Is there way to track progress on a mclapply?

柔情痞子 提交于 2019-12-03 02:16:33

问题


I love the setting .progress = 'text' in plyr's llply. However, it causes my much anxiety to not know how far along an mclapply (from package multicore) is since list items are sent to various cores and then collated at the end.

I've been outputting messages like *currently in sim_id # ....* but that's not very helpful because it doesn't give me an indicator of what percentage of list items are complete (although it is helpful to know that that my script isn't stuck and moving along).

Can someone suggest other ideas that would allow me to look at my .Rout file and get a sense of progress? I've thought about adding a manual counter but can't see how I would implement that since mclapply must finish processing all list items before it can give out any feedback.


回答1:


Due to the fact that mclapply spawns multiple processes, one might want to use fifos, pipes, or even sockets. Now consider the following example:

library(multicore)

finalResult <- local({
    f <- fifo(tempfile(), open="w+b", blocking=T)
    if (inherits(fork(), "masterProcess")) {
        # Child
        progress <- 0.0
        while (progress < 1 && !isIncomplete(f)) {
            msg <- readBin(f, "double")
            progress <- progress + as.numeric(msg)
            cat(sprintf("Progress: %.2f%%\n", progress * 100))
        } 
        exit()
    }
    numJobs <- 100
    result <- mclapply(1:numJobs, function(...) {
        # Dome something fancy here
        # ...
        # Send some progress update
        writeBin(1/numJobs, f)
        # Some arbitrary result
        sample(1000, 1)
    })
    close(f)
    result
})

cat("Done\n")

Here, a temporary file is used as fifo, and the main process forks a child whose only duty is to report the current progress. The main process continues by calling mclapply where the expression (more precisely, the expression block) that is to be evaluated writes partial progress information to the fifo buffer by means of writeBin.

As this is only a simple example, you'll probably have to adapt the whole output stuff to your needs. HTH!




回答2:


Essentially adding another version of @fotNelson's solution but with some modifications:

  • Drop in replacement for mclapply (supports all mclapply functions)
  • Catches ctrl-c calls and aborts gracefully
  • uses built in progress bar (txtProgressBar)
  • option to track progress or not and use a specified style of progress bar
  • uses parallel rather than multicore which has now been removed from CRAN
  • coerces X to list as per mclapply (so length(X) gives expected results)
  • roxygen2 style documentation at the top

Hope this helps someone...

library(parallel)

#-------------------------------------------------------------------------------
#' Wrapper around mclapply to track progress
#' 
#' Based on http://stackoverflow.com/questions/10984556
#' 
#' @param X         a vector (atomic or list) or an expressions vector. Other
#'                  objects (including classed objects) will be coerced by
#'                  ‘as.list’
#' @param FUN       the function to be applied to
#' @param ...       optional arguments to ‘FUN’
#' @param mc.preschedule see mclapply
#' @param mc.set.seed see mclapply
#' @param mc.silent see mclapply
#' @param mc.cores see mclapply
#' @param mc.cleanup see mclapply
#' @param mc.allow.recursive see mclapply
#' @param mc.progress track progress?
#' @param mc.style    style of progress bar (see txtProgressBar)
#'
#' @examples
#' x <- mclapply2(1:1000, function(i, y) Sys.sleep(0.01))
#' x <- mclapply2(1:3, function(i, y) Sys.sleep(1), mc.cores=1)
#' 
#' dat <- lapply(1:10, function(x) rnorm(100)) 
#' func <- function(x, arg1) mean(x)/arg1 
#' mclapply2(dat, func, arg1=10, mc.cores=2)
#-------------------------------------------------------------------------------
mclapply2 <- function(X, FUN, ..., 
    mc.preschedule = TRUE, mc.set.seed = TRUE,
    mc.silent = FALSE, mc.cores = getOption("mc.cores", 2L),
    mc.cleanup = TRUE, mc.allow.recursive = TRUE,
    mc.progress=TRUE, mc.style=3) 
{
    if (!is.vector(X) || is.object(X)) X <- as.list(X)

    if (mc.progress) {
        f <- fifo(tempfile(), open="w+b", blocking=T)
        p <- parallel:::mcfork()
        pb <- txtProgressBar(0, length(X), style=mc.style)
        setTxtProgressBar(pb, 0) 
        progress <- 0
        if (inherits(p, "masterProcess")) {
            while (progress < length(X)) {
                readBin(f, "double")
                progress <- progress + 1
                setTxtProgressBar(pb, progress) 
            }
            cat("\n")
            parallel:::mcexit()
        }
    }
    tryCatch({
        result <- mclapply(X, ..., function(...) {
                res <- FUN(...)
                if (mc.progress) writeBin(1, f)
                res
            }, 
            mc.preschedule = mc.preschedule, mc.set.seed = mc.set.seed,
            mc.silent = mc.silent, mc.cores = mc.cores,
            mc.cleanup = mc.cleanup, mc.allow.recursive = mc.allow.recursive
        )

