how to calculate exact foot step count using accelerometer in android?

Question

I am developing some application like Runtastic Pedometer using the algorithm but I am not getting any similarity between the results.

my code is as follows:

Answer 1

One main difference I spotted between your implementation and the code in the grepcode project is the way you register the listener.

Your code:

mSensorManager.registerListener(mStepDetector,
                                mSensor,
                                SensorManager.SENSOR_DELAY_NORMAL);

Their code:

mSensorManager.registerListener(mStepDetector,
                                mSensor,
                                SensorManager.SENSOR_DELAY_FASTEST);

This is a big difference. SENSOR_DELAY_NORMAL is intended for orientation changes, and is therefor not that fast (ever noticed that it takes some time between you rotating the device, and the device actually rotating? That's because this is some functionality that does not need to be super fast (that would probably be pretty annoying even). The rate at which you get updates is not that high).

On the other hand, SENSOR_DELAY_FASTEST is intended for things like pedometers: you want the sensor data as fast and often as possible, so your calculations of steps will be as accurate as possible.

Try to switch to the SENSOR_DELAY_FASTEST rate, and test again! It should make a big difference.

Answer 2

This is my realization. It was written about 1.5-2 years ago. And I really don't remember all this stuff that I wrote. But it worked. And it worked good for my needs.

I know that this is really big class (some methods are deleted), but may be it will be helpful. If not, I'll just remove this answer...

public class StepDetector implements SensorEventListener
{
    public static final int MAX_BUFFER_SIZE = 5;

    private static final int Y_DATA_COUNT = 4;
    private static final double MIN_GRAVITY = 2;
    private static final double MAX_GRAVITY = 1200;

    public void onSensorChanged(final SensorEvent sensorEvent)
    {
        final float[] values = sensorEvent.values;
        final Sensor sensor = sensorEvent.sensor;

        if (sensor.getType() == Sensor.TYPE_MAGNETIC_FIELD)
        {
            magneticDetector(values, sensorEvent.timestamp / (500 * 10 ^ 6l));
        }
        if (sensor.getType() == Sensor.TYPE_ACCELEROMETER)
        {
            accelDetector(values, sensorEvent.timestamp / (500 * 10 ^ 6l));
        }
    }

    private ArrayList<float[]> mAccelDataBuffer = new ArrayList<float[]>();
    private ArrayList<Long> mMagneticFireData = new ArrayList<Long>();
    private Long mLastStepTime = null;
    private ArrayList<Pair> mAccelFireData = new ArrayList<Pair>();

    private void accelDetector(float[] detectedValues, long timeStamp)
    {
        float[] currentValues = new float[3];
        for (int i = 0; i < currentValues.length; ++i)
        {
            currentValues[i] = detectedValues[i];
        }
        mAccelDataBuffer.add(currentValues);
        if (mAccelDataBuffer.size() > StepDetector.MAX_BUFFER_SIZE)
        {
            double avgGravity = 0;
            for (float[] values : mAccelDataBuffer)
            {
                avgGravity += Math.abs(Math.sqrt(
                        values[0] * values[0] + values[1] * values[1] + values[2] * values[2]) -    SensorManager.STANDARD_GRAVITY);
            }
            avgGravity /= mAccelDataBuffer.size();

            if (avgGravity >= MIN_GRAVITY && avgGravity < MAX_GRAVITY)
            {
                mAccelFireData.add(new Pair(timeStamp, true));
            }
            else
            {
                mAccelFireData.add(new Pair(timeStamp, false));
            }

            if (mAccelFireData.size() >= Y_DATA_COUNT)
            {
                checkData(mAccelFireData, timeStamp);

                mAccelFireData.remove(0);
            }

            mAccelDataBuffer.clear();
        }
    }

    private void checkData(ArrayList<Pair> accelFireData, long timeStamp)
    {
        boolean stepAlreadyDetected = false;

        Iterator<Pair> iterator = accelFireData.iterator();
        while (iterator.hasNext() && !stepAlreadyDetected)
        {
            stepAlreadyDetected = iterator.next().first.equals(mLastStepTime);
        }
        if (!stepAlreadyDetected)
        {
            int firstPosition = Collections.binarySearch(mMagneticFireData, accelFireData.get(0).first);
            int secondPosition = Collections
                .binarySearch(mMagneticFireData, accelFireData.get(accelFireData.size() - 1).first - 1);

            if (firstPosition > 0 || secondPosition > 0 || firstPosition != secondPosition)
            {
                if (firstPosition < 0)
                {
                    firstPosition = -firstPosition - 1;
                }
                if (firstPosition < mMagneticFireData.size() && firstPosition > 0)
                {
                    mMagneticFireData = new ArrayList<Long>(
                           mMagneticFireData.subList(firstPosition - 1, mMagneticFireData.size()));
                }

