How do I find next bit to change in a Gray code in constant time?
I have a small 8-bit processor which has a N-to-M decoder on some output lines - eg, for the 5 to 32 bit case, I write 00101 and bit 5 changes state. The only interface to
-
For Binary Reflective Gray Code, see this answer for an efficient way to calculate the code N.
XOR with the previous code to get a value where only the bit to change is set.
Then you can use this Bit Twiddling Hack (the case where "v is a power of 2") to find the bit index with only 3 operations and a 32-entry table.The pseudo-code is something like this:
n = lastCode = 0 increment: n+=1 newCode = GrayCode(n) delta = newCode XOR oldCode bitToToggle = BitIndex(delta) old code = new code GOTO increment;讨论(0) -
LowestBitSet(A ^ (A+1))is always 0, unless you work for IBM. I think you meanHighestBitSet(), which is roughly the same aslog_2().The bit-twiddling hack immediately preceeding the one linked by AShelly will be much more feasible on an 8-bit micro.
This should make your original algorithm fairly practical, generating
{ 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, ... }.As for the possibility of changing to a different sequence which would also generate a Gray code, for the purpose of making it easier to compute, that's very interesting but I haven't come up with anything.
讨论(0) -
"Algorithm L" on page 10 of Knuth, Donald E. "Generating all n-tuples." The Art of Computer Programming, Volume 4A: Enumeration and Backtracking, pre-fascicle 2a, October 15, 2004 seems ideal. Step L4 would be "change_state(j)" for your device.
讨论(0) -
/*
As previously posted this answer, https://stackoverflow.com/questions/4648716#42865348 using a Johnson counter Gray code, is very simple:Number_of_Bit_To_Flip = ++Number_of_Bit_To_Flip % Total_Number_of_Counter_Bitswhich is executed on every event occurrence.
Otherwise, using a Binary Reflected Gray Code and a 4 byte base 2 counter
n, ...Method 1 - using a table */
static const byte twos[ ] = { // note pattern V V V V V V 0,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 6, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 7, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 6, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 8, }; // operation count worst case 3 logic 4 index 1 addition // for 7/8 of calls 2 3 1 byte bit_change(byte ctr[4]) { return (byte[]){ (byte[]){ 16 + twos[ctr[2]] , (byte[]){24 + twos[ctr[3]] , 31 } [ !ctr[3] ] } [ !ctr[2] ] , (byte[]){ 0 + twos[ctr[0]] , 8 + twos[ctr[1]] } [ !ctr[0] ] } [ctr[0] || ctr[1]]; // -------- NB. orphaned, included for pedagogic purposes -------- return (byte[]){ 0 + twos[ctr[0]] , // this IS totally time constant 8 + twos[ctr[1]] , // NB. 31 + time "constantator" 16 + twos[ctr[2]] , // case ctr[i]==0 for all i 24 + twos[ctr[3]] , 31 + twos[ctr[0]] } [ !ctr[0]*( 1+ !ctr[1]*( 1+ !ctr[2]*( 1+ !ctr[3] ) ) ) ]; }/Method 2 - no tables */
byte bin2toN(byte b){ return (byte []) {(byte []) {(byte []) {7,6} [b < 128 ] , (byte []) {5,4} [b < 32 ] } [b < 64 ] , (byte []) {(byte []) {3,2} [b < 8 ] , (byte []) {1,0} [b < 2 ] } [b < 4 ] } [b < 16 ] ; } byte flip_bit(byte n[4]){ return (byte []){ (byte []){ 16 + bin2toN( n[2] & -n[2] ) , (byte []){ 24 + bin2toN( n[3] & -n[3] ), 31 } [ !n[3] ] } [ !n[2] ] , (byte []){ 0 + bin2toN( n[0] & -n[0] ) , 8 + bin2toN( n[1] & -n[1] ) } [ !n[0] ] } [ n[0] || n[1] ] ; // - - - - - - - - - - - - ORPHANED, fails on zero - - - - - - - - - - - - return // included for pedagogic purposes (byte []) { (byte []) { bin2toN( n[2] & -n[2] ) + 16 , bin2toN( n[3] & -n[3] ) + 24 } [ !n[2] ] , (byte []) { bin2toN( n[0] & -n[0] ) + 0 , bin2toN( n[1] & -n[1] ) + 8 } [ !n[0] ] } [ n[0] || n[1] ] ; }/*
Bit Bunnies and Cargo Cult Coders have no need to read further.The efficiency of execution of the above code depends on the fact that
n[0], n[1], ...are computed at compile time as fixed addresses which is quite conventional. Also, using a call-by-need optimizing compiler will expedite the array contents so only one indexed value needs to be calculated. This compiler sophistication is likely missing but it is easy to manually assemble the raw machine code to do it (basically a switch, computed goto, etc. ).Analysis of the above algorithms, using the orphaned code, shows that every function call will execute exactly the same instruction sequence, optimized or not.
