VirtualBox: extend partition

Question

I have virtualbox-4.1.0 with centos-5.6 installed in. Now I would like to extend the VM image, which I previously allocated for virtual machine installation, it was 8Gb, that\'s

Answer 1

It can be done with 3 steps :

• cloning your VMDK to VDI format using VBoxManage
• resize the disk to create free space using VBoxManage
• modify the filesystem to allocate free space to your drive, using GParted

Don't forget the last part, otherwise, you will have unallocated free space and your disk will still appear as full.

I wrote a tutorial here to resize your VM Disk

Answer 2

It can be done in 4 steps :

1. Clone your VMDK to VDI format with VBoxManage Tool.
2. Resize the disk to create free space with VBoxManage Tool.
3. Modify the filesystem to allocate free space for your drive with GParted.
4. Add created disk space to Linux FileSystem.

---

The detailed steps are below (tested with "Virtual Machine CentOS 6.4" and "VirtualBox 4.2.18");

1. Observe disk format of the virtualbox file, if it is not *.vdi, convert disk format from *.wmdk to *.vdi. Open windows terminal:
   $ VBoxManage clonehd --format VDI "path_of_wmdk_file" "path_of_vdi_file"

2. Resize disk size of vdi file. Open windows terminal. For example to do disk size ~500 GB => 512000;
   $ VBoxManage modifymedium "path_of_vdi_file" --resize 512000

3. Choose *.vdi file instead of *.wmdk file as disk
   Virtual Machine -> Settings -> Storage -> Controller : SATA (Right Click on *.wmdk file) -> Remove Attachment -> Add HardDisk and choose newly created *.vdi file

4. Download "gparted-live-x.xx.x-x-ixxx.iso" file from http://gparted.sourceforge.net/download.php. Mount this iso file as CD.
   Virtual Machine -> Settings -> Storage -> Controller IDE (Right Click) -> Add CD/DVD -> Select gparted-live-x.xx.x-x-ixxx.iso file

5. Run virtual machine, Virtual Machine will boot from this CD. Choose default values with pressing "Enter", "Enter" ... until Gpart ISO GUI starts. Select tool gpart program and start.

6. Extend disk size as below;

   • Right click on partitions and if "possible" click on "Disable Active Partion".
   • Extend Partition as much as possible from GUI (for this case 500GB).
   • Right click the partition which is disabled and select "Enable Active Partion".
   • Apply and wait until the operations finished.
   • Shut down virtual machine.
   • Unmount gparted-live-x.xx.x-x-ixxx.iso.
     Virtual Machine -> Settings -> Storage-> Controller IDE (Right Click on gparted-live-x.xx.x-x-ixxx.iso) -> Remove Attachement
   • Start the virtual machine.
     
     

7. Open linux terminal and login as root. Run commands below;

 lvm vgdisplay
       => Free  PE / Size       122880 / 480.00 GiB

 lvm lvdisplay /dev/VolGroup/lv_root
       => Current LE             3978

• Calculate the sum of the values above. In this case : 122880 + 3978 = 126858 <- will be used in the next command

 lvm lvresize -l 126858 /dev/VolGroup/lv_root

 resize2fs  /dev/VolGroup/lv_root   

 lsblk
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    NAME                        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
    sr0                          11:0    1  1024M  0 rom  
    sda                           8:0    0   500G  0 disk 
        +¦sda1                        8:1    0   500M  0 part /boot
        L¦sda2                        8:2    0 499.5G  0 part 
            +¦VolGroup-lv_root (dm-0) 253:0    0   480G  0 lvm  /
            L¦VolGroup-lv_swap (dm-1) 253:1    0     4G  0 lvm  [SWAP]
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

• Check whether the filesystem extended or not with creating a huge file:

 fallocate -l 480G /test_file

• Remove the test file of course:

 rm -rif /test_file

Answer 3

At some point the VBoxManage utility changed the syntax a little bit. It's worth noting that this doesn't work on all vm types so beware if you have a *.vmdk. An example command to change your HD to 40GB is:

$ VBoxManage modifyhd MyVirtualImage --resize 40960

For reference I am on VirtualBox 4.2.1, Mac 10.8.2

Answer 4

Search for CloneVDI tool on the Oracle VirtualBox forums. It worked for me and is a much easier GUI based program for anyone nervous at the command line. Also allows conversion from fixed to dynamic mode which VBoxManage.exe doesn't support (yet).

https://forums.virtualbox.org/viewtopic.php?f=6&t=22422

Answer 5

I found this nugget at the link following. I worked perfect for me and only took 5 seconds.

As of VirtualBox 4 they added support for expansion.

VBoxManage modifyhd filename.vdi --resize 46080

That will resize a virtual disk image to 45GB.

https://superuser.com/questions/172651/increasing-disk-space-on-virtualbox

Answer 6

I'm using a CentOS7 virtualbox, and I finally enlarged my partition /dev/mapper/centos-root - gparted doesn't work for me because I do not have a desktop on CentOS7 virtualbox.

1. Power off your CentOS virtual machine
2. Go into the directory of your *.vdi image. If you don't know where it is, look at your Virtualbox Manager GUI virtualbox -> settings -> storage -> *.vdi -> location e.g. mine is located under ~/VirtualBox VMs/CentOS7/CentOS.vdi

3. Back up your image just in case anything goes wrong

   $ cp CentOS7.vdi CentOS7.backup.vdi

4. Resize your virtual storage size, e.g. 200 GB

   $ VBoxManage modifyhd CentOS7.vdi --resize 204800

5. Power on your CentOS virtual machine, issue

   $ sudo fdisk -l

   Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *        2048     1026047      512000   83  Linux
    /dev/sda2         1026048   209715199   104344576   8e  Linux LVM

6. Use fdisk utility to delete/create partitions

   $ sudo fdisk /dev/sda

7. You are in the fdisk utility interactive mode, issue following commands: (mostly just follow the default recommendation)

   d - delete a partition

   2 - select a partition to delete (/dev/sda2 here)

   n - create a new partition

   p - make it a primary partition

   2 - make it on the same partition number as we deleted

   <return> - set the starting block (by default)

   <return> - set end ending block (by default)

   w - write the partition and leave the fdisk interactive mode

8. Reboot your CentOS machine

   $ sudo reboot

9. Resize the physical volume and verify the new size

   $ sudo pvresize /dev/sda2

   $ sudo pvscan

10. Take a look at your logical mapping volume to see what volume you want to enlarge, in my case, /dev/mapper/centos-root

11. Resize the file system by adding -r option, it will take care of resizing for you

    $lvextend -r -l +100%FREE /dev/mapper/centos-root

12. Resize the file system:

    $resize2fs /dev/mapper/fedora-root

    For CentOS 7: $xfs_growfs /dev/mapper/fedora-root

13. Last check:

    $df -h.

Reference:https://blog.jyore.com/2013/06/virtualbox-increase-size-of-rhelfedoracentosscientificos-guest-file-system/#comment-2879