log4net versus TraceSource [closed]

Answer 1

The reason that I prefer Log4Net to using Trace one of targeting - with Log4Net, I can independently instrument different layers of my application (Data Access, Services, Business Logic, etc) and different subsystems (Authentication, Processing, etc) and turn on/off the logging of each subsystem independently.

This flexibilty allows me to configure detailed logging for one subsystem without turning on the firehose for the entire system.

The static methods provided on the Trace class [such as TraceInformation()] don't provide any way to specify which subsystem the logging is from, so this isn't something easily provided by writing my own TraceListener.

Another reason is performance - there are piece of my application that potentially log several thousand messages per second. Log4Net imposes a low overhead. By contrast, last time I looked at it, The Logging Application block reparsed its XML configuration for every message logged, making the block very heavy and slow.

Answer 2

In the very early days (.NET 1.0) tracing in the .NET Framework was pretty limited.

For example TraceSource partitioning didn't come until .NET 2.0 and you only had four levels (Error, Warning, Information, Verbose), although you could use half a dozen boolean switches for partitioning if you wanted.

log4j is popular in Java and so got a lot of support for a .NET port, and once it became popular it kind of stayed that way, even though people don't even use it properly (e.g. wrapping it in a singleton logger and losing it's main feature).

Still, I think that log4net and other frameworks (e.g. NLog, Common.Logging, and even EntLib) went the wrong way by implementing their own logging system from the ground up, i.e. changing even the way you write log statements in the first place.

I would have much preferred to see effort, especially since .NET 2.0, put into extending the solid basis of what is already in .NET. For a project that does extend what is already there, have a look at the Essential Diagnostics project on CodePlex (http://essentialdiagnostics.codeplex.com/).

Some strengths of log4net:

• It is similar to log4j, if you run a mixed environment and want consistent logging.

• Automatic logger hierarchy that inherits settings is quite neat, compared to how many trace sources you implement and have to configure each. (although probably overkill in some cases).

• log4net already has around 28 appenders (equivalent to trace listeners), whereas System.Diagnostics only has 10 (but see the Essential.Diagnostics project for more), so if you really think you may need the RemoteSyslogAppender, NetSendAppender, AnsiColorTerminalAppender or TelnetAppender, then you are in luck.

Drawbacks (compared to System.Diagnostics):

• You need to use different logging syntax, so if you are already using source.TraceEvent(), you need to go through and replace everything.

• This also extends to different syntax for correlation, so you need to change from CorrelationManager to log4net contexts.

• Doesn't easily integrate with Framework tracing (e.g. WCF).

• Poor support for Event ID's (need to use a separate extension project IEventLog).

• Doesn't yet support Event Tracing for Windows (Vista), or the Service Trace Viewer XML format.

Answer 3

I think that log4net is doing every that you listed for me.

Pluggable listeners sounds like appenders - there are lots of them and in fact I even hacked the rolling log file to always end in .log (for file associations), added a cc field to the email appender, and have finally tuned my favourite values for the colored console appender. If I may be so bold - my colored console happiness:

<appender name="ColoredConsoleAppender" type="log4net.Appender.ColoredConsoleAppender">
<!-- Can Use:
        Blue
        Green
        Red
        White
        Yellow
        Purple
        Cyan
        HighIntensity
        -->
<mapping>
  <level value="FATAL" />
  <foreColor value="Yellow, HighIntensity" />
  <backColor value="Red" />
</mapping>
<mapping>
  <level value="ERROR" />
  <foreColor value="White" />
  <backColor value="Purple, HighIntensity" />
</mapping>
<mapping>
  <level value="WARN" />
  <backColor value="Blue" />
  <foreColor value="White" />
</mapping>
<mapping>
  <level value="INFO" />
  <backColor value="Green" />
  <foreColor value="White" />
</mapping>
<mapping>
  <level value="DEBUG" />
  <foreColor value="White" />
</mapping>
<layout type="log4net.Layout.PatternLayout">
  <!--<conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" />-->
  <!--<conversionPattern value="%-5level %file:%line - %message%newline" />-->
  <conversionPattern value="%level %logger:%line %newline     %message%newline" />
</layout>

Customisable trace switches: Log4net only comes with FATAL ERROR WARN INFO DEBUG in order of increasing verbosity. The only one I actually miss is AUDIT for who-did-what logging.

Customisable configuration: I use a log4net.config file which I load up at runtime (or write a log to c:\ whining that I can't find the config.)

    Try
        ' Get log4net configuration from file
        Dim logConfigFile As FileInfo
        logConfigFile = New FileInfo(".\log4net.config")

        If logConfigFile.Exists Then
            XmlConfigurator.Configure(logConfigFile)
        Else
            CreateEmergenceLogFile(logConfigFile.FullName)
        End If

    Catch ex As Exception
        Console.Out.WriteLine("Could not load the log4net config file")
    End Try

just a big set of TraceListeners: sorry skipping that one - I'll take your word for it.

Correlation of activities/scopes: do you mean like every file (read class) gets it's own named log that can have separate log level thresholds. In fact you can segment logging even in a single class (that in truth may have grown to do too much ...)

In a class file:

    Private Shared _logger As log4net.ILog = _
log4net.LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType)

Private Shared _loggerAttribute As log4net.ILog = _
log4net.LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType.FullName & ".Attribute")

Private Shared _loggerCache As log4net.ILog = _
log4net.LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType.FullName & ".Cache")

The Service Trace Viewer: in the log4net.config:

  <logger name="NipissingU.ADWrapper.EntryTools.Attribute">
    <level value="INFO" />
  </logger>
  <logger name="NipissingU.ADWrapper.EntryTools.Cache">
    <level value="WARN" />
  </logger>

All of it is configurable in app.config/web.config: well maybe that is a good thing in ASP.NET, I don't know, but when making rich client bean counting apps I like a separate config file.

Everything here is just my own little usage tricks.

hth, -Mike

Answer 4

Another reason for using TraceSources instead of Log4Net is Tracing itself: Log4Net can only be used for Logging (messages) but how to trace an Object (multiple informations at the same time)? Of course Log4Net has a lot of Listeners implementd, but do I need all these? In most of cases not. And if I need a special listener, it's not as hard do implement my own one, isn't it? For example i neede a listener to trace into a database (not only messages but different informations {string's, int's, etc.} at the same time).

Are I'm right?

Answer 5

While Im only privy to the way log4net works, an obvious bonus to using that framework is immediate familiarity for those used to using log4j.

Another small benefit is that test driving logging using log4net is extremely simple; loggers implement log4net.ILog. Again Im not familiar with the Microsoft solution, but Im wondering how one would do this without first writing a facade to the System.Diagnostics.Trace class.

With a cursory look at the trace sources documentation, I could not find an equivalent to layouts, and would be interested to know if such an equivalent exists. The PatternLayout is quite handy for formatting log entries with common data like datestamps, thread info, log context etc. Log4net PatternLayout docs: http://logging.apache.org/log4net/release/sdk/log4net.Layout.PatternLayout.html

Additionally, given that writing extensions to a logging framework is probably a classic 'meta-problem', log4net does bring a grand list of pluggable listener equivalents to the table.

List of appenders: http://logging.apache.org/log4net/release/config-examples.html