I have a question about my haproxy config:
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
log 127.0.0.1 syslog emerg
maxconn 4000
quiet
user haproxy
group haproxy
daemon
#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
mode http
log global
option abortonclose
option dontlognull
option httpclose
option httplog
option forwardfor
option redispatch
timeout connect 10000 # default 10 second time out if a backend is not found
timeout client 300000 # 5 min timeout for client
timeout server 300000 # 5 min timeout for server
stats enable
listen http_proxy localhost:81
balance roundrobin
option httpchk GET /empty.html
server server1 myip:80 maxconn 15 check inter 10000
server server2 myip:80 maxconn 15 check inter 10000
As you can see it is straight forward, but I am a bit confused about how the maxconn properties work.
There is the global one and the maxconn on the server, in the listen block. My thinking is this: the global one manages the total number of connections that haproxy, as a service, will queue or process at one time. If the number gets above that, it either kills the connection, or pools in some linux socket? I have no idea what happens if the number gets higher than 4000.
Then you have the server maxconn property set at 15. First off, I set that at 15 because my php-fpm, this is forwarding to on a separate server, only has so many child processes it can use, so I make sure I am pooling the requests here, instead of in php-fpm. Which I think is faster.
But back on the subject, my theory about this number is each server in this block will only be sent 15 connections at a time. And then the connections will wait for an open server. If I had cookies on, the connections would wait for the CORRECT open server. But I don't.
So questions are:
- What happens if the global connections get above 4000? Do they die? Or pool in Linux somehow?
- Are the global connection related to the server connections, other than the fact you can't have a total number of server connections greater than global?
- When figuring out the global connections, shouldn't it be the amount of connections added up in the server section, plus a certain percentage for pooling? And obviously you have other restrains on the connections, but really it is how many you want to send to the proxies?
Thank you in advance.
Willy got me an answer by email. I thought I would share it. His answers are in bold.
I have a question about my haproxy config:
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
log 127.0.0.1 syslog emerg
maxconn 4000
quiet
user haproxy
group haproxy
daemon
#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
mode http
log global
option abortonclose
option dontlognull
option httpclose
option httplog
option forwardfor
option redispatch
timeout connect 10000 # default 10 second time out if a backend is not found
timeout client 300000 # 5 min timeout for client
timeout server 300000 # 5 min timeout for server
stats enable
listen http_proxy localhost:81
balance roundrobin
option httpchk GET /empty.html
server server1 myip:80 maxconn 15 check inter 10000
server server2 myip:80 maxconn 15 check inter 10000
As you can see it is straight forward, but I am a bit confused about how the maxconn properties work.
There is the global one and the maxconn on the server, in the listen block.
And there is also another one in the listen block which defaults to something like 2000.
My thinking is this: the global one manages the total number of connections that haproxy, as a service, will que or process at one time.
Correct. It's the per-process max number of concurrent connections.
If the number gets above that, it either kills the connection, or pools in some linux socket?
The later, it simply stops accepting new connections and they remain in the socket queue in the kernel. The number of queuable sockets is determined by the min of (net.core.somaxconn, net.ipv4.tcp_max_syn_backlog, and the listen block's maxconn).
I have no idea what happens if the number gets higher than 4000.
The excess connections wait for another one to complete before being accepted. However, as long as the kernel's queue is not saturated, the client does not even notice this, as the connection is accepted at the TCP level but is not processed. So the client only notices some delay to process the request. But in practice, the listen block's maxconn is much more important, since by default it's smaller than the global one. The listen's maxconn limits the number of connections per listener. In general it's wise to configure it for the number of connections you want for the service, and to configure the global maxconn to the max number of connections you let the haproxy process handle. When you have only one service, both can be set to the same value. But when you have many services, you can easily understand it makes a huge difference, as you don't want a single service to take all the connections and prevent the other ones from working.
Then you have the server maxconn property set at 15. First off, I set that at 15 because my php-fpm, this is forwarding to on a separate server, only has so many child processes it can use, so I make sure I am pooling the requests here, instead of in php-fpm. Which I think is faster.
Yes, not only it should be faster, but it allows haproxy to find another available server whenever possible, and also it allows it to kill the request in the queue if the client hits "stop" before the connection is forwarded to the server.
But back on the subject, my theory about this number is each server in this block will only be sent 15 connections at a time. And then the connections will wait for an open server. If I had cookies on, the connections would wait for the CORRECT open server. But I don't.
That's exactly the principle. There is a per-proxy queue and a per-server queue. Connections with a persistence cookie go to the server queue and other connections go to the proxy queue. However since in your case no cookie is configured, all connections go to the proxy queue. You can look at the diagram doc/queuing.fig in haproxy sources if you want, it explains how/where decisions are taken.
So questions are:
What happens if the global connections get above 4000? Do they die? Or pool in Linux somehow?
They're queued in linux. Once you overwhelm the kernel's queue, then they're dropped in the kernel.
Are the global connection related to the server connections, other than the fact you can't have a total number of server connections greater than global?
No, global and server connection settings are independant.
When figuring out the global connections, shouldn't it be the amount of connections added up in the server section, plus a certain percentage for pooling? And obviously you have other restrains on the connections, but really it is how many you want to send to the proxies?
You got it right. If your server's response time is short, there is nothing wrong with queueing thousands of connections to serve only a few at a time, because it substantially reduces the request processing time. Practically, establishing a connection nowadays takes about 5 microseconds on a gigabit LAN. So it makes a lot of sense to let haproxy distribute the connections as fast as possible from its queue to a server with a very small maxconn. I remember one gaming site queuing more than 30000 concurrent connections and running with a queue of 30 per server ! It was an apache server, and apache is much faster with small numbers of connections than with large numbers. But for this you really need a fast server, because you don't want to have all your clients queued waiting for a connection slot because the server is waiting for a database for instance. Also something which works very well is to dedicate servers. If your site has many statics, you can direct the static requests to a pool of servers (or caches) so that you don't queue static requests on them and that the static requests don't eat expensive connection slots. Hoping this helps, Willy
来源：https://stackoverflow.com/questions/8750518/difference-between-global-maxconn-and-server-maxconn-haproxy