LG G3 device not recognized by Eclipse on Windows

Question

I recently bought LG G3 and I have enabled debugging mode but Eclipse is still not recognizing it, back when I used the Galaxy S3 for development I had to install Samsung Ki

Answer 1

After a lot of searching and trying all solutions still I couldn't connect my LG G3 to eclipse on mac. Finally I find this solution, it works for me hope for you works too:

1. Install LG USB driver for mac

2. Go and enable developer mode in your G3 (Setting->About phone (in General Tab)--> Software information --> Tap 8 times on Build Number) then you will see the message which says the Developer option is enabled

3. In this step you expect that after connecting your mobile via USB cable, the Eclipse detect it But for me it didn't happen

4. in this step you need to go (Setting--> Developer Options--> and turn off this option from above green (on/off) switch then again switch on this option from same place (If you don't do this step the "USB Debugging" mode will stay fray and you can not enable it)

5. In Developer Options menu scroll down until find the "USB Debugging" then tic it and enable it.

6. almost finished , you should back and configure running mode for your application and see the G3 in your connected usb devices

Answer 2

For me, this has solved the problem: simply go to LG's website, http://www.lg.com/us/support/software-manuals, select the model (I have selected 'D850') and go to Software Updates tab where you can download the driver. I have installed it and then Eclipse recognized my device. I'm working on Windows 8.1, by the way.

yakobom

Answer 3

Working on Windows 7. All of the solutions from other sites didn't help (i.e. restarting adb and switching between MTP, PTP, Charing). In the end, I found this article (http://www.technobuzz.net/install-lg-g3-lg-drivers-windows-mac-usb-adb/), which contains links for the necessary drivers for the lg g3 (and some others I think). This did the trick and made the RSA key fingerprint dialog appear finally. After confirming, adb and eclipse recognize my device perfectly!

Answer 4

Change the USB mode to PTP and you will get the RSA prompt.

Within the prompt, select allow it > ok and you are done.

This worked for me when I had the same problem on a Mac computer.

Answer 5

ADB Single/Composite values for LG G3 phones -

I found it was necessary to update (~userName/.android/)adb_usb.ini file with the line 0x1004:

# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.

0x2207
0x1004

In addition, I needed to add the following entry in (.../sdk/extras/google/usb_driver/)android_winusb.inf:

;
; Android WinUsb driver installation.
;
...
[Google.NTx86]
...

;LGE Android Phone
%SingleAdbInterface%        = USB_Install, USB\VID_1004&PID_633E
%CompositeAdbInterface%     = USB_Install, USB\VID_1004&PID_631D&MI_00
%CompositeAdbInterface%     = USB_Install, USB\VID_1004&PID_631D&MI_01

[Google.NTamd64]
...

Oh, and set USB to PTP as well as turn-on USB debugging. When you're all done with the file modifications and several passes at installing the drivers (ref. earlier posts), you can verify your phone is ready via the Device Manager. It will list your phone as "Android Device"->"Android Composite ADB Interface". I believe an earlier post explains setting up the drivers

Answer 6

it seems that Eclipse shows the offline mode for lg G3 and some newer devices and there is no way no use these devices for ADB debugging

there is a way

I am using windows 10

1- download this 11 MB file < http://dl2.uncox.com/android/upload/platform-tools-v22.zip>

2- then go to the directory that you installed the SDK

3- extract the zip file in to the platform-tools folder , override all files(click yes to all) be sure that Eclipse doesn't running

4- open Eclipse and select your android device that stands in devices tab at the right-top corner of your screen and then you can see the arrow near the screen- capture icon and you will find the reset-ADB. click on it ,after that your phone will ask you to allow android debugging for your device click on it

5- congratulations .now you can see that your device shown online

i hope this will help .sorry for my english