Real world use of GADT

Question

How do I make use of Generalized Algebraic Data Type?

The example given in the haskell wikibook is too short to give me an insight of the real possibilities of GADT.

Answer 1

I like the example in the GHC manual. It's a quick demo of a core GADT idea: that you can embed the type system of a language you're manipulating into Haskell's type system. This lets your Haskell functions assume, and forces them to preserve, that the syntax trees correspond to well-typed programs.

When we define Term, it doesn't matter what types we choose. We could write

data Term a where
  ...
  IsZero :: Term Char -> Term Char

or

  ...
  IsZero :: Term a -> Term b

and the definition of Term would still go through.

It's only once we want to compute on Term, such as in defining eval, that the types matter. We need to have

  ...
  IsZero :: Term Int -> Term Bool

because we need our recursive call to eval to return an Int, and we want to in turn return a Bool.

Answer 2

GADTs are weak approximations of inductive families from dependently typed languages—so let's begin there instead.

Inductive families are the core datatype introduction method in a dependently typed language. For instance, in Agda you define the natural numbers like this

data Nat : Set where
  zero : Nat
  succ : Nat -> Nat 

which isn't very fancy, it's essentially just the same thing as the Haskell definition

data Nat = Zero | Succ Nat

and indeed in GADT syntax the Haskell form is even more similar

{-# LANGUAGE GADTs #-}

data Nat where
  Zero :: Nat
  Succ :: Nat -> Nat

So, at first blush you might think GADTs are just neat extra syntax. That's just the very tip of the iceberg though.

---

Agda has capacity to represent all kinds of types unfamiliar and strange to a Haskell programmer. A simple one is the type of finite sets. This type is written like Fin 3 and represents the set of numbers {0, 1, 2}. Likewise, Fin 5 represents the set of numbers {0,1,2,3,4}.

This should be quite bizarre at this point. First, we're referring to a type which has a regular number as a "type" parameter. Second, it's not clear what it means for Fin n to represent the set {0,1...n}. In real Agda we'd do something more powerful, but it suffices to say that we can define a contains function

contains : Nat -> Fin n -> Bool
contains i f = ?

Now this is strange again because the "natural" definition of contains would be something like i < n, but n is a value that only exists in the type Fin n and we shouldn't be able to cross that divide so easily. While it turns out that the definition is not nearly so straightforward, this is exactly the power that inductive families have in dependently typed languages—they introduce values that depend on their types and types that depend on their values.

---

We can examine what it is about Fin that gives it that property by looking at its definition.

data Fin : Nat -> Set where
  zerof : (n : Nat) -> Fin (succ n)
  succf : (n : Nat) -> (i : Fin n) -> Fin (succ n)

this takes a little work to understand, so as an example lets try constructing a value of the type Fin 2. There are a few ways to do this (in fact, we'll find that there are exactly 2)

zerof 1           : Fin 2
zerof 2           : Fin 3 -- nope!
zerof 0           : Fin 1 -- nope!
succf 1 (zerof 0) : Fin 2

This lets us see that there are two inhabitants and also demonstrates a little bit of how type computation happens. In particular, the (n : Nat) bit in the type of zerof reflects the actual value n up into the type allowing us to form Fin (n+1) for any n : Nat. After that we use repeated applications of succf to increment our Fin values up into the correct type family index (natural number that indexes the Fin).

What provides these abilities? In all honesty there are many differences in between a dependently typed inductive family and a regular Haskell ADT, but we can focus on the exact one that is most relevant to understanding GADTs.

In GADTs and inductive families you get an opportunity to specify the exact type of your constructors. This might be boring

data Nat where
  Zero :: Nat
  Succ :: Nat -> Nat

Or, if we have a more flexible, indexed type we can choose different, more interesting return types

data Typed t where
  TyInt  :: Int                -> Typed Int
  TyChar :: Char               -> Typed Char
  TyUnit ::                       Typed ()
  TyProd :: Typed a -> Typed b -> Typed (a, b)
  ...

In particular, we're abusing the ability to modify the return type based on the particular value constructor used. This allows us to reflect some value information up into the type and produce more finely specified (fibered) typed.

