How to Determine if LCD Monitor is Turned on From Linux Command Line

Question

How do you tell if a computer\'s monitor(s) are turned on/off from the command line in Linux? I\'ve traditionally thought of monitors as output-only devices, but I\'ve noticed t

Answer 1

You can get some info using the xrandr command-line utility, if your video driver supports this extension.

Answer 2

The VESA DDC connection is an I2C connection that can be used to query the presence of the monitor.

Linux exposes the I2C device and userland programs can communicate directly with the monitor with code such as that at http://jaffar.cs.msu.su/oleg/ddcci/

Notice this below: Control 0xe1: +/1/1 [SAM: Power control (0 - off/1 - on)]

# ddcci-tool /dev/i2c-2 -e -c -d


ddcci-tool version 0.03

Reading EDID : 0x50@/dev/i2c-2
    Plug and Play ID: SAM00BA
    Input type: Analog

Using ddc/ci : 0x37@/dev/i2c-2

Capabilities:
(type(LCD)vcp(04 05 10 12 60(1 3) B0(1 2) B6 C6 C8 C9 D6(1 4) DC(1 2 3 4) DF))

Controls (valid/current/max):
Control 0x04: +/0/1 [Reset Factory Defaults]
Control 0x05: +/0/1 [SAM: Reset Brightness and Contrast]
Control 0x06: +/0/1 [Reset Factory Geometry]
Control 0x08: +/0/1 [Reset Factory Default Color]
Control 0x0e: +/60/120 [SAM: Image Lock Coarse]
Control 0x10: +/0/100 [Brightness]
Control 0x12: +/50/100 [Contrast]
Control 0x16: +/8/16 [Red Video Gain]
Control 0x18: +/8/16 [Green Video Gain]
Control 0x1a: +/8/16 [Blue Video Gain]
Control 0x1e: +/0/2 [SAM: Auto Size Center]
Control 0x20: +/50/100 [Horizontal Position]
Control 0x30: +/25/54 [Vertical Position]
Control 0x3e: +/39/50 [SAM: Image Lock Fine]
Control 0x60: +/1/3 [Input Source Select]
Control 0x62: +/0/100 [Audio Speaker Volume Adjust]
Control 0x6c: +/140/255 [Red Video Black Level]
Control 0x6e: +/127/255 [Green Video Black Level]
Control 0x70: +/121/255 [Blue Video Black Level]
Control 0xb0: +/0/2 [Settings]
Control 0xb6: +/3/8 [???]
Control 0xc6: +/1/1 [???]
Control 0xc8: +/5/16 [???]
Control 0xc9: +/1/0 [???]
Control 0xca: +/2/2 [On Screen Display]
Control 0xcc: +/2/11 [SAM: On Screen Display Language]
Control 0xd6: +/1/4 [SAM: DPMS control (1 - on/4 - stby)]
Control 0xdc: +/4/4 [SAM: MagicBright (1 - text/2 - internet/3 - entertain/4 - custom)]
Control 0xdf: +/512/0 [VCP Version]
Control 0xe0: +/0/2 [SAM: Color preset (0 - normal/1 - warm/2 - cool)]
Control 0xe1: +/1/1 [SAM: Power control (0 - off/1 - on)]
Control 0xe2: +/0/1 [???]
Control 0xed: +/108/255 [SAM: Red Video Black Level]
Control 0xee: +/101/255 [SAM: Green Video Black Level]
Control 0xef: +/103/255 [SAM: Blue Video Black Level]

An interesting question is whether or not your monitor returns that piece of data, and if not, whether it responds at all if it's currently turned off.

Answer 3

From systembash.com, here is the code taken from the link, in case it will be down some day:

#!/bin/bash
export DISPLAY=:0.0

if [ $# -eq 0 ]; then
  echo usage: $(basename $0) "on|off|status"
  exit 1
fi

if [ $1 = "off" ]; then
  echo -en "Turning monitor off..."
  xset dpms force off
  echo -en "done.\nCheck:"
  xset -q|grep "Monitor is"
elif [ $1 = "on" ]; then
  echo -en "Turning monitor on..."
  xset dpms force on
  echo -en "done.\nCheck:"
  xset -q|grep "Monitor is"
elif [ $1 = "status" ]; then
  xset -q|sed -ne 's/^[ ]*Monitor is //p'
else 
  echo usage: $(basename $0) "on|off|status"
fi

Answer 4

When using xset it always returns xset: unable to open display ""

However, "xset dpms force off" & "xset dpms force off" commands actually turn my monitor off and on. I am using the script outlined here -

http://systembash.com/content/how-to-turn-off-your-monitor-via-command-line-in-ubuntu/

Answer 5

You might want to look at the output of

$ xset -q

I'm not sure if it will work but I think the line " Monitor is (on|off)" should tell you the answer.

Answer 6

xset -qis the way to go for a raspberry pi. A check to see if the reply contains 'Monitor is On' is a great way to use a gpio pin to turn off an LCD Backlight;

if(runOSCommand("xset -q").contains("Monitor is On")){
            System.out.println("Monitor is On");
            if screenLight.isHigh()) {
                screenLight.low();
            }
        }else{
            System.out.println("Monitor is Off");
            if (screenLight.isLow()) {
                screenLight.high();
            }
        }


     public static String runOSCommand(String command){
     String s = null;
     String string = "";
     Process p;
     try {
         p = Runtime.getRuntime().exec(command);
         BufferedReader br = new BufferedReader(
             new InputStreamReader(p.getInputStream()));
         while ((s = br.readLine()) != null){
 //            System.out.println("line: " + s);
             string += s;
         }
         p.waitFor();
//         System.out.println ("exit: " + p.exitValue());
         p.destroy();
     } catch (Exception e) {}
     return string;
 }