How can I create a pie chart with CSS like the one below?
Oh my! Have you seen Google Chart Tools?
https://google-developers.appspot.com/chart/interactive/docs/gallery/piechart
This is stupid easy to implement, but my problem with it is the "external api" part. If google decides to can this or google goes down, bye bye chart! But as far as beauty and the selection of other charts, google charts is kinda a cool find.
As far as I'm aware this is no (yet) possible with css3. However the new html5 canvas
element provides everything you want. It can easily be accessed and used over javascript. A small tutorial on the basic usage can be found here.
An other question on stackoverflow even was on the same topic. See "HTML5 Canvas pie chart". (There is "Graphing Data in the HTML5 Canvas Element Part IV Simple Pie Charts" in the first answer to a tutorial about pie charts using canvas elements)
I found this solution on CodePen. You can change value in data-attributes which was what I was looking for:
/* make each pie piece a rectangle twice as high as it is wide. move the transform origin to the middle of the left side. Also ensure that overflow is set to hidden. */ .pie { position:absolute; width:100px; height:200px; overflow:hidden; left:150px; -moz-transform-origin:left center; -ms-transform-origin:left center; -o-transform-origin:left center; -webkit-transform-origin:left center; transform-origin:left center; } /* unless the piece represents more than 50% of the whole chart. then make it a square, and ensure the transform origin is back in the center. NOTE: since this is only ever a single piece, you could move this to a piece specific rule and remove the extra class */ .pie.big { width:200px; height:200px; left:50px; -moz-transform-origin:center center; -ms-transform-origin:center center; -o-transform-origin:center center; -webkit-transform-origin:center center; transform-origin:center center; } /* this is the actual visible part of the pie. Give it the same dimensions as the regular piece. Use border radius make it a half circle. move transform origin to the middle of the right side. Push it out to the left of the containing box. */ .pie:BEFORE { content:""; position:absolute; width:100px; height:200px; left:-100px; border-radius:100px 0 0 100px; -moz-transform-origin:right center; -ms-transform-origin:right center; -o-transform-origin:right center; -webkit-transform-origin:right center; transform-origin:right center; } /* if it's part of a big piece, bring it back into the square */ .pie.big:BEFORE { left:0px; } /* big pieces will also need a second semicircle, pointed in the opposite direction to hide the first part behind. */ .pie.big:AFTER { content:""; position:absolute; width:100px; height:200px; left:100px; border-radius:0 100px 100px 0; } /* add colour to each piece. */ .pie:nth-of-type(1):BEFORE, .pie:nth-of-type(1):AFTER { background-color:blue; } .pie:nth-of-type(2):AFTER, .pie:nth-of-type(2):BEFORE { background-color:green; } .pie:nth-of-type(3):AFTER, .pie:nth-of-type(3):BEFORE { background-color:red; } .pie:nth-of-type(4):AFTER, .pie:nth-of-type(4):BEFORE { background-color:orange; } /* now rotate each piece based on their cumulative starting position */ .pie[data-start="30"] { -moz-transform: rotate(30deg); /* Firefox */ -ms-transform: rotate(30deg); /* IE */ -webkit-transform: rotate(30deg); /* Safari and Chrome */ -o-transform: rotate(30deg); /* Opera */ transform:rotate(30deg); } .pie[data-start="60"] { -moz-transform: rotate(60deg); /* Firefox */ -ms-transform: rotate(60deg); /* IE */ -webkit-transform: rotate(60deg); /* Safari and Chrome */ -o-transform: rotate(60deg); /* Opera */ transform:rotate(60deg); } .pie[data-start="100"] { -moz-transform: rotate(100deg); /* Firefox */ -ms-transform: rotate(100deg); /* IE */ -webkit-transform: rotate(100deg); /* Safari and Chrome */ -o-transform: rotate(100deg); /* Opera */ transform:rotate(100deg); } /* and rotate the amount of the pie that's showing. NOTE: add an extra degree to all but the final piece, to fill in unsightly gaps. */ .pie[data-value="30"]:BEFORE { -moz-transform: rotate(31deg); /* Firefox */ -ms-transform: rotate(31deg); /* IE */ -webkit-transform: rotate(31deg); /* Safari and Chrome */ -o-transform: rotate(31deg); /* Opera */ transform:rotate(31deg); } .pie[data-value="40"]:BEFORE { -moz-transform: rotate(41deg); /* Firefox */ -ms-transform: rotate(41deg); /* IE */ -webkit-transform: rotate(41deg); /* Safari and Chrome */ -o-transform: rotate(41deg); /* Opera */ transform:rotate(41deg); } .pie[data-value="260"]:BEFORE { -moz-transform: rotate(260deg); /* Firefox */ -ms-transform: rotate(260deg); /* IE */ -webkit-transform: rotate(260deg); /* Safari and Chrome */ -o-transform: rotate(260deg); /* Opera */ transform:rotate(260deg); } /* NOTE: you could also apply custom classes (i.e. .s0 .v30) but if the CSS3 attr() function proposal ever gets implemented, then all the above custom piece rules could be replaced with the following: .pie[data-start] { transform:rotate(attr(data-start,deg,0); } .pie[data-value]:BEFORE { transform:rotate(attr(data-value,deg,0); } */
<!-- for each piece of the pie chart create one div and give it a data-value attribute that represents the amount (in degrees) that represents its total visible portion, and a data-start attribute that matches the amount rotation for the starting (the cumulative value amount of all the previous pieces). --> <div class="pie" data-start="0" data-value="30"></div> <div class="pie highlight" data-start="30" data-value="30"></div> <div class="pie" data-start="60" data-value="40"></div> <div class="pie big" data-start="100" data-value="260"></div>
Source: https://codepen.io/AtomicNoggin/pen/fEish
Often Creating charts with pure css is not the best way. it's better to use canvas or external libraries.
