UIButton doesn't listen to content mode setting?

问题

firstButton is a UIButton of type Custom. I'm programmatically putting three of them across each cell of a table, thusly:

[firstButton setImage:markImage forState:UIControlStateNormal];
[firstButton setContentMode:UIViewContentModeScaleAspectFit];
[cell.contentView addSubview:firstButton];

Elsewhere, I'm telling it to clipToBounds. What I get is a crop of the center square of the image, rather than an aspect-scaled rendering of it. I've tried this lots of ways, including setting the mode property on firstButton.imageView, which also doesn't seem to work.

回答1:

I had the same problem. I see this question is a little old, but I want to provide a clear and correct answer to save other folks (like me) some time when it pops up in their search results.

It took me a bit of searching and experimenting, but I found the solution. Simply set the ContentMode of the "hidden" ImageView that is inside the UIButton.

[[firstButton imageView] setContentMode: UIViewContentModeScaleAspectFit];
[firstButton setImage:[UIImage imageNamed:imageName] forState:UIControlStateNormal];

Perhaps that's what Dan Ray was alluding to in his accepted answer, but I suspect not.

回答2:

If you're dealing with the UIButton's image (as opposed to it's backgroundImage), setting the contentMode on the UIButton itself or on its imageView has no effect (despite what other answers say).

Alternatively do this instead:

self.button.contentHorizontalAlignment = UIControlContentHorizontalAlignmentFill;
self.button.contentVerticalAlignment = UIControlContentVerticalAlignmentFill;

Or size your image accordingly.

OR just use a UIImageView (which properly respects contentMode) with a UITapGestureRecognizer attached to it, or a transparent UIButton on top of it.

回答3:

Rather than setting the contentMode on the button itself, you'll want to set contentHorizontalAlignment and contentVerticalAlignment properties and (crucially) the contentMode for the button's imageView for any kind of aspect fill or fit. Here's an example:

button.contentHorizontalAlignment = UIControlContentHorizontalAlignmentFill;
button.contentVerticalAlignment = UIControlContentVerticalAlignmentFill;
button.imageView.contentMode = UIViewContentModeScaleAspectFit;

Of course, you can also do other things like aligning the button's image to the top of the button. If you don't need an aspect fill or fit, you just can set the alignment by itself:

button.contentVerticalAlignment = UIControlContentVerticalAlignmentTop;

In Swift, you'll want to use:

button.contentHorizontalAlignment = .fill
button.contentVerticalAlignment = .fill
button.imageView?.contentMode = .scaleAspectFit

This works for all versions of iOS, including the latest versions with auto-layout, (i.e. iOS 4 up to iOS 11+).

回答4:

After a couple of hours of confusion, here's how I got it to work under iOS 3.2. As dusker mentioned, using setBackgroundImage instead of setImage did the job for me.

CGRect myButtonFrame = CGRectMake(0, 0, 250, 250);
UIImage *myButtonImage = [UIImage imageNamed:@"buttonImage"];

UIButton *myButton = [UIButton buttonWithType:UIButtonTypeCustom];

[myButton setBackgroundImage:myButtonImage forState:UIControlStateNormal];
[myButton setFrame: myButtonFrame];
[myButton setContentMode: UIViewContentModeScaleAspectFit];

回答5:

The answer is to use a UIImageView with all the lovely Content Mode settings you want, and then layer a custom button on top of it. Dumb that you can't do that all in one shot, but it appears that you can't.

回答6:

Found a fix for this. Set the adjustsImageWhenHighlighted property of UIButton to NO.

  UIButton *b = [[UIButton alloc] initWithFrame:rect];
        [b setImage:image forState:UIControlStateNormal];
        [b.imageView setContentMode:UIViewContentModeScaleAspectFill];
        [b setAdjustsImageWhenHighlighted:NO];

Hope this helps. Feel free to comment below, I will follow up on any questions that you have.

回答7:

My answer is similar to Kuba's. I needed my image to be programatically set.

UIImage *image = [[UIImage alloc] initWithContentsOfFile:...];
[button setBackgroundImage:image forState:UIControlStateNormal];
button.imageView.contentMode = UIViewContentModeScaleAspectFill; //this is needed for some reason, won't work without it.
for(UIView *view in button.subviews) {
    view.contentMode = UIViewContentModeScaleAspectFill;
}

回答8:

Only solution which worked for me:

[button setImage:image forState:UIControlStateNormal];
button.imageView.contentMode = UIViewContentModeScaleAspectFill;
button.contentHorizontalAlignment = UIControlContentHorizontalAlignmentFill;
button.contentVerticalAlignment = UIControlContentVerticalAlignmentFill;

回答9:

Swift 3

self.firstButton.imageView?.contentMode = .scaleAspectFill

回答10:

Instead of setImage try setBackgroundImage

回答11:

I believe we have a simple interface builder issue here - apparently the IB ignores any content-mode changes AFTER you have set the image-property.

the solution is as simple: set the content mode, remove previously set image-names (make sure you remove it in all states, default, highlighted etc.), then re-enter the desired image-names in all desired states - et voilà.

回答12:

I also advice to have a look at the adjustsImageWhenHighlighted UIButton property to avoid weird deformations of the image, when the button is pressed.

回答13:

In trying to figure this out, my method got a bit hackier as time went on, and I wound up subclassing UIButton and overriding setHighlighted:

For me it works to just knock down the image alpha to .5, because they're on a black background.

However, it only works if I comment out [super setHighlighted:] (where it appears the image-stretchy code is going on), which just doesn't feel like the right way to solve this at all...everything seems to be working fine, though. We'll see how it holds up as I keep working on it.

- (void)setHighlighted:(BOOL)highlight {
    if (highlight) {
        [self.imageView setAlpha:.5];
    }  else {
        [self.imageView setAlpha:1];        
    }

//    [super setHighlighted:highlight];
}

回答14:

If anyone looking for answer that work in iOS 6 and iOS 7 and storyboard:

You can set image in your storyboard:

And then:

for(UIView* testId in self.subviews) {
    if([testId isKindOfClass:[UIImageView class]])
        [testId setContentMode:UIViewContentModeScaleAspectFill];
}

回答15:

If the UIButton does not seem to listen to the layout constraint settings, do check whether the images are larger than the button size. Always use the @2x and @3x images for retina resolutions.

来源：https://stackoverflow.com/questions/2950613/uibutton-doesnt-listen-to-content-mode-setting