gammu

Gammu can not receive sms

由 ￡可爱￡侵袭症＋ 提交于 2021-02-19 04:10:07
问题 I have a USB-Modem Manufacturer:Huawei Model:E3531. On the computer, the Gammu version 1.38.3 and Gammu-smsd version 1.38.3. installed. lsusb: Bus 001 Device 011: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Gammu-Config: [gammu] port = /dev/ttyUSB0 model = E3531 connection = at19200 synchronizetime = yes logfile = /var/log/gammu.log logformat = errorsdate use_locking = gammuloc = I cannot receive sms the command gammu getallsms show me this output: 0 SMS parts in 0

Gammu can not receive sms

由 旧城冷巷雨未停 提交于 2021-02-19 04:06:31
问题 I have a USB-Modem Manufacturer:Huawei Model:E3531. On the computer, the Gammu version 1.38.3 and Gammu-smsd version 1.38.3. installed. lsusb: Bus 001 Device 011: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Gammu-Config: [gammu] port = /dev/ttyUSB0 model = E3531 connection = at19200 synchronizetime = yes logfile = /var/log/gammu.log logformat = errorsdate use_locking = gammuloc = I cannot receive sms the command gammu getallsms show me this output: 0 SMS parts in 0

Gammu can not receive sms

由 给你一囗甜甜゛ 提交于 2021-02-19 04:06:07
问题 I have a USB-Modem Manufacturer:Huawei Model:E3531. On the computer, the Gammu version 1.38.3 and Gammu-smsd version 1.38.3. installed. lsusb: Bus 001 Device 011: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Gammu-Config: [gammu] port = /dev/ttyUSB0 model = E3531 connection = at19200 synchronizetime = yes logfile = /var/log/gammu.log logformat = errorsdate use_locking = gammuloc = I cannot receive sms the command gammu getallsms show me this output: 0 SMS parts in 0

DLINK DWM 157 Extra operator report during each operation

由 偶尔善良 提交于 2019-12-25 18:39:18
问题 I was working with a D-Link dwm-157 with Firmware Version 1.0.1du, I could send SMS with at commands and everything were ok, recently I have bought D-Link dwm-157 with Firmware Version 4.0.2MES, because the old module has been stopped production. There are little changes between calling a commands in these two modules. In the old one, when I call this: AT+CUSD=1,"*140#" I get this output: OK +CUSD= 2, "the result of USSD call", 15 But in new module the result is : +SPNWNAME: "432", "11", "Mci

Error trying to send sms by php

由 ∥☆過路亽．° 提交于 2019-12-25 03:29:30
问题 I installed gammu in linux and I can send sms using the shell command. But when I add the command in a php page I get the following error: $phone = 3588459717; echo shell_exec ('gammu sendSms TEXT '.$phone.' -text "test msg"'); Error opening device, it does not exist. 回答1: Most likely the web server is running as different user and Gammu running under this user does not see your configuration file and/or does not have permissions to open the device. 回答2: php process under apache Server, runs

Gammu SMS in Arabic using PHP does not be delivered

由 本秂侑毒 提交于 2019-12-24 23:37:21
问题 I'm trying to have my own SMS gateway on my server using PHP. I have installed Gammu and I configured the permissions and settings well. Now it send SMS fine using the following prototype script: <?php $text = $_POST['text']; $numb = $_POST['numb']; if ($text != '' && $numb != ''){ //die('echo "'.$text.'" | gammu --sendsms TEXT '.$numb); echo "<pre>"; //die(passthru('whoami')); $command = 'echo "'.$text.'" | gammu --sendsms TEXT '.$numb.' >> '.__DIR__.'/smslog.txt';//.'" | gammu --sendsms

How to configure gammu-smsd with mysql

由 孤人 提交于 2019-12-23 03:34:35
问题 I'm trying to start the gammu sms service, when I run it with simple archives, it runs fine, but when I try to run it with the mysql database, it shows this error: Error code: 2002, Error: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) The restart gammu-sms, show this message: user2@Lubuntu18:~$ service gammu-smsd restart user2@Lubuntu18:~$ service gammu-smsd status ● gammu-smsd.service - SMS daemon for Gammu Loaded: loaded (/lib/systemd/system/gammu-smsd

gammu 1.38.5 compile with native_pgsql, --Could not find PostgreSQL

由 旧时模样 提交于 2019-12-11 15:36:16
问题 I m trying compile gammu 1.38.5 on my mac os x El Capitan with postgresql native lib support by fellowing instruction I found in Gammu document. I had my PostgreSQL 9.4 installed and running my Mac OS X as database server. smsd database and user was created to support Gammu SMS gateway services. PostgreSQL was installed in default location /Library/PostgreSQL/9.4 in Mac OSX. include and lib directory can be found here. I had set up POSTGRESQL_PATH point to /Library/PostgreSQL/9.4 and then

How to configure gammu-smsd with mysql

由 不羁的心 提交于 2019-12-06 14:54:23
I'm trying to start the gammu sms service, when I run it with simple archives, it runs fine, but when I try to run it with the mysql database, it shows this error: Error code: 2002, Error: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) The restart gammu-sms, show this message: user2@Lubuntu18:~$ service gammu-smsd restart user2@Lubuntu18:~$ service gammu-smsd status ● gammu-smsd.service - SMS daemon for Gammu Loaded: loaded (/lib/systemd/system/gammu-smsd.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sat 2018-08-18 20

How to Gammu sendsms php shell_exec windows 7 and xampp?

由 删除回忆录丶 提交于 2019-12-02 03:36:42
问题 I have already installed XAMPP latest version and installed gammu. In terminal I can send sms or identify my cellphone, but if i try the same command on php shell_exec or exec there is something wrong. The command: "C:\Program Files\gammu\bin\gammu.exe" --sendsms TEXT 06706177529 -text "halooo" This works. The command in php: $a = shell_exec('"C:\Program Files\gammu\bin\gammu.exe" --sendsms TEXT 06706177529 -text "halooo"'); This write to me: Warning: No configuration file found! Warning: No
订阅 gammu