In both methods, the non-orphaned returns require handling the case when there is counter roll over on 0, consequently using extra index and logical (
!) operations. This extra happens for 1/2 of 1/2 of 1/2 or 1/8 of the total counts, and for one count in this 1/8 there is nothing to do but return 31.The first method requires 2 logical operations (
! ||), 1 addition and 3 index calculations for 7/8 of the total counts. On a single count of zero, 3 logical and 3 index operations are needed and the rest of the other 1/8 need 3 logical, 1 addition and 4 index operations.The final code on execution of method 2 (compiled optimally), for 7/8 of the calculations, uses 7 logical operations (
|| & ! < -the last is two's complement), 1 arithmetic (+) and 5 calculated index operations. The other 1/8, but one instance, need 8 logical, 1 addition and 6 calculated index operations.Unfortunately, no flash of divine inspiration manifested any cargo code. This is an abridged tale of how this composition's authorship happened.
How this was done involved a crucial preliminary investigation as documented: https://stackoverflow.com/a/42846062. Then code was derived using a succesive refinement process commencing with an assesment of the algorithms in this post.
Specifically, this answer: https://stackoverflow.com/a/4657711 .This algorithm's time variant execution from the loop overhead will be poignently and prominently accentuated by reducing the return calculation to a single addition and two index operations.
*/
byte bit_change(byte ctr[4]) { static byte ones[256]; // this sparse RA is precomputed once for (byte i = 255; --i; ones[i]=0) ; ones[ 0] = ones[ 1] = 0; ones[ 3] = 1; ones[ 7] = 2; ones[15] = 3; ones[31] = 4; ones[63] = 5; ones[127] = 6; ones[255] = 7; // { ie. this very sparse array is completely adequate for original code // 0,0, ,1, , , ,2, , , , , , , ,3, , , , , , , , , , , , , , , ,4, // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,5, // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,6, // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , // , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,7, } // 1/2 of count uses 2 index 2 conditionals 0 increment 1 logic 2 +/- 1 x // 1/4 3 4 1 1 2 1 // 1/8 4 6 2 1 2 1 // 1/16 5 8 3 1 2 1 // average 14 = 3.5 5 1.5 1 2 1 unsigned char i; for (i = 0; i < 4; i++) { // original code unsigned char x = counter[i]; // "works" but if (x) { // still fails on x ^= x - 1; // count 0 rollover return 8 * i + ones[x]; } } // ............................. refinement ............................. byte x; for (byte i = 0; i < 4; i++) // if (x = counter[i]) return i<<3 + ones[x ^ x - 1]; }/-------------------------------------------------------------- --------------------------------/
// for (byte i = 255; --i; twos[i] == ones[i ^ i-1] ) ; // ones[ ] uses only 9 of 1/4K inefficient, twos[ ] uses all 1/4K static const byte twos[ ] = { 0,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 6, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 7, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 6, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5, 0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0, 8, }; // fix count 0 rollover failure, make time absolutely constant as per OP byte f0(byte ctr[4]) { byte ansr=31; for (byte i = 0; i < 4; i++) if (ctr[i]) { ansr=(byte[]){0,8,16,24}[i] + twos[ctr[i]]; // i<<3 faster? break; } for (; i < 4; i++) if (ctr[i]) ; return ansr; } //.................................................. // loop ops (average): 1.5 ++ 2.5 [] 5 if // result calculation: 1 + 2 [] significant loop overhead byte f1(byte counter[4]) { for (byte i = 0; i < 4; i++) if (counter[i]) return (byte[]){ 0 + twos[counter[0]], 8 + twos[counter[1]], 16 + twos[counter[2]], 24 + twos[counter[3]] } [i]; return 31; } //.................................................. // 5 +/++ 6 [] 10 if byte f2(byte counter[4]){ byte i, ansr=31; for (i = 0; i < 4; i++) { // definite loop overhead if (counter[i]) { ansr= (byte[]){ 0 + twos[counter[0]], 8 + twos[counter[1]], 16 + twos[counter[2]], 24 + twos[counter[3]] } [i]; break; } } for (; i < 4; i++) if (counter[i]); // time "constantator" return ansr; } //.................................................. // 4 + 4 ! 3 x 1 [] 1 computed goto/switch byte f3(byte counter[4]){ // default: time "constantator" switch (!counter[0]*( 1 + // counter[0]==0 !! !counter[1]*( 1 + !counter[2]*( 1 + !counter[3] ) ) ) ){ case 0: return 0 + twos[ counter[0] ] ; case 1: return 8 + twos[ counter[1] ] ; case 2: return 16 + twos[ counter[2] ] ; case 3: return 24 + twos[ counter[3] ] ; default: return 31 + twos[ counter[0] ] ; } }/*
There is a comparable chronology for method 2.
