Press-and-hold button for “repeat fire”

Question

I have referred to countless other questions about a press-and-hold button but there aren\'t many related to Swift. I have one function connected to a button using the touch

Answer 1

In my original answer, I answered the question of how to have a button recognize both a tap and a long press. In the clarified question, it appears you want this button to continuously "fire" as long as the user holds their finger down. If that's the case, only one gesture recognizer is needed.

For example, in Interface Builder, drag a long press gesture recognizer from the object library onto the button and then set the "Min Duration" to zero:

Then you can control-drag from the long press gesture recognizer to your code in the assistant editor and add an @IBAction to handle the long press:

var timer: NSTimer?

@IBAction func longPressHandler(gesture: UILongPressGestureRecognizer) {
    if gesture.state == .Began {
        timer = NSTimer.scheduledTimerWithTimeInterval(0.3, target: self, selector: "handleTimer:", userInfo: nil, repeats: true)
    } else if gesture.state == .Ended || gesture.state == .Cancelled {
        timer?.invalidate()
        timer = nil
    }
}

func handleTimer(timer: NSTimer) {
    NSLog("bang")
}

Or, if you also want to stop firing when the user drags their finger off of the button, add a check for the location of the gesture:

@IBAction func longPressHandler(gesture: UILongPressGestureRecognizer) {
    if gesture.state == .Began {
        timer = NSTimer.scheduledTimerWithTimeInterval(0.3, target: self, selector: "handleTimer:", userInfo: nil, repeats: true)
    } else if gesture.state == .Ended || gesture.state == .Cancelled || (gesture.state == .Changed && !CGRectContainsPoint(gesture.view!.bounds, gesture.locationInView(gesture.view))) {
        timer?.invalidate()
        timer = nil
    }
}

My original answer, answering the different question of how to recognize both taps and long presses on a button, is below:

---

Personally, I'd use tap and long press gesture recognizers, e.g.:

override func viewDidLoad() {
    super.viewDidLoad()

    let longPress = UILongPressGestureRecognizer(target: self, action: "handleLongPress:")
    button.addGestureRecognizer(longPress)

    let tap = UITapGestureRecognizer(target: self, action: "handleTap:")
    tap.requireGestureRecognizerToFail(longPress)
    button.addGestureRecognizer(tap)
}

func handleTap(gesture: UITapGestureRecognizer) {
    print("tap")
}

func handleLongPress(gesture: UILongPressGestureRecognizer) {
    if gesture.state == .Began {
        print("long press")
    }
}

If you want, with the long press gesture, you could perform your action upon .Ended, too. It just depends upon the desired UX.

FYI, you can also add these two gesture recognizers right in Interface Builder, too, (just drag the respective gestures from the object library on to the button and then control-drag from the gesture recognizer to @IBAction functions) but it was easier to illustrate what's going on by showing it programmatically.

Answer 2

You can use Timer

follow this example on github

https://github.com/sadeghgoo/RunCodeWhenUIbuttonIsHeld

Answer 3

I took a different approach when coming up with my own solution. I created a UIButton subclass and enclosed all the solution inside. The difference is that instead of using an IBAction for the handler I created a property in the UIButton

class RapidFireButton: UIButton {

    private var rapidFireTimer: Timer?
    override init(frame: CGRect) {
        super.init(frame: frame)
        commonInit()
    }

    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        commonInit()
    }

    init() {
        super.init(frame: .zero)
        commonInit()
    }

    private func commonInit() {
        addTarget(self, action: #selector(touchDownHandler), for: .touchDown)
        addTarget(self, action: #selector(touchUpHandler), for: .touchUpOutside)
        addTarget(self, action: #selector(touchUpHandler), for: .touchUpInside)
    }

    @objc private func touchDownHandler() {
        rapidFireTimer?.invalidate()
        rapidFireTimer = nil
        tapHandler(self)
        rapidFireTimer = Timer.scheduledTimer(withTimeInterval: 0.1, repeats: true, block: { [unowned self] (timer) in
            self.tapHandler(self)
        })
    }

    @objc private func touchUpHandler() {
        rapidFireTimer?.invalidate()
        rapidFireTimer = nil
    }

    var tapHandler: (RapidFireButton) -> Void = { button in

    } 
}

Usage is basically creating an outlet for the button and implementing the handler like so

rapidFireButton.tapHandler = { button in
    //do stuff
}

Answer 4

I updated @vacawama example codes to swift 3. Thanks.

