Android fastboot waiting for devices

Question

I am trying to load a customized kernel on my NVIDIA test git. I typed fastboot boot myImage after which which I get:

<Waiting for device> 

I think this is a problem with a driver on fastboot mode on my device. But I don't know how to install the driver on linux.

Do you guys know how to install the driver?

Answer 1

The short version of the page linked by D Shu (and without the horrible popover ads) is that this "waiting for device" problem happens when the USB device node is not accessible to your current user. The USB id is different in fastboot mode, so you can easily have permission to it in adb but not in fastboot.

To fix it (on Ubuntu; other systems may be slightly different):

Run lsusb -v | less and find the relevant section which will look something like this:

Bus 001 Device 027: ID 18d1:4e30 Google Inc. 
Couldn't open device, some information will be missing
Device Descriptor:
...
  idVendor           0x18d1 Google Inc.

Now do

sudo vi /etc/udev/rules.d/11-android.rules

it's ok if that file does not yet exist; create it with a line like this, inserting your own username and vendor id:

SUBSYSTEMS=="usb", ATTRS{idVendor}=="18d1", MODE="0640", OWNER="mbp"

then

sudo service udev restart

then verify the device node permissions have changed:

ls -Rl /dev/bus/usb

The even shorter cheesy version is to just run fastboot as root. But then you need to run every command that talks to the device as root, which tends to cause other complications. Simpler just to fix the permissions in the long run.

Answer 2

Just use sudo, fast boot needs Root Permission

Answer 3

To use the fastboot command you first need to put your device in fastboot mode:

$ adb reboot bootloader

Once the device is in fastboot mode, you can boot it with your own kernel, for example:

$ fastboot boot myboot.img

The above will only boot your kernel once and the old kernel will be used again when you reboot the device. To replace the kernel on the device, you will need to flash it to the device:

$ fastboot flash boot myboot.img

Hope that helps.

Answer 4

try to use compiler generated fastboot when this happes. the file path is out/host/linux(or other)/bin/fastboot and sudo is also needed. it works in most of the time.

Answer 5

On your device Go To Settings -> Dev Settings, And Select "Allow OEM Unlock" As shown on Unlock Your Bootloader

At least this worked for me on my MotoE 4G.

Answer 6

In my case (on windows 10), it would connect fine to adb and I could type any adb commands. But as soon as it got to the bootloader using adb reboot bootloader I wasn't able to perform any fastboot commands.

What I did notice that in the device manager that it refreshed when I connected to device. Next thing to do was to check what changed when connecting. Apparently the fastboot device was inside the Kedacom USB Device. Not really sure what that was, but I updated the device to use a different driver, in my case the Fastboot interface (Google USB ID), and that fixed my waiting for device issue

Answer 7

The shortest answer is first run the fastboot command (in my ubuntu case i.e. ./fastboot-linux oem unlock) (here i'm using ubuntu 12.04 and rooting nexus4) then power on your device in fastboot mode (in nexus 4 by pressing vol-down-key and power button)