This sequence has been radically attenuated and abbreviated to an intermediate example:
Inadvertently, the code posted in https://stackoverflow.com/a/42865348 was not the exclusively byte sized one as intended. The intended code is in this post. */
byte log2toN(byte b){ return ( b & 0xF0 ? 4:0 ) + // 4444.... ( b & 0xCC ? 2:0 ) + // 22..22.. ( b & 0xAA ? 1:0 ) ; // 1.1.1.1. } // . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . byte BRGC(byte n){ return n ^ n>>1; } byte bitNbyte(byte n){ return log2toN( BRGC(n) ^ BRGC(n+1) ); } byte bit2flip(byte n[4]){ boolean n3=n[3]<255, n2=n[2]<255, n1=n[1]<255, n0=n[0]<255; return n0*( 0 + bitNbyte( n[0] ) ) + !n0*( n1*( 8 + bitNbyte( n[1] ) ) + !n1*( n2*(16 + bitNbyte( n[2] ) ) + !n2*( n3*(24 + bitNbyte( n[3] ) ) + !n3*( 0 ) ) ) ); } // . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . byte bit_flip(byte n[4]){ //switch( ( !!n[0] << 3 ) | ( !!n[1] << 2 ) | ( !!n[2] << 1 ) | !!n[3] ) switch( 15 ^ ( !n[0] << 3 ) ^ ( !n[1] << 2 ) ^ ( !n[2] << 1 ) ^ !n[3] ) { case 15: case 14: case 13: case 12: case 11: case 10: case 9: case 8: return 0 + log2toN( n[0] & -n[0] ); case 7: case 6: case 5: case 4: return 8 + log2toN( n[1] & -n[1] ); case 3: case 2: return 16 + log2toN( n[2] & -n[2] ); case 1: return 24 + log2toN( n[3] & -n[3] ); default: return 31 + log2toN( n[0] & -n[0] ); } }/*
Rhetorically, the answer to How do I find ... can only be answered explicitly in the personal sense (see this answer: https://stackoverflow.com/a/42846062) as it is not possible to speak for other individuals' cognitive abilities.The content of https://stackoverflow.com/a/42846062 is crucial for background information and reflects the very personal pedantic mechanism required for the mental gymnastics to solve this problem. Undoubtedly, the milieu and plethora of material is daunting but this is exactly the personal approach taken in garnering sufficient insight, repertoire, anecdotal precedents, etc. to extrapolate and interpolate an answer to answer specifically, what program meets the criteria, exactly. Further, it is this very "chase" that excites and motivates the (perhaps pathological) psyche to invest time and effort to satiate curiosity with an inquisitive quest. */
void setup() { } void loop() { }讨论(0) -
/*
Can not edit previous answer, as per commentary, so posting rewrite:Too impatient?
For immediate gratification and minimal edification, cut to the chase and chase this link where only the final result has been posted:
C code for generating next bit to flip in a gray codeREFs:
C code for generating next bit to flip in a gray code
How do I find next bit to change in a Gray code in constant time?Deriving nth Gray code from the (n-1)th Gray Code
Gray code increment function
Efficient way to iterate over Gray code change positions
Generating gray codes.https://en.wikipedia.org/wiki/The_C_Programming_Language https://en.wikipedia.org/wiki/The_Elements_of_Programming_StyleWARNING:
For purposes of coding expediency and demonstrable functional execution, some non-trivial programming techniques have been used. However, this is hopefully mitigated for the exposition of the concept rudiments by presenting the essence as trivially and minimally as possible with highlighting by / / / /. Careful reading, study and experiment are encouraged to avoid cargo cult coding, oversights, and perpetrating mistakes.This answer is manifested in the Arduino IDE ESP8266 core coding environment.