                iterator = accelFireData.iterator();
                while (iterator.hasNext())
                {
                    if (iterator.next().second)
                    {
                        mLastStepTime = timeStamp;
                        accelFireData.remove(accelFireData.size() - 1);
                        accelFireData.add(new Pair(timeStamp, false));
                        onStep();
                        break;
                    }
                }
            }
        }
    }

    private float mLastDirections;
    private float mLastValues;
    private float mLastExtremes[] = new float[2];
    private Integer mLastType;
    private ArrayList<Float> mMagneticDataBuffer = new ArrayList<Float>();

    private void magneticDetector(float[] values, long timeStamp)
    {
        mMagneticDataBuffer.add(values[2]);

        if (mMagneticDataBuffer.size() > StepDetector.MAX_BUFFER_SIZE)
        {
            float avg = 0;

            for (int i = 0; i < mMagneticDataBuffer.size(); ++i)
            {
                avg += mMagneticDataBuffer.get(i);
            }

            avg /= mMagneticDataBuffer.size();

            float direction = (avg > mLastValues ? 1 : (avg < mLastValues ? -1 : 0));
            if (direction == -mLastDirections)
            {
                // Direction changed
                int extType = (direction > 0 ? 0 : 1); // minumum or maximum?
                mLastExtremes[extType] = mLastValues;
                float diff = Math.abs(mLastExtremes[extType] - mLastExtremes[1 - extType]);

                if (diff > 8 && (null == mLastType || mLastType != extType))
                {
                    mLastType = extType;

                    mMagneticFireData.add(timeStamp);
                }
            }
            mLastDirections = direction;
            mLastValues = avg;

            mMagneticDataBuffer.clear();
        }
    }

    public static class Pair implements Serializable
    {
        Long first;
        boolean second;

        public Pair(long first, boolean second)
        {
            this.first = first;
            this.second = second;
        }

        @Override
        public boolean equals(Object o)
        {
            if (o instanceof Pair)
            {
                return first.equals(((Pair) o).first);
            }
            return false;
        }
    }
}

Answer 3

https://github.com/bagilevi/android-pedometer

i hope this might be helpfull

Answer 4

I am using step detection in my walking instrument. I get nice results of step detection. I use achartengine to plot accelerometer data. Take a look here. What I do:

1. Analysis of magnitude vector for accelerometer sensor.
2. Setting a changeable threshold level. When signal from accelerometer is above it I count it as a step.
3. Setting the time of inactive state (for step detection) after first crossing of the threshold.

Point 3. is calculated:

• arbitrary setting the maximum tempo of our walking (e.g. 120bpm)
• if 60bpm - 1000msec per step, then 120bpm - 500msec per step
• accelerometer passes data with certain desired frequency (SENSOR_DELAY_NORMAL, SENSOR_DELAY_GAME, etc.). When DELAY_GAME: T ~= 20ms (this is included in Android documentation)
• n - samples to omit (after passing the threshold)
• n = 500msec / T
• n = 500 / 20 = 25 (plenty of them. You can adjust this value).
• after that, the threshold becomes active.

Take a look at this picture:

Answer 5

The first thing you need to do is decide on an algorithm. As far as I know there are roughly speaking three ways to detect steps using accelerometers that are described in the literature:

1. Use the Pythagorean theorem to calculate the magnitude of the acceleration vector of each sample from the accelerometer. Low-pass filter the magnitude signal to remove high frequency noise and then look for peaks and valleys in the filtered signal. You may need to add additional requirements to remove false positives. This is by far the simplest way to detect steps, it is also the way that most if not all ordinary pedometers of the sort that you can buy from a sports store work.

2. Use Pythagoras' like in (1), then run the signal through an FFT and compare the output from the FFT to known outputs of walking. This requires you to have access to a fairly large amount of training data.

3. Feed the accelerometer data into an algorithm that uses some suitable machine learning technique, for example a neural network or a digital wavelet transform. You can of course include other sensors in this approach. This also requires you to have access to a fairly large amount of training data.

Once you have decided on an algorithm you will probably want to use something like Matlab or SciPy to test your algorithm on your computer using recordings that you have made on Android phones. Dump accelerometer data to a cvs file on your phone, make a record of how many steps the file represents, copy the file to your computer and run your algorithm on the data to see if it gets the step count right. That way you can detect problems with the algorithm and correct them.

If this sounds difficult, then the best way to get access to good step detection is probably to wait until more phones come with the built-in step counter that KitKat enables.