filezilla

Cannot connect FTP to Azure virtual machine

笑着哭i 提交于 2021-02-19 05:48:11
问题 I provisioned a Windows Server 2012 vm in Azure. When I try to connect to it via FileZilla FTP client I get a Could not connect to server error . Here's what I have tried so far: Added inbound rule for FTP (TCP/21) in the Azure portal In IIS, configured FTP Firewall Support. Set Data Channel Port Range to 7000-7002 , External IP Address of Firewall to my vm's public IP , added 7000, 7001 and 7002 to inbound rules , did a net start/stop ftpsvc 回答1: The step I'm missing in your description, is

How to publish asp.net core app Dlls without having to stop the application

时光怂恿深爱的人放手 提交于 2021-02-04 22:10:23
问题 When i try to publish the .net core app Dlls using ftp via filezilla tool it shows an error message that the file is in use by another process. It's understandable that the above message shows because the the file is used by dotnet.exe which is a separate process. To overcome the issue i have to stop the application in iis each time then upload the dlls and then restart it. Due to which a very small down time is experienced , the asp.net identity session expires and it needs rdp to the server

How to publish asp.net core app Dlls without having to stop the application

 ̄綄美尐妖づ 提交于 2021-02-04 22:08:40
问题 When i try to publish the .net core app Dlls using ftp via filezilla tool it shows an error message that the file is in use by another process. It's understandable that the above message shows because the the file is used by dotnet.exe which is a separate process. To overcome the issue i have to stop the application in iis each time then upload the dlls and then restart it. Due to which a very small down time is experienced , the asp.net identity session expires and it needs rdp to the server

FTP in passive mode : EHOSTUNREACH - No route to host

痴心易碎 提交于 2021-01-27 14:51:58
问题 I have a FTP server which was running for about a month without any problem. Today, I cannot connect to it with filezilla, I get this message : The data connection could not be established: EHOSTUNREACH - No route to host I searched on Google/SO and found that it might be a TLS problem. However, I can connect to the FTP server using the console : $ ftp ftp> open mymachine.mycompany.com Connected to mymachine.mycompany.com 220 Bienvenue sur le serveur FTP mymachine.mycompany.com. Name

FTP in passive mode : EHOSTUNREACH - No route to host

余生长醉 提交于 2021-01-27 14:35:14
问题 I have a FTP server which was running for about a month without any problem. Today, I cannot connect to it with filezilla, I get this message : The data connection could not be established: EHOSTUNREACH - No route to host I searched on Google/SO and found that it might be a TLS problem. However, I can connect to the FTP server using the console : $ ftp ftp> open mymachine.mycompany.com Connected to mymachine.mycompany.com 220 Bienvenue sur le serveur FTP mymachine.mycompany.com. Name

change file persmissions filezilla command line windows

安稳与你 提交于 2020-06-02 11:16:06
问题 How do I change the file permissions in filezilla with the command line? I tried 'SITE CHMOD 755 templates' but that only changes the folder 'templates'. I want to chmod all files in the templates folder and the subfolders in there. I know you can do this by clicking rmb om the templates folder etc. but that is way to slow I was hoping the command line would be faster? If not, what is the best way to change a lot of file permissions on your server fast? I'm using filezilla in windows. 回答1:

FileZilla 425 Can't open data connection

旧巷老猫 提交于 2020-04-07 11:10:21
WIN 2008 SERVER+FileZilla FTP Server,FTP端口:7890 防火墙中已允许FTP Server及端口访问,设置好后,FileZilla FTP Client客户端,被动模式,能连接,但是出错:425 Can't open data connection,不能读出目录列表,服务端也提示:425 Can't open data connectio。 解决方法: 1、首先尝试取消FileZilla FTP Client被动模式,还是本能列表; 2、只能到服务器上找原因了。 FileZilla FTP Server->Edit->Settings->Passive mode settings,指定被动模式使用的端口范围,将Use custom port range前面打开,设置端口范围为2014到2020,然后在Windows防火墙中打开这些端口。 3、在安全组中间开放2014-2020端口 OK,问题解决,客户端连接正常,可以列表。 来源: oschina 链接: https://my.oschina.net/u/617961/blog/308314

FileZilla 425 Can't open data connection

最后都变了- 提交于 2020-03-18 13:26:45
FileZilla 425 Can't open data connection WIN 2008 SERVER+FileZilla FTP Server,FTP端口:2013 防火墙中已允许FTP Server及端口访问,设置好后,FlashFxp客户端,被动模式,能连接,但是出错:425 Can't open data connection,不能读出目录列表,服务端也提示:425 Can't open data connectio。 解决方法: 1、首先尝试取消Flashfpx被动模式,还是本能列表; 2、更换FTP客户端工具为CuteFtp,仍然如此; 3、只能到服务器上找原因了。 FileZilla FTP Server->Edit->Settings->Passive mode settings,指定被动模式使用的端口范围,将Use custom port range前面打开,设置端口范围为2013到2019,然后在Windows防火墙中打开这些端口。 OK,问题解决,客户端连接正常,可以列表。 Keywords:FTP 错误425 Can't open data connection 读取目录 列表失败 FileZilla 端口 ************ 第一步设置添加的目录是主目录 比如:f:\a\b\c 如果一个用户仅只有一个共享的FTP目录,以下步骤可以省略了。

树莓派通过filezilla,samba与PC文件共享

吃可爱长大的小学妹 提交于 2020-03-02 02:15:36
虽然我们可以很方便的通过ssh譬如putty或者vnc连接操控树莓派,但是毕竟树莓派资源没那么高,在上面编程,调试要吃力的多。所以还是想在pc上编程上传到树莓派或者最好,文件共享,可以直接读写共同的文件那就perfect! 一.filezilla 1,安装vsftpd服务器 (约400KB) sudo apt-get install vsftpd 2,启动ftp服务 sudo service vsftpd start 3,编辑vsftdp的配置文件 sudo nano /etc/vsftpd.conf 找到以下行,定义一下 anonymous_enable=NO 表示:不允许匿名访问 local_enable=YES 设定本地用户可以访问。 write_enable=YES 设定可以进行写操作 4, 重启vsftpd服务 sudo service vsftpd restart 5, 测试一下, OK 通过ftp连接树莓派系统, ftp的根目录是/home/pi,即pi用户的HOME目录 可上传或下载文件了 如果安装用过putty,用22端口连就可以了。 二.samba samba 是在Linux和UNIX系统上实现SMB协议的一个免费软件,通过他我们可以实现文件的共享。这是一个相当了不起的服务,功能很强大,值得好好研究。共享文件夹,打印之类都可以。甚至是linux

FileZilla 连接 Linux 失败

六月ゝ 毕业季﹏ 提交于 2020-02-27 13:49:49
使用 FileZilla 连接云服务器或虚拟机中的 Linux 使用 默认 FTP 协议,提示 Status: Connecting to 192.168.223.128:21… Status: Connection attempt failed with “EHOSTUNREACH - No route to host”. Error: Could not connect to server Status: Waiting to retry… Status: Connecting to 192.168.223.128:21… Status: Connection attempt failed with “EHOSTUNREACH - No route to host”. Error: Could not connect to server 连接失败。 这里应选择 SFTP - SSH File Transfer Protocol 。 来源: CSDN 作者: lyfGeek 链接: https://blog.csdn.net/lyfGeek/article/details/104461958