFFFF)
            {            
                int d1 = u / 4096; u -= d1 * 4096;
                int d2 = u / 256; u -= d2 * 256;
                int d3 = u / 16; u -= d3 * 16;
                int d4 = u;

                result += Ch('\\'); result += Ch('u');
                result += Ch(hexdigits[d1]); result += Ch(hexdigits[d2]);
                result += Ch(hexdigits[d3]); result += Ch(hexdigits[d4]);
            }
            else
            {
                u = (((static_cast<unsigned long>(static_cast<UCh>(*b)) - 0x10000) >> 10) & 0x3ff) + 0xd800;

                int d1 = u / 4096; u -= d1 * 4096;
                int d2 = u / 256; u -= d2 * 256;
                int d3 = u / 16; u -= d3 * 16;
                int d4 = u;

                result += Ch('\\'); result += Ch('u');
                result += Ch(hexdigits[d1]); result += Ch(hexdigits[d2]);
                result += Ch(hexdigits[d3]); result += Ch(hexdigits[d4]);

                u = ((static_cast<unsigned long>(static_cast<UCh>(*b)) - 0x10000) & 0x3ff) + 0xdc00;

                d1 = u / 4096; u -= d1 * 4096;
                d2 = u / 256; u -= d2 * 256;
                d3 = u / 16; u -= d3 * 16;
                d4 = u;

                result += Ch('\\'); result += Ch('u');
                result += Ch(hexdigits[d1]); result += Ch(hexdigits[d2]);
                result += Ch(hexdigits[d3]); result += Ch(hexdigits[d4]);
            }
        }
        ++b;
    }
    return result;
}
易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!