@IBOutlet var button: UIButton!

var timer: Timer!
var speedAmmo = 100

@IBAction func buttonDown(sender: AnyObject) {
    singleFire()
    timer = Timer.scheduledTimer(timeInterval: 0.1, target: self, selector:#selector(rapidFire), userInfo: nil, repeats: true)
}

@IBAction func buttonUp(sender: AnyObject) {
    timer.invalidate()
}

func singleFire() {
    if speedAmmo > 0 {
        speedAmmo -= 1
        print("bang!")
    } else {
        print("out of speed ammo, dude!")
        timer.invalidate()
    }
}

func rapidFire() {
    if speedAmmo > 0 {
        speedAmmo -= 1
        print("bang!")
    } else {
        print("out of speed ammo, dude!")
        timer.invalidate()
    }
}

override func viewDidLoad() {
    super.viewDidLoad()

    button.addTarget(self, action:#selector(buttonDown(sender:)), for: .touchDown)
    button.addTarget(self, action:#selector(buttonUp(sender:)), for: [.touchUpInside, .touchUpOutside])
}

Answer 5

You want rapid repeat fire when your button is held down.

Your buttonDown and buttonUp methods need to be defined at the top level, and not inside of another function. For demonstration purposes, it is clearer to forgo wiring up @IBActions from the Storyboard and just set up the button in viewDidLoad:

class ViewController: UIViewController {

    @IBOutlet weak var button: UIButton!
    var timer: Timer?
    var speedAmmo = 20

    @objc func buttonDown(_ sender: UIButton) {
        singleFire()
        timer = Timer.scheduledTimer(timeInterval: 0.3, target: self, selector: #selector(rapidFire), userInfo: nil, repeats: true)
    }

    @objc func buttonUp(_ sender: UIButton) {
        timer?.invalidate()
    }

    func singleFire() {
        print("bang!")
    }

    @objc func rapidFire() {
        if speedAmmo > 0 {
            speedAmmo -= 1
            print("bang!")
        } else {
            print("out of speed ammo, dude!")
            timer?.invalidate()
        }
    }

    override func viewDidLoad() {
        super.viewDidLoad()

        // These could be added in the Storyboard instead if you mark
        // buttonDown and buttonUp with @IBAction
        button.addTarget(self, action: #selector(buttonDown), for: .touchDown)
        button.addTarget(self, action: #selector(buttonUp), for: [.touchUpInside, .touchUpOutside])
    }
}

Also, I changed .touchUpOutside to [.touchUpInside, .touchUpOutside] (to catch both touch up events) and call singleFire on the initial buttonDown for single fire. With these changes, pressing the button fires immediately, and then fires every 0.3 seconds for as long as the button is held down.

---

The button can be wired up in the Storyboard instead of setting it up in viewDidLoad. In this case, add @IBAction to buttonDown and buttonUp. Then Control-click on your button in the Storyboard and drag from the circle next to Touch Down to func buttonDown, and drag from the circles next to Touch Up Inside and Touch Up Outside to func buttonUp.

Answer 6

Swift 5+

Based on rob's answer there is a nicer way to do this now.

Add the long press gesture recognizer by dragging it on-top of the button in the storyboard and then ...

Then you can control-drag from the long press gesture recognizer to your code in the assistant editor and add an @IBAction to handle the long press: - Quote from Rob's Answer

The difference is in the code which is listed below:

var timer: Timer?

@IBAction func downButtonLongPressHandler(_ sender: UILongPressGestureRecognizer) {
        if sender.state == .began {
            timer = Timer.scheduledTimer(withTimeInterval: 0.2, repeats: true, block: {_ in
                self.downButtonPressedLogic()
                self.doCalculations()
            })
        } else if sender.state == .ended || sender.state == .cancelled {
            print("FINISHED UP LONG PRESS")
            timer?.invalidate()
            timer = nil
        }
}

You no longer need to use NSTimer, you can just use Timer now and you can just put the code for the timer in the block which is much more compact and no need for selectors.

In my case I had another function that handles the logic for what to do when the downButton was pressed, but you can put your code you want to handle in there.

You can control the speed of the repeat fire by changing the withTimeInterval parameter value.

You can change the timing for the timer to start by finding the longPressGesture in your storyboard and changing it's Min Duration value. I usually set mine at 0.5 so that your normal button press actions can still work (unless you don't care about that). If you set it to 0 this will ALWAYS override your normal button press actions.