The algorithm as posited by the OP is not exactly correct (as if this;).
The Johnson Code
-------------------------Since the actual Gray coding is irrelevant, using a Johnson counter's Gray code is an exceptionally easy and poignant way to cognitively and computationally count both the bit to change and the next code.
Note that the Johnson counter Gray code density is linear and not logarithmic.
With 32 bits in 4 bytes, the sequence can count from 0 to 63 before resetting.It is necessary to verify carefully the functional suitability of the code that follows, modifying it as appropriate.
HINT: Verification is a MUST, especially for the "binary reflected" Gray code (BRGC)!
/./ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /./
byte bitCtr=-1; // for 4 x 8 bits use 32 instead of 5 byte JohnsonCode(){ static byte GCbits = 0; return GCbits ^= 1u << ( bitCtr = ++bitCtr %5 ); }/./ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /./
void testJohnson(){ Serial.println("\n\tJohnson counter\t Bit\n\t Gray code:\t Flipped:"); for( int intifiny=31; --intifiny; ) Serial.println( "\t " + cut( 5, "....." + // s.replace(...) returns zip, // so VVV use lambda function invoke via VVV // _____________________ V ____________________ ______________ V _____________ [](String s){ s.replace("0","."); return s; } ( String( JohnsonCode(), BIN ) ) ) + "\t " + bitCtr ); }/*
Outputs:Johnson counter Bit Gray code: Flipped: ....1 0 ...11 1 ..111 2 .1111 3 11111 4 1111. 0 111.. 1 11... 2 1.... 3 ..... 4 ....1 0 ...11 1 etc.Some background material on the Binary Reflected Gray Code (BRGC)
-----------------------------------------------------------------------------------------------
CONVERSIONS:
---------------------
REF: Code Golf: Gray Code// These javascript scURIples may run by copy and paste to the URI browser bar. // convert base 2 to BRGC: n^=n>>1 // get base 2 from BRGC: n^=n>>1 n^=n>>2 n^=n>>4 ... javascript: n=16; s="<pre>"; function f(i,n){ return i?f(i>>1,n^n>>i):n} while(n--) s += f(4,n^n>>1) .toString(2)+"\n"; javascript: n=16; s="<pre>"; while(n--) s += (n^n>>1) .toString(2)+"\n"; javascript: c=0; n=16; s="<pre>"; while(n--) s +=(c^(c=n^n>>1)).toString(2)+"\n";COUNTING:
-----------------
The following (as per ref. above) arbitrarily gets both the preceding and following BRGC's for a code.
NB! The order ofn1andn2is parity determined and non-corresponding otherwise. The ordering might ben1, gray, n2OR it could ben2, gray, n1, so,eo(parity) discriminates.unsigned n1 = gray ^ 1; unsigned n2 = gray ^ ((gray & -gray) << 1); gray = eo=!eo ? n1 : n2; // eo (or parity) gets Every Otherie.
bitToFlip = eo=!eo ? 1 : (gray & -gray) << 1; gray ^= bitToFlip;hence
gray ^= eo=!eo ? 1 : (gray & -gray) << 1;/./ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /./
byte tooGray( byte (*f)(byte) ){ static byte BRGC=0, base2=0; static boolean eo=false; return (*f)( BRGC ^= (eo=!eo) ? (BRGC & -BRGC) <<1 : 1 ) & 0x3 | // count ^---------------------------------------^ in raw BRGC (*f)( base2 ^ base2++ >>1 ) & 0xC ; } // count in base 2 ^---------------------^ and convert to BRGC/./ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /.