Here is a pie chart without using external libraries, using html5 canvas (fiddle) :
var canvas = document.getElementById("can");
var ctx = canvas.getContext("2d");
var lastend = 0;
var data = [60,210,90];
var myTotal = 0;
var myColor = ['#afcc4c', '#95b524','#c1dd54'];
var labels = ['B', 'A', 'C'];
for(var e = 0; e < data.length; e++)
{
myTotal += data[e];
}
// make the chart 10 px smaller to fit on canvas
var off = 10
var w = (canvas.width - off) / 2
var h = (canvas.height - off) / 2
for (var i = 0; i < data.length; i++) {
ctx.fillStyle = myColor[i];
ctx.strokeStyle ='white';
ctx.lineWidth = 2;
ctx.beginPath();
ctx.moveTo(w,h);
var len = (data[i]/myTotal) * 2 * Math.PI
var r = h - off / 2
ctx.arc(w , h, r, lastend,lastend + len,false);
ctx.lineTo(w,h);
ctx.fill();
ctx.stroke();
ctx.fillStyle ='white';
ctx.font = "20px Arial";
ctx.textAlign = "center";
ctx.textBaseline = "middle";
var mid = lastend + len / 2
ctx.fillText(labels[i],w + Math.cos(mid) * (r/2) , h + Math.sin(mid) * (r/2));
lastend += Math.PI*2*(data[i]/myTotal);
}
html, body{
background: #c4c9e9
}
<canvas id="can" width="200" height="200" />
fiddle (code is written based on this solution)
But it's better to use libraries for drawing charts. in apex-charts
there is an option called sparkline
, which helps you to remove the extra stuffs and draw a minimal and clean chart.
Here is a clean donut chart using apex-charts
library. (Extra stuffs are removed with sparkline
option):
var options = {
series: [620, 40],
labels: ['Finished', 'Unfinished'],
chart: {
type: 'donut',
sparkline: {
enabled: true,
}
},
plotOptions: {
pie: {
donut: {
labels: {
show: true,
total: {
showAlways: false,
show: true,
label: 'Total'
}
}
}
}
},
};
var chart = new ApexCharts(document.querySelector("#chart"), options);
chart.render();
See it on codepen
I saw some people opting for Google Developers Tool, its very tough and it also uses JS and you only want CSS. So here is the most easy way, Pure CSS, made by using background gradient.
.pie {
width: 400px;
height: 400px;
background-image: conic-gradient(orange 64%, blue 17%, black);
border-radius: 50%
}
<div class="pie"></div>
I find this the easiest CSS-only solution. Somewhat simplified below.
.pieContainer {
height: 150px;
position: relative;
}
.pieBackground {
position: absolute;
width: 150px;
height: 150px;
border-radius: 100%;
box-shadow: 0px 0px 8px rgba(0,0,0,0.5);
}
.pie {
transition: all 1s;
position: absolute;
width: 150px;
height: 150px;
border-radius: 100%;
clip: rect(0px, 75px, 150px, 0px);
}
.hold {
position: absolute;
width: 150px;
height: 150px;
border-radius: 100%;
clip: rect(0px, 150px, 150px, 75px);
}
#pieSlice1 .pie {
background-color: #1b458b;
transform:rotate(30deg);
}
#pieSlice2 {
transform: rotate(30deg);
}
#pieSlice2 .pie {
background-color: #0a0;
transform: rotate(60deg);
}
#pieSlice3 {
transform: rotate(90deg);
}
#pieSlice3 .pie {
background-color: #f80;
transform: rotate(120deg);
}
#pieSlice4 {
transform: rotate(210deg);
}
#pieSlice4 .pie {
background-color: #08f;
transform: rotate(10deg);
}
#pieSlice5 {
transform: rotate(220deg);
}
#pieSlice5 .pie {
background-color: #a04;
transform: rotate(70deg);
}
#pieSlice6 {
transform: rotate(290deg);
}
#pieSlice6 .pie {
background-color: #ffd700;
transform: rotate(70deg);
}
.innerCircle {
position: absolute;
width: 120px;
height: 120px;
background-color: #444;
border-radius: 100%;
top: 15px;
left: 15px;
box-shadow: 0px 0px 8px rgba(0,0,0,0.5) inset;
color: white;
}
.innerCircle .content {
position: absolute;
display: block;
width: 120px;
top: 30px;
left: 0;
text-align: center;
font-size: 14px;
}
<div class="pieContainer">
<div class="pieBackground"></div>
<div id="pieSlice1" class="hold"><div class="pie"></div></div>
<div id="pieSlice2" class="hold"><div class="pie"></div></div>
<div id="pieSlice3" class="hold"><div class="pie"></div></div>
<div id="pieSlice4" class="hold"><div class="pie"></div></div>
<div id="pieSlice5" class="hold"><div class="pie"></div></div>
<div id="pieSlice6" class="hold"><div class="pie"></div></div>
<div class="innerCircle"><div class="content"><b>Data</b><br>from 16<sup>th</sup> April, 2014</div></div>
</div>