onvif

Once I get a response back from the UDP Multicast Request to 239.255.255.250 I get back a ProbeMatch with an XAddrs http://10.10.10.10:1234/onvif/device_service How do I now do the GetSystemDateAndTime and GetDeviceInformation Is this a TCP/UDP request to 10.10.10.10 port 1234 ? Is this a HTTP request to 10.10.10.10 port 80 ? Or What Once I have the device's address http:10.10.10.10:1234/onvif/device_service Then what Thanks in advance You need to send there just a HTTP request as SOAP works over HTTP. For example via CURL it would be like this: curl 10.10.10.10:1234/onvif/device_service -d '

宇视摄像机RTSP地址规则为：rtsp://{用户名}:{密码}@{ip}:{port}/video1/2/3，分别对应主/辅/三码流； 比如： rtsp://admin:admin@192.168.8.8:554/video1，就表示主码流； rtsp://admin:admin@192.168.8.8:554/video2，表示子码流； rtsp://admin:admin@192.168.8.8:554/video3，表示3码流； 二、通用摄像机RTSP取流URL地址规则 现在实际上现在已经不用再这么复杂地获取RTSP的取流地址了，因为大部分的IPC或者NVR都基本支持了Onvif协议，通过Onvif Device Test Tool或者EasyNVR这样的工具，可以直接发现到设备的RTSP流地址，不用再自己来拼接了，以EasyNVR为例： 更多流媒体音视频技术资源 EasyDarwin开源流媒体服务器： www.EasyDarwin.org EasyDSS高性能互联网直播服务： www.EasyDSS.com EasyNVR安防视频可视化服务： www.EasyNVR.com EasyNVS视频综合管理平台： www.EasyNVS.com EasyNTS云组网： www.EasyNTS.com EasyGBS国标GB/T28181服务器： www.EasyGBS.com

This question has been discussed in several topics here but I could not find the answer for me. What I'm trying to do is use an IP camera through the Onvif interface. I've generated the web services from the WSDL files available in the Onvif homepage, and added the custom SOAP authentication code as suggested here , and I am able to retrieve the device capabilities etc. etc. But for some services, e.g, PTZ control, also HTTP authentication is needed. My code removes the ClientCredentials behaivor (so yeah, I guess setting them does not make any sense, but I still left those lines in hope that

I'm going to use Apache CXF for ONVIF-compatible ip camera service. It uses WS-Discovery to find devices and services and cxf supports it out-of-box: The cxf-services-ws-discovery-service jar will register a ServerLifecyleListener that will automatically publish the "Hello" messages. It will also respond to any Probe requests that match the services it has published. How will cxf detect device type to send in ProbeMatches response? How can i specify that my device is ip camera (i need to set concrete device type in ProbeMatches response, NetworkVideoTransmitter for example)? After looking into

My question is about the ONVIF specification. http://www.onvif.org/imwp/download.asp?ContentID=18006 In section 5.10, it says : A service is a collection of related ports. This specification does not mandate any service naming principles. Lets say that I have the IP address of an NVT (Network Video Transmitter like an IP camera for example), how do I form the address of the device management web service? This service is the entry point of the whole system. Thank you. Şafak According to the official document (section 5.1.1), you can access the service at http://<IP address>/onvif/device_service

My new surveillance camera just arrived, so I'm trying to write an app to live stream the video from it. Since it came with basically no documentation, I installed the 'onvifer' android app which allows you to browse the camera's capabilities. This app works fine - gets the video and allows PTZ controls, etc. It reports the streaming url as: rtsp://192.1.0.193:554/mpeg4 I tested the stream in the VLC windows client, and it's able to stream video from that URL as well. This makes me comfortable that the network is working OK. The camera states the feed will be 1920x1080; VLC confirms this. The

I'm developing an application that will probe ONVIF devices attached on network for auto-discovery. According to ONVIF Core specification SOAP format of Probe message is : <?xml version="1.0" encoding="UTF-8"?> <e:Envelope xmlns:e="http://www.w3.org/2003/05/soap-envelope" xmlns:w="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:d="http://schemas.xmlsoap.org/ws/2005/04/discovery" xmlns:dn="http://www.onvif.org/ver10/network/wsdl"> <e:Header> <w:MessageID>uuid:84ede3de-7dec-11d0-c360-f01234567890</w:MessageID> <w:To e:mustUnderstand="true">urn:schemas-xmlsoap-org:ws:2005:04:discovery</w

EasyNVR的使用者应该都是清楚的知道，EasyNVR一个强大的功能就是可以进行全平台的无插件直播。主要原因在于rtsp协议的视频流（默认是需要插件才可以播放的）经由EasyNVR处理后可以满足无插件的全平台直播。处理后会获取到RTMP、HLS视频流，这就完美解决了插件直播的问题，只要终端设备支持H5，就可以播放EasyNVR分发出的视频流。 windows设备上双击EasyNVR无法启动程序 windows设备上双击EasyNVR、EasyDSS、EasyGBS可以执行文件无法启动程序问题？ 问题分析 正常情况是双击执行文件可以启动对应服务，完成对应的功能服务需求，双击无法执行，无非就是系统对自身的保护导致的执行文件文法执行或者是对执行文件的执行权限没有满足对应的需要。 解决问题 通过远程客户现场，分析现场执行程序的对应属性发现，是由于运行软件的服务器自身的保护机制，阻止外来程序的启动，需要我们手动的信任执行文件，添加信任即可正常运行软件启动服务。 具体操作步骤： 右击执行文件->查看执行文件属性->勾选“常规”选项下“安全”栏目的勾选框。后续点击应用、确定完成设置。 来源： https://www.cnblogs.com/EasyNVR/p/11790788.html

可以将文章内容翻译成中文,广告屏蔽插件可能会导致该功能失效(如失效，请关闭广告屏蔽插件后再试): 问题: Once I get a response back from the UDP Multicast Request to 239.255.255.250 I get back a ProbeMatch with an XAddrs http://10.10.10.10:1234/onvif/device_service How do I now do the GetSystemDateAndTime and GetDeviceInformation Is this a TCP/UDP request to 10.10.10.10 port 1234 ? Is this a HTTP request to 10.10.10.10 port 80 ? Or What Once I have the device's address http:10.10.10.10:1234/onvif/device_service Then what Thanks in advance 回答1: You need to send there just a HTTP request as SOAP works over HTTP. For example via CURL it would be