How to encrypt/decrypt data in php?

Question

I\'m currently a student and I\'m studying PHP, I\'m trying to make a simple encrypt/decrypt of data in PHP. I made some online research and some of them were quite confusin

Answer 1

I'm think this has been answered before...but anyway, if you want to encrypt/decrypt data, you can't use SHA256

//Key
$key = 'SuperSecretKey';

//To Encrypt:
$encrypted = mcrypt_encrypt(MCRYPT_RIJNDAEL_256, $key, 'I want to encrypt this', MCRYPT_MODE_ECB);

//To Decrypt:
$decrypted = mcrypt_decrypt(MCRYPT_RIJNDAEL_256, $key, $encrypted, MCRYPT_MODE_ECB);

Answer 2

Here is an example using openssl_encrypt

//Encryption:
$textToEncrypt = "My Text to Encrypt";
$encryptionMethod = "AES-256-CBC";
$secretHash = "encryptionhash";
$iv = mcrypt_create_iv(16, MCRYPT_RAND);
$encryptedText = openssl_encrypt($textToEncrypt,$encryptionMethod,$secretHash, 0, $iv);

//Decryption:
$decryptedText = openssl_decrypt($encryptedText, $encryptionMethod, $secretHash, 0, $iv);
print "My Decrypted Text: ". $decryptedText;

Answer 3

Foreword

Starting with your table definition:

- UserID
- Fname
- Lname
- Email
- Password
- IV

Here are the changes:

1. The fields Fname, Lname and Email will be encrypted using a symmetric cipher, provided by OpenSSL,
2. The IV field will store the initialisation vector used for encryption. The storage requirements depend on the cipher and mode used; more about this later.
3. The Password field will be hashed using a one-way password hash,

Encryption

Cipher and mode

Choosing the best encryption cipher and mode is beyond the scope of this answer, but the final choice affects the size of both the encryption key and initialisation vector; for this post we will be using AES-256-CBC which has a fixed block size of 16 bytes and a key size of either 16, 24 or 32 bytes.

Encryption key

A good encryption key is a binary blob that's generated from a reliable random number generator. The following example would be recommended (>= 5.3):

$key_size = 32; // 256 bits
$encryption_key = openssl_random_pseudo_bytes($key_size, $strong);
// $strong will be true if the key is crypto safe

This can be done once or multiple times (if you wish to create a chain of encryption keys). Keep these as private as possible.

IV

The initialisation vector adds randomness to the encryption and required for CBC mode. These values should be ideally be used only once (technically once per encryption key), so an update to any part of a row should regenerate it.

A function is provided to help you generate the IV:

$iv_size = 16; // 128 bits
$iv = openssl_random_pseudo_bytes($iv_size, $strong);

Example

Let's encrypt the name field, using the earlier $encryption_key and $iv; to do this, we have to pad our data to the block size:

function pkcs7_pad($data, $size)
{
    $length = $size - strlen($data) % $size;
    return $data . str_repeat(chr($length), $length);
}

$name = 'Jack';
$enc_name = openssl_encrypt(
    pkcs7_pad($name, 16), // padded data
    'AES-256-CBC',        // cipher and mode
    $encryption_key,      // secret key
    0,                    // options (not used)
    $iv                   // initialisation vector
);

Storage requirements

The encrypted output, like the IV, is binary; storing these values in a database can be accomplished by using designated column types such as BINARY or VARBINARY.

The output value, like the IV, is binary; to store those values in MySQL, consider using BINARY or VARBINARY columns. If this is not an option, you can also convert the binary data into a textual representation using base64_encode() or bin2hex(), doing so requires between 33% to 100% more storage space.