REF: The neighbors in Gray code
http://www.graphics.stanford.edu/~seander/bithacks.html http://www.inwap.com/pdp10/hbaker/hakmem/hakmem.html https://en.wikipedia.org/wiki/Ring_counter#Johnson_counterOh yeah, ... count set bits in
A ^ A+1which will have a bit pattern like 000...0111..1 Prove.How to get bit position for a power of 2 - the
nparameters must have a single bit set.Method 1
*/byte naive1(byte n){ return bitNumber(n-1); } byte bitNumber(byte m){ // can use A ^ A+1 ... BUT >> 1 first OR -1 after return ( m & 1 ?1:0 ) + ( m & 2 ?1:0 ) + ( m & 4 ?1:0 ) + ( m & 8 ?1:0 ) + ( m & 16 ?1:0 ) + ( m & 32 ?1:0 ) + ( m & 64 ?1:0 ) + ( m & 128 ?1:0 );} // 256 512 1024 2048 .../*
Method 2
*/byte naively2(byte n){ return ( n & 1 ?0:0 ) + ( n & 2 ?1:0 ) + ( n & 4 ?2:0 ) + ( n & 8 ?3:0 ) + ( n & 16 ?4:0 ) + ( n & 32 ?5:0 ) + ( n & 64 ?6:0 ) + ( n & 128 ?7:0 );}/*
Method 3
*/byte powerOf2(byte n){ return ( n & 0xF0 ? 4:0 ) + // 4444.... ( n & 0xCC ? 2:0 ) + // 22..22.. ( n & 0xAA ? 1:0 ) ; } // 1.1.1.1./*
Method 4
*/// and the penultimate, // http://www.graphics.stanford.edu/~seander/bithacks.html#IntegerLogDeBruijn byte fastNof2up(byte b){ return (byte []){0,1,6,2,7,5,4,3}[(byte)(b*0x1Du)>>5];} // 7,0,5,1,6,4,3,2 0x3Au // b==2^N 0,1,2,4,7,3,6,5 0x17u // 7,0,1,3,6,2,5,4 0x2Eu // |------| |------| // .....00011101 ........1101.... // ......0011101. .........101..... // .......011101.. ..........01...... // ........11101... ...........1....... // |------| |------|/*
Method 5
Details are at the end.
Can a judicious choice of constants reduce this to only 2 operations?
*/byte log2toN(byte b){ return 7 - (byte) ( 0x10310200A0018380uLL >> ( (byte)(0x1D*b) >>2 ) ) ; }/*
Testing Environment
*/void setup() {Serial.begin(115200); testJohnson(); test(); fastLog2upN(0); } void loop() { delay(250); // return ; [](byte GrayX2){ Serial.print( GrayX2 ^ 0x0F ? "" : baq(GrayX2)+"\n"); analogWrite( D5, (int []) { 0, 1200, 0, 300 } [ GrayX2 & 0x3 ] ); analogWrite( D6, (int []) { 0, 0, 1200, 300 } [ GrayX2 & 0x3 ] ); analogWrite( D7, (int []) { 0, 1200, 0, 300 } [ GrayX2 >> 2 & 0x3 ] ); analogWrite( D8, (int []) { 0, 0, 1200, 300 } [ GrayX2 >> 2 & 0x3 ] ); } // ( tooGray( b ) ); ( tooGray( [](byte n) { return n; } ) ); }/======================================================================
Caveat:
-----------
The OP's algorithm is not effective.Keep binary counter A Find B as A XOR (A+1) Bit to change is LowestBitSet in Bas seen when coded as:
*/void test(){ static byte C=0, bits=0; Serial.println((String)"\n "+(3^2+1)+" "+(3^(2+1))+" "+((3^2)+1) ); Serial.println( "\n manifested by an actual " "\n obstinate perverse bit to " "\n psyche flip check" "\n A A+1 A ^ A+1 B^=A^A+1 (A^A+1)+1>>1 "); for(int intifiny=32, A=0; intifiny--; A=++A%15) // sort a go infinite ... an epiphany! Serial.println( (String) pad( b( bits ^= b( b(A) ^ b(A+1) ) ) ) +" "+ baq( (A^A+1)+1>>1 ) +" "+ baq( C^=(A^A+1)+1>>1 ) +" " // "| "+ pad(A)+" "+ pad(bits) ); Serial.println( " | " "\n BITS: " "\n Bit Isn't This Silly " "\n Bit Is Totally Set (A ^ A+1) & -(A ^ A+1) == 1 ALWAYS " "\n\n non-binary Gray codes? " "\n {-1,0,1} balanced ternary, factoroid (factoradic), {0,-1} negated binary \n"); } // https://en.wikipedia.org/wiki/Steinhaus%E2%80%93Johnson%E2%80%93Trotter_algorithm // some service routines ... String cut(byte sz, String str) { return str.substring(str.length()-sz) ; } String pad(byte n ) { return cut( 4, " " + String(n,DEC) ); } String baq(byte n ) { return cut( 9, "........." + String(n,BIN) ); } void q ( ) { /* PDQ QED PQ's */ } void p ( String str) { Serial.print( " " + str + " " ) ; } byte d (byte n ) { p(pad(n)); return n ; } byte b (byte n ) { p(baq(n)); return n ; }/*