    }, finally = {
        if (mc.progress) close(f)
    })
    result
}



回答3:


The pbapply package has implemented this for the general case. Both pblapply and pbsapply have a cl argument. From the documentation:

Parallel processing can be enabled through the cl argument. parLapply is called when cl is a ’cluster’ object, mclapply is called when cl is an integer. Showing the progress bar increases the communication overhead between the main process and nodes / child processes compared to the parallel equivalents of the functions without the progress bar. The functions fall back to their original equivalents when the progress bar is disabled (i.e. getOption("pboptions")$type == "none" dopb() is FALSE). This is the default when interactive() if FALSE (i.e. called from command line R script).

If one does not supply cl (or passes NULL) the default non-parallel lapply is used, also including a progress bar.




回答4:


Here's a function based on @fotNelton's solution to apply wherever you would normally use mcapply.

mcadply <- function(X, FUN, ...) {
  # Runs multicore lapply with progress indicator and transformation to
  # data.table output. Arguments mirror those passed to lapply.
  #
  # Args:
  # X:   Vector.
  # FUN: Function to apply to each value of X. Note this is transformed to 
  #      a data.frame return if necessary.
  # ...: Other arguments passed to mclapply.
  #
  # Returns:
  #   data.table stack of each mclapply return value
  #
  # Progress bar code based on https://stackoverflow.com/a/10993589
  require(multicore)
  require(plyr)
  require(data.table)

  local({
    f <- fifo(tempfile(), open="w+b", blocking=T)
    if (inherits(fork(), "masterProcess")) {
      # Child
      progress <- 0
      print.progress <- 0
      while (progress < 1 && !isIncomplete(f)) {
        msg <- readBin(f, "double")
        progress <- progress + as.numeric(msg)
        # Print every 1%
        if(progress >= print.progress + 0.01) {
          cat(sprintf("Progress: %.0f%%\n", progress * 100))
          print.progress <- floor(progress * 100) / 100
        }
      }
      exit()
    }

    newFun <- function(...) {
      writeBin(1 / length(X), f)
      return(as.data.frame(FUN(...)))
    }

    result <- as.data.table(rbind.fill(mclapply(X, newFun, ...)))
    close(f)
    cat("Done\n")
    return(result)
  })
}



回答5:


Based on the answer of @fotNelson, using a progress bar instead of line by line printing and calling an external function with mclapply.

library('utils')
library('multicore')

prog.indic <- local({ #evaluates in local environment only
    f <- fifo(tempfile(), open="w+b", blocking=T) # open fifo connection
    assign(x='f',value=f,envir=.GlobalEnv)
    pb <- txtProgressBar(min=1, max=MC,style=3)

    if (inherits(fork(), "masterProcess")) { #progress tracker
        # Child
        progress <- 0.0
        while (progress < MC && !isIncomplete(f)){ 
            msg <- readBin(f, "double")
                progress <- progress + as.numeric(msg)

            # Updating the progress bar.
            setTxtProgressBar(pb,progress)
            } 


        exit()
        }
   MC <- 100
   result <- mclapply(1:MC, .mcfunc)

    cat('\n')
    assign(x='result',value=result,envir=.GlobalEnv)
    close(f)
    })

.mcfunc<-function(i,...){
        writeBin(1, f)
        return(i)
    }

Assigning the fifo connection to the .GlobalEnv is necessary to use it from a function outside of the mclapply call. Thanks for the questions and the previous replies, I had been wondering how to do this for a while.




回答6:


You can use your systems echo function to write from your workers, so simply add the following line to your function:

myfun <- function(x){
if(x %% 5 == 0) system(paste("echo 'now processing:",x,"'"))
dosomething(mydata[x])
}

result <- mclapply(1:10,myfun,mc.cores=5)
> now processing: 5 
> now processing: 10 

This will work if you pass an index e.g., so rather than passing a list of data, pass the index and extract the data in the worker function.



来源:https://stackoverflow.com/questions/10984556/is-there-way-to-track-progress-on-a-mclapply

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!