Decryption

Decryption of the stored values is similar:

function pkcs7_unpad($data)
{
    return substr($data, 0, -ord($data[strlen($data) - 1]));
}

$row = $result->fetch(PDO::FETCH_ASSOC); // read from database result
// $enc_name = base64_decode($row['Name']);
// $enc_name = hex2bin($row['Name']);
$enc_name = $row['Name'];
// $iv = base64_decode($row['IV']);
// $iv = hex2bin($row['IV']);
$iv = $row['IV'];

$name = pkcs7_unpad(openssl_decrypt(
    $enc_name,
    'AES-256-CBC',
    $encryption_key,
    0,
    $iv
));

Authenticated encryption

You can further improve the integrity of the generated cipher text by appending a signature that's generated from a secret key (different from the encryption key) and the cipher text. Before the cipher text is decrypted, the signature is first verified (preferably with a constant-time comparison method).

Example

// generate once, keep safe
$auth_key = openssl_random_pseudo_bytes(32, $strong);

// authentication
$auth = hash_hmac('sha256', $enc_name, $auth_key, true);
$auth_enc_name = $auth . $enc_name;

// verification
$auth = substr($auth_enc_name, 0, 32);
$enc_name = substr($auth_enc_name, 32);
$actual_auth = hash_hmac('sha256', $enc_name, $auth_key, true);

if (hash_equals($auth, $actual_auth)) {
    // perform decryption
}

See also: hash_equals()

Hashing

Storing a reversible password in your database must be avoided as much as possible; you only wish to verify the password rather than knowing its contents. If a user loses their password, it's better to allow them to reset it rather than sending them their original one (make sure that password reset can only be done for a limited time).

Applying a hash function is a one-way operation; afterwards it can be safely used for verification without revealing the original data; for passwords, a brute force method is a feasible approach to uncover it due to its relatively short length and poor password choices of many people.

Hashing algorithms such as MD5 or SHA1 were made to verify file contents against a known hash value. They're greatly optimized to make this verification as fast as possible while still being accurate. Given their relatively limited output space it was easy to build a database with known passwords and their respective hash outputs, the rainbow tables.

Adding a salt to the password before hashing it would render a rainbow table useless, but recent hardware advancements made brute force lookups a viable approach. That's why you need a hashing algorithm that's deliberately slow and simply impossible to optimize. It should also be able to increase the load for faster hardware without affecting the ability to verify existing password hashes to make it future proof.

Currently there are two popular choices available:

1. PBKDF2 (Password Based Key Derivation Function v2)
2. bcrypt (aka Blowfish)

This answer will use an example with bcrypt.

Generation

A password hash can be generated like this:

$password = 'my password';
$random = openssl_random_pseudo_bytes(18);
$salt = sprintf('$2y$%02d$%s',
    13, // 2^n cost factor
    substr(strtr(base64_encode($random), '+', '.'), 0, 22)
);

$hash = crypt($password, $salt);

The salt is generated with openssl_random_pseudo_bytes() to form a random blob of data which is then run through base64_encode() and strtr() to match the required alphabet of [A-Za-z0-9/.].

The crypt() function performs the hashing based on the algorithm ($2y$ for Blowfish), the cost factor (a factor of 13 takes roughly 0.40s on a 3GHz machine) and the salt of 22 characters.

Validation

Once you have fetched the row containing the user information, you validate the password in this manner:

$given_password = $_POST['password']; // the submitted password
$db_hash = $row['Password']; // field with the password hash

$given_hash = crypt($given_password, $db_hash);

if (isEqual($given_hash, $db_hash)) {
    // user password verified
}

// constant time string compare
function isEqual($str1, $str2)
{
    $n1 = strlen($str1);
    if (strlen($str2) != $n1) {
        return false;
    }
    for ($i = 0, $diff = 0; $i != $n1; ++$i) {
        $diff |= ord($str1[$i]) ^ ord($str2[$i]);
    }
    return !$diff;
}

To verify a password, you call crypt() again but you pass the previously calculated hash as the salt value. The return value yields the same hash if the given password matches the hash. To verify the hash, it's often recommended to use a constant-time comparison function to avoid timing attacks.