Sample output:flip bit "correctly" confirm? A A+1 A ^ A+1 B^=A^A+1 (A^A+1)+1>>1 ........0 ........1 ........1 ........1 1 ........1 ........1 | 0 1 ........1 .......10 .......11 .......10 2 .......10 .......11 | 1 2 .......10 .......11 ........1 .......11 3 ........1 .......10 | 2 3 .......11 ......100 ......111 ......100 4 ......100 ......110 | 3 4 ......100 ......101 ........1 ......101 5 ........1 ......111 | 4 5 ......101 ......110 .......11 ......110 6 .......10 ......101 | 5 6 ......110 ......111 ........1 ......111 7 ........1 ......100 | 6 7 ......111 .....1000 .....1111 .....1000 8 .....1000 .....1100 | 7 8 .....1000 .....1001 ........1 .....1001 9 ........1 .....1101 | 8 9 .....1001 .....1010 .......11 .....1010 10 .......10 .....1111 | 9 10 .....1010 .....1011 ........1 .....1011 11 ........1 .....1110 | 10 11 etc. | BITS: Bit Isn't This Silly Houston; We have a (an-other) problem Bit Is Totally Set (A ^ A+1) & -(A ^ A+1) == 1 ALWAYSCurious?
-----------
The following code is a very very crude method that can expedite a hunt for suitable bit packed counting candidates to computelog 2^n(in base 2 ie.n).
*/byte fastLog2upN(byte b){ // b==2^N for(long long int i=8, b=1; --i; ) Serial.println((int)(0x0706050403020100uLL / (b*=0x100)),HEX) ; for( int i=9, b=1; --i;b*=2) // 3A = 1D*2 Serial.println( (String) ( (b>>4 | b>>2 | b>>1) & 7 ) + " \t" + ( (0xB8*b) >>8 & 7 ) + " \t" + ( (0xB8*b) >>7 & 7 ) + " \t" + ( (0x1D*b) >>4 & 7 ) + " \t" + ( (0x0D*b) >>3 & 7 ) + " |\t" + ( ((byte)(0x9E*b) >>2 ) ) + " \t" + (byte) ( 0x07070301C0038007uLL >> ((byte)(0x9E*b) >>2 ) ) + " \t" + ( ((byte)(0x1E*b) >>2 ) ) + " \t" + (byte) ( 0x7070001C0038307uLL >> ((byte)(0x1E*b) >>2 ) ) + " \t" + ( ((byte)(0x5E*b) >>2 ) ) + " \t" + (byte) ( 0x703800183838307uLL >> ((byte)(0x5E*b) >>2 ) ) + " \t| " + ( ((byte)(0x3A*b))>>5 ) + " \t" + ( ((byte)(0x3A*b))>>4 ) + " \t" + ( ((byte)(0x3A*b))>>3 ) + " \t" + ( ((byte)(0x3A*b))>>2 ) + " \t" + ( ((byte)(0x3A*b))>>1 ) + " \t" + ( ((byte)(0x3A*b))>>0 ) + " \t| " + (byte) ( 0x0203040601050007uLL >> 8*((byte)(0x3A*b) >>5 ) ) + " \t" + String((byte) ( 0x0706050403020100uLL >> ((byte)(0x3A*b) >>4 ) ),HEX ) + "\t" + String((byte) ( 0x0020010307uLL >> ((byte)(0x3A*b) >>3 ) ),HEX ) + "\t" + String((byte) ( 0x10300200A0018007uLL >> ((byte)(0x3A*b) >>2 ) ),HEX ) + "\t|" + ( ((byte)(0x1D*b))>>2 ) + " \t" + (byte) ( 0x10710700E0018380uLL >> ((byte)(0x1D*b) >>2 ) ) + " \t" + (byte) ( 0x10310200A0018380uLL >> ((byte)(0x1D*b) >>2 ) ) + " \t| " + "") ; }/*
javascript: x=6; y=4; n=511; ra=[]; s="<pre>x"; while(n--)for(i=5;i;i=i==3?2:--i){ j=0; for(b=1;b<129;b*=2) ra[j++]=((n*b)&0xFF)>>i; ra.sort(function(a, b){return a-b}); if ( tf=ra[--j] < 64 && ra[1]>ra[0]+x ) while( --j && ( tf = (ra[j]>ra[j-1]+x) || ( ra[j]<ra[j-1]+y && ra[j+1]>ra[j]+x) ) ); if(tf) s+="\n "+n.toString(16)+" >> "+i+" \t"+ra.join(" "); }; s; // many >>2 's to do: sledge hammer creation of acceptable bit pattern solutions // only want btf's - Bits That Fit (in 8 bytes): (tf=ra[j-1] < 64) // program proximity control so no BS (Brain Strain!): tf = (ra[j]<ra[j-1]+x) || (ra[j]<ra[j-2]+y) // for debug: s+="\n "+n.toString(16)+" >> "+i; // for debug: s+="\n" +tf+"\t"+ra[j]+"\t"+ra[j-1]+"\t"+ra[j-2];*/
