GCC with -std=c99 complains about not knowing struct timespec

When I try to compile this on Linux with gcc -std=c99, the compiler complains about not knowing struct timespec. However if I compile this without -std=c99 everything works fine.

#include <time.h>

int main(void)
{
  struct timespec asdf;
  return 0;
}

Why is this and is there a way to still get it to work with -std=c99?

Explicitly enabling POSIX features

The timespec comes from POSIX, so you have to 'enable' POSIX definitions:

#if __STDC_VERSION__ >= 199901L
#define _XOPEN_SOURCE 600
#else
#define _XOPEN_SOURCE 500
#endif /* __STDC_VERSION__ */

#include <time.h>

void blah(struct timespec asdf)
{
}

int main()
{
    struct timespec asdf;
    return 0;
}

The stanza at the top is what I currently use - it triggers the definitions from Single UNIX Specification (SUS) based on whether you're using a C99 or C89 compiler.

If you want the POSIX 2008 (SUS v4) material, use _XOPEN_SOURCE 700
If you want the POSIX 2004 (SUS v3) material, use _XOPEN_SOURCE 600
If you want the POSIX 1995 (SUS v2, 1997) material, use _XOPEN_SOURCE 500

As noted in the comments, using _XOPEN_SOURCE strictly enables the XSI (X/Open System Interface) extensions over strict POSIX, but it is very rare for you to want POSIX and not XSI. You should normally specify _XOPEN_SOURCE and not futz with _POSIX_C_SOURCE. See (POSIX 2018) on The Compilation Environment for more information about feature macros.

For my systems in 2010, POSIX 2008 was not as widely available as POSIX 2004, so that's what I used - but YMMV. Note that SUS v3 and v4 both require C99 compilation. On Solaris, at least, using C89 failed.

GCC provides `-std=gnuXX` options

If you specify -std=c11 to GCC (or Clang emulating GCC), then only the standard C definitions are enabled. If you use -std=gnu11, then POSIX and other extensions to standard C are visible by default.

Note that GCC 4.x and earlier used -std=gnu90 (corresponding to C90 plus extensions) by default. GCC 5.x and later use -std=gnu11 by default. There was never a version of GCC that enabled -std=gnu99 by default.

Use a header to control the POSIX version information

I now (2019) use a header to encapsulate this information so that future changes only require the change to a single header, not to every source file that uses POSIX features. It was painful editing the old stanza out of multiple source files as time passed and POSIX 2008 became prevalent.

/*
@(#)File:           $RCSfile: posixver.h,v $
@(#)Version:        $Revision: 1.4 $
@(#)Last changed:   $Date: 2017/06/18 00:15:42 $
@(#)Purpose:        Request appropriate POSIX and X/Open Support
@(#)Author:         J Leffler
@(#)Copyright:      (C) JLSS 2010-2017
*/

/*TABSTOP=4*/

#ifndef JLSS_ID_POSIXVER_H
#define JLSS_ID_POSIXVER_H

/*
** Include this file before including system headers.  By default, with
** C99 support from the compiler, it requests POSIX 2008 support.  With
** C89 support only, it requests POSIX 1997 support.  Override the
** default behaviour by setting either _XOPEN_SOURCE or _POSIX_C_SOURCE.
*/

/* _XOPEN_SOURCE 700 is loosely equivalent to _POSIX_C_SOURCE 200809L */
/* _XOPEN_SOURCE 600 is loosely equivalent to _POSIX_C_SOURCE 200112L */
/* _XOPEN_SOURCE 500 is loosely equivalent to _POSIX_C_SOURCE 199506L */

#if !defined(_XOPEN_SOURCE) && !defined(_POSIX_C_SOURCE)
#if defined(__cplusplus)
#define _XOPEN_SOURCE 700   /* SUS v4, POSIX 1003.1 2008/13 (POSIX 2008/13) */
#elif __STDC_VERSION__ >= 199901L
#define _XOPEN_SOURCE 700   /* SUS v4, POSIX 1003.1 2008/13 (POSIX 2008/13) */
#else
#define _XOPEN_SOURCE 500   /* SUS v2, POSIX 1003.1 1997 */
#endif /* __STDC_VERSION__ */
#endif /* !_XOPEN_SOURCE && !_POSIX_C_SOURCE */

#endif /* JLSS_ID_POSIXVER_H */

You may use the information from this header without the attribution and copyright notice normally required by the "CC by-sa 3.0" licence used by Stack Overflow. This code is available in my SOQ (Stack Overflow Questions) repository on GitHub as file posixver.h in the src/libsoq sub-directory.

I would recommend compiling with -std=gnu99.

To elaborate on this. By default, gcc compiles with -std=gnu89. Here are the results for the following source code.

#include <time.h>

int main() {
    struct timespec asdf;
    return 0;
}

[1:25pm][wlynch@cardiff /tmp] gcc -std=gnu89 foo.c
[1:26pm][wlynch@cardiff /tmp] gcc -std=gnu99 foo.c

[1:25pm][wlynch@cardiff /tmp] gcc -std=c89 foo.c
foo.c: In function ‘main’:
foo.c:4: error: storage size of ‘asdf’ isn’t known

[1:26pm][wlynch@cardiff /tmp] gcc -std=c99 foo.c
foo.c: In function ‘main’:
foo.c:4: error: storage size of ‘asdf’ isn’t known

来源：https://stackoverflow.com/questions/3875197/gcc-with-std-c99-complains-about-not-knowing-struct-timespec

标签