Password hashing with PHP 5.5

PHP 5.5 introduced the password hashing functions that you can use to simplify the above method of hashing:

$hash = password_hash($password, PASSWORD_BCRYPT, ['cost' => 13]);

And verifying:

if (password_verify($given_password, $db_hash)) {
    // password valid
}

See also: password_hash(), password_verify()

Answer 4

Answer Background and Explanation

To understand this question, you must first understand what SHA256 is. SHA256 is a Cryptographic Hash Function. A Cryptographic Hash Function is a one-way function, whose output is cryptographically secure. This means it is easy to compute a hash (equivalent to encrypting data), but hard to get the original input using the hash (equivalent to decrypting the data). Since using a Cryptographic hash function means decrypting is computationally infeasible, so therefore you cannot perform decryption with SHA256.

What you want to use is a two-way function, but more specifically, a Block Cipher. A function that allows for both encryption and decryption of data. The functions mcrypt_encrypt and mcrypt_decrypt by default use the Blowfish algorithm. PHP's use of mcrypt can be found in this manual. A list of cipher definitions to select the cipher mcrypt uses also exists. A wiki on Blowfish can be found at Wikipedia. A block cipher encrypts the input in blocks of known size and position with a known key, so that the data can later be decrypted using the key. This is what SHA256 cannot provide you.

Code

$key = 'ThisIsTheCipherKey';

$ciphertext = mcrypt_encrypt(MCRYPT_BLOWFISH, $key, 'This is plaintext.', MCRYPT_MODE_CFB);

$plaintext = mcrypt_decrypt(MCRYPT_BLOWFISH, $key, $encrypted, MCRYPT_MODE_CFB);

Answer 5

It took me quite a while to figure out, how to not get a false when using openssl_decrypt() and get encrypt and decrypt working.

    // cryptographic key of a binary string 16 bytes long (because AES-128 has a key size of 16 bytes)
    $encryption_key = '58adf8c78efef9570c447295008e2e6e'; // example
    $iv = openssl_random_pseudo_bytes(openssl_cipher_iv_length('aes-256-cbc'));
    $encrypted = openssl_encrypt($plaintext, 'aes-256-cbc', $encryption_key, OPENSSL_RAW_DATA, $iv);
    $encrypted = $encrypted . ':' . base64_encode($iv);

    // decrypt to get again $plaintext
    $parts = explode(':', $encrypted);
    $decrypted = openssl_decrypt($parts[0], 'aes-256-cbc', $encryption_key, OPENSSL_RAW_DATA, base64_decode($parts[1])); 

If you want to pass the encrypted string via a URL, you need to urlencode the string:

    $encrypted = urlencode($encrypted);

To better understand what is going on, read:

• http://blog.turret.io/the-missing-php-aes-encryption-example/
• http://thefsb.tumblr.com/post/110749271235/using-opensslendecrypt-in-php-

To generate 16 bytes long keys you can use:

    $bytes = openssl_random_pseudo_bytes(16);
    $hex = bin2hex($bytes);

To see error messages of openssl you can use: echo openssl_error_string();

Hope that helps.

Answer 6

     function my_simple_crypt( $string, $action = 'e' ) {
        // you may change these values to your own
        $secret_key = 'my_simple_secret_key';
        $secret_iv = 'my_simple_secret_iv';

        $output = false;
        $encrypt_method = "AES-256-CBC";
        $key = hash( 'sha256', $secret_key );
        $iv = substr( hash( 'sha256', $secret_iv ), 0, 16 );

        if( $action == 'e' ) {
            $output = base64_encode( openssl_encrypt( $string, $encrypt_method, $key, 0, $iv ) );
        }
        else if( $action == 'd' ){
            $output = openssl_decrypt( base64_decode( $string ), $encrypt_method, $key, 0, $iv );
        }

        return $output;
    }