TCP - difference between Congestion window and Receive window

Question

I try to understand the difference between Congestion window and Receive window.

As I understand, the receiver window is a buffer where the receiver can get the packets.

Answer 1

To give a short answer: the receive window is managed by the receiver, who sends out window sizes to the sender. The window sizes announce the number of bytes still free in the receiver buffer, i.e. the number of bytes the sender can still send without needing an acknowledgement from the receiver.

The congestion window is a sender imposed window that was implemented to avoid overrunning some routers in the middle of the network path. The sender, with each segment sent, increases the congestion window slightly, i.e. the sender will allow itself more outstanding sent data. But if the sender detects packet loss, it will cut the window in half. The rationale behind this is that the sender assumes that packet loss has occurred because of a buffer overflow somewhere (which is almost always true), so the sender wants to keep less data "in flight" to avoid further packet loss in the future.

For more, start here: http://en.wikipedia.org/wiki/Slow-start

Answer 2

Initially, CongWindow is set equal to one packet. It then sends the first packet into the network and waits for an acknowledgment. If the acknowledgment for this packet arrives before the timer runs out, the sender increases CongWindow by one packet and sends out two packets. Once all of these packets are acknowledged before their timeouts, CongWindow is increased by two—one for each of the acknowledged segments. Now the size of CongWindow is four packets, and thus, the sender transmits four packets. Such an exponential increase continues as long as the size of CongWindow is below the threshold and acknowledgments are received before their corresponding timeouts expire.One important difference is that CongWindow changes in size but receive window size is always constant.