问题
For a project at my university I have to collect information about Google Indoor Maps. I spent several hours searching information about how Google Indoor Navigation really works. I've found several links on how to create Google Floor Plans like this:
http://support.google.com/gmm/bin/answer.py?hl=en&answer=1685896
And how you can improve location accuracy with the Google Maps Floor Plan Marker app:
http://support.google.com/gmm/bin/answer.py?hl=en&answer=2667756&topic=1685871&ctx=topic
They say the app collects public broadcast data. But nowhere information about which information is collected and how. Several discussions here and a few articles I found say that google uses wifi-access points and the cellular antennas for indoor positioning. But I couldn't find any official information from Google, which I can use in my project.
Can you suggest me where I can find answers to the following questions:
- How does the Google Maps Floor Plan Marker really work? Which information is collected and how? A official technical Google paper would be nice, so I can use that for my work.
- How can I increase the accuracy of the Google indoor navigation, by adding Wifi Access Points, Bluetooth stations or other technology?
- How can I add additional information like Emergency exits and toilets to a floor plan, so the user can navigate with his smartphone to this special points?
- Is it possible to add information about rooms, so the user can tap with the finger on them to get additional information? For Example which department is situated in this room and so on?
I found a lot stuff about indoor positioning and indoor navigation. But nothing about how google uses them.
Thanks in advance.
回答1:
This project just provides maps for indoor places. It doesn't do anything special to augment navigation in these places beyond the standard (GPS, WiFi, etc).
When they talk about (augmenting) positioning with Wifi and Cellular data, they are talking about the same stuff they use on the regular Google maps. This data is collected from cell tower info, and the Wifi stuff is sniffed from the Google street-view cars and then augmented by user-data as people with devices come into contact with these devices and send info back to Google.
It is not very accurate - or even accurate as GPS. It is kind of a "ballpark" estimate. For example, if a Google street-view car detected your WiFi signal when it drove by your house - if you had no GPS, and Google Maps saw your WiFi box, it could estimate that you were somewhere within a few hundred feet of where the Google Street View car detected the signal.
Not as accurate as GPS - but not too bad if you conciser within a few hundred feet better than "no idea". In short - these sources to not give you better or more refined positioning of indoor places. They would be good - for example - to be able to tell you that you are in that particular building if you were inside, and out of GPS coverage.
回答2:
Indoor positioning uses WLAN interface. To estimate the real-time location of a user, location systems have to perform a number of steps and various calculations. The calculation of more than one distance from several Access Points (APs) could be used to estimate the exact location. The main principle states that signal strength at the receiver is inversely proportional to the square of the distance that the signal travels. RSS fingerprinting method is used which is based on recording and sampling of patterns of radio signals in specific environment called as pattern recognition or fingerprinting.
回答3:
Since this post is a little old I thought I would still add my thoughts. First of all you can make edits for your own custom maps using MyMaps. As the previous answers stated Google Maps uses cell data, wifi data, gps, etc for tracking. It can also use phone sensor data such as your accellerometer. With the current level of wifi infrastructure it can actually be quite accurate using a method of wifi fingerprinting (The more access points the more accurate it will be given they are effectively positioned). There are several scholarly articles demonstrating its viability down to a couple meters of accuracy. I would suggest reading an article on RSSI fingerprinting. Also check the google maps developer documentation for more detail on editing map information.
Also I was reading that they will be using light detection for additional indoor accuracy (not sure if implemented yet).
来源：https://stackoverflow.com/questions/15639061/how-does-google-indoor-navigation-work