讨论(0) -
The algorithm posited by the OP does not generate any Gray code.
The algorithm in this answer: https://stackoverflow.com/a/4657711/7728918 is not constant time, since the conditional test
if (x)can vary from 1 to 4 executions depending on the value ofcounter[i]. This changes the amount of time that is required to calculate bit numbers. There will be 4 different possible execution times that any single calculation may have.See (cargo cult coders excepted) the reference for the rationale of the following that meets this constant time requirement (no lights, no car, not a single luxury ... not even a "table"):
byte log2toN(byte b){ return 7 - (byte) ( 0x10310200A0018380uLL >> ( (byte)(0x1D*b) >>2 ) ) ; } byte BRGC(byte n){ return n ^ n>>1; } byte bit2flip(byte n){ return log2toN( BRGC(n) ^ BRGC(n+1) ); }However, there is a much better, more succint and expedient method to meet the OP's criteria.
For cargo cult coding purposes the following conveniently satisfies the OP's conditions minimally (maximally? ;).
The bit number to change is found each time with only two operations: a modulus (which if done modulo
2^ncould be as simple as a bit-wise&operation withn-1bits ie. the constant2^n - 1) and an increment.The actual Johnson Gray code (JGC) sequence is generated incrementally by
XORing the previous code with the desired bit, selected by a left shift of 1 to the bit number position. This calculation is NOT needed as per the OP's requirements.The Johnson Code
-------------------------The actual Gray coding is irrelevant, so using a Johnson counter's Gray code is exceptionally trivial.
Note that the Johnson Gray code (JGC) density is linear and not logarithmic like base 2 or binary reflected Gray code (BRGC).
With 32 bits in 4 bytes, the sequence can count from 0 to 63 before resetting.
/./ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /.
byte bitCtr=-1; // for 4 x 8 bits use 32 instead of 5 int JohnsonCode(){ static byte GCbits = 0; return GCbits ^= 1u << ( bitCtr = ++bitCtr %5 ); }/./ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /.
Test output:
Johnson counter Bit Gray code: Flipped: ....1 0 ...11 1 ..111 2 .1111 3 11111 4 1111. 0 111.. 1 11... 2 1.... 3 ..... 4 ....1 0 ...11 1 etc.partially generated with this code:
void testJohnson(){ Serial.println("\n\tJohnson counter\t Bit\n\t Gray code:\t Flipped:"); for( int intifiny=31; --intifiny; ) Serial.println( "\t " + cut( 5, "....." + // s.replace(...) returns zip, // so VVV use lambda function invoke via VVV // _____________________ V ____________________ ______________ V _____________ [](String s){ s.replace("0","."); return s; } ( String( JohnsonCode(), BIN ) ) ) + "\t " + bitCtr ); }/*
Unfortunately, this answer does not explain "How do you (I, did I, ...) find ...".
For details on the methodology of finding such solutions and using a BRGC similarly ...
see previous ref.: https://stackoverflow.com/a/42846062/7728918讨论(0)
加载中...
- 热议问题