---

So what can we do with them? Well, with a little bit of elbow grease we can produce Fin in Haskell. Succinctly it requires that we define a notion of naturals in types

data Z
data S a = S a

> undefined :: S (S (S Z))  -- 3

... then a GADT to reflect values up into those types...

data Nat where
  Zero :: Nat Z
  Succ :: Nat n -> Nat (S n)

... then we can use these to build Fin much like we did in Agda...

data Fin n where
  ZeroF :: Nat n -> Fin (S n)
  SuccF :: Nat n -> Fin n -> Fin (S n)

And finally we can construct exactly two values of Fin (S (S Z))

*Fin> :t ZeroF (Succ Zero)
ZeroF (Succ Zero) :: Fin (S (S Z))

*Fin> :t SuccF (Succ Zero) (ZeroF Zero)
SuccF (Succ Zero) (ZeroF Zero) :: Fin (S (S Z))

But notice that we've lost a lot of convenience over the inductive families. For instance, we can't use regular numeric literals in our types (though that's technically just a trick in Agda anyway), we need to create a separate "type nat" and "value nat" and use the GADT to link them together, and we'd also find, in time, that while type level mathematics is painful in Agda it can be done. In Haskell it's incredibly painful and often cannot.

For instance, it's possible to define a weaken notion in Agda's Fin type

weaken : (n <= m) -> Fin n -> Fin m
weaken = ...

where we provide a very interesting first value, a proof that n <= m which allows us to embed "a value less than n" into the set of "values less than m". We can do the same in Haskell, technically, but it requires heavy abuse of type class prolog.

---

So, GADTs are a resemblance of inductive families in dependently typed languages that are weaker and clumsier. Why do we want them in Haskell in the first place?

Basically because not all type invariants require the full power of inductive families to express and GADTs pick a particular compromise between expressiveness, implementability in Haskell, and type inference.

Some examples of useful GADTs expressions are Red-Black Trees which cannot have the Red-Black property invalidated or simply-typed lambda calculus embedded as HOAS piggy-backing off the Haskell type system.

In practice, you also often see GADTs use for their implicit existential context. For instance, the type

data Foo where
  Bar :: a -> Foo

implicitly hides the a type variable using existential quantification

> :t Bar 4 :: Foo

in a way that is sometimes convenient. If you look carefully the HOAS example from Wikipedia uses this for the a type parameter in the App constructor. To express that statement without GADTs would be a mess of existential contexts, but the GADT syntax makes it natural.

Answer 3

This is a short answer, but consult the Haskell Wikibook. It walks you though a GADT for a well-typed expression tree, which is a fairly canonical example: http://en.wikibooks.org/wiki/Haskell/GADT

GADTs are also used for implementing type equality: http://hackage.haskell.org/package/type-equality. I can't find the right paper to reference for this offhand -- this technique has made its way well into folklore by now. It is used quite well, however, in Oleg's typed tagless stuff. See, e.g. the section on typed compilation into GADTs. http://okmij.org/ftp/tagless-final/#tc-GADT

Answer 4

GADTs can give you stronger type enforced guarantees than regular ADTs. For example, you can force a binary tree to be balanced on the type system level, like in this implementation of 2-3 trees:

{-# LANGUAGE GADTs #-}

data Zero
data Succ s = Succ s

data Node s a where
    Leaf2 :: a -> Node Zero a
    Leaf3 :: a -> a -> Node Zero a
    Node2 :: Node s a -> a -> Node s a -> Node (Succ s) a
    Node3 :: Node s a -> a -> Node s a -> a -> Node s a -> Node (Succ s) a

Each node has a type-encoded depth where all its leaves reside. A tree is then either an empty tree, a singleton value, or a node of unspecified depth, again using GADTs.

data BTree a where
    Root0 :: BTree a
    Root1 :: a -> BTree a
    RootN :: Node s a -> BTree a

The type system guarantees you that only balanced nodes can be constructed. This means that when implementing operations like insert on such trees, your code type-checks only if its result is always a balanced tree.

Answer 5

I have found the "Prompt" monad (from the "MonadPrompt" package) a very useful tool in several places (along with the equivalent "Program" monad from the "operational" package. Combined with GADTs (which is how it was intended to be used), it allows you to make embedded languages very cheaply and very flexibly. There was a pretty good article in the Monad Reader issue 15 called "Adventures in Three Monads" that had a good introduction to the Prompt monad along with some realistic GADTs.