How to short-circuit a reduce() operation on a Stream?

Question

This is essentially the same question as How to short-circuit reduce on Stream?. However, since that question focuses on a Stream of boolean values, and its answer cannot be

Answer 1

My own take at this is to not use reduce() per se, but use an existing short-circuiting final operation.

noneMatch() or allMatch() can be used for this when using a Predicate with a side effect. Admittedly also not the cleanest solution, but it does achieve the goal :

AtomicInteger product = new AtomicInteger(1);
IntStream.of(2, 3, 4, 5, 0, 7, 8)
        .peek(System.out::println)
        .noneMatch(i -> {
            if (i == 0) {
                product.set(0);
                return true;
            }
            int oldValue = product.get();
            while (oldValue != 0 && !product.compareAndSet(oldValue, i * oldValue)) {
                oldValue = product.get();
            }
            return oldValue == 0;
        });
System.out.println("Result: " + product.get());

It short-circuits and can be made parallel.

Answer 2

A general short-circuiting static reduce method can be implemented using the spliterator of a stream. It even turned out to be not very complicated! Using spliterators seems to be the way to go a lot of times when one wants to work with steams in a more flexible way.

public static <T> T reduceWithCancel(Stream<T> s, T acc, BinaryOperator<T> op, Predicate<? super T> cancelPred) {
    BoxConsumer<T> box = new BoxConsumer<T>();
    Spliterator<T> splitr = s.spliterator();

    while (!cancelPred.test(acc) && splitr.tryAdvance(box)) {
        acc = op.apply(acc, box.value);
    }

    return acc;
}

public static class BoxConsumer<T> implements Consumer<T> {
    T value = null;
    public void accept(T t) {
        value = t;
    }
}

Usage:

    int product = reduceWithCancel(
        Stream.of(1, 2, 0, 3, 4).peek(System.out::println),
        1, (acc, i) -> acc * i, i -> i == 0);

    System.out.println("Result: " + product);

Output:

1
2
0
Result: 0

The method could be generalised to perform other kinds of terminal operations.

This is based loosely on this answer about a take-while operation.

I don't know anything about the parallelisation potential of this.

Answer 3

Unfortunately the Stream API has limited capabilities to create your own short-circuit operations. Not so clean solution would be to throw a RuntimeException and catch it. Here's the implementation for IntStream, but it can be generalized for other stream types as well:

public static int reduceWithCancelEx(IntStream stream, int identity, 
                      IntBinaryOperator combiner, IntPredicate cancelCondition) {
    class CancelException extends RuntimeException {
        private final int val;

        CancelException(int val) {
            this.val = val;
        }
    }

    try {
        return stream.reduce(identity, (a, b) -> {
            int res = combiner.applyAsInt(a, b);
            if(cancelCondition.test(res))
                throw new CancelException(res);
            return res;
        });
    } catch (CancelException e) {
        return e.val;
    }
}

Usage example:

int product = reduceWithCancelEx(
        IntStream.of(2, 3, 4, 5, 0, 7, 8).peek(System.out::println), 
        1, (a, b) -> a * b, val -> val == 0);
System.out.println("Result: "+product);

Output:

2
3
4
5
0
Result: 0

Note that even though it works with parallel streams, it's not guaranteed that other parallel tasks will be finished as soon as one of them throws an exception. The sub-tasks which are already started will likely to run till finish, so you may process more elements than expected.

Update: alternative solution which is much longer, but more parallel-friendly. It's based on custom spliterator which returns at most one element which is result of accumulation of all underlying elements). When you use it in sequential mode, it does all the work in single tryAdvance call. When you split it, each part generates the correspoding single partial result, which are reduced by Stream engine using the combiner function. Here's generic version, but primitive specialization is possible as well.

final static class CancellableReduceSpliterator<T, A> implements Spliterator<A>,
        Consumer<T>, Cloneable {
    private Spliterator<T> source;
    private final BiFunction<A, ? super T, A> accumulator;
    private final Predicate<A> cancelPredicate;
    private final AtomicBoolean cancelled = new AtomicBoolean();
    private A acc;

    CancellableReduceSpliterator(Spliterator<T> source, A identity,
            BiFunction<A, ? super T, A> accumulator, Predicate<A> cancelPredicate) {
        this.source = source;
        this.acc = identity;
        this.accumulator = accumulator;
        this.cancelPredicate = cancelPredicate;
    }

    @Override
    public boolean tryAdvance(Consumer<? super A> action) {
        if (source == null || cancelled.get()) {
            source = null;
            return false;
        }
        while (!cancelled.get() && source.tryAdvance(this)) {
            if (cancelPredicate.test(acc)) {
                cancelled.set(true);
                break;
            }
        }
        source = null;
        action.accept(acc);
        return true;
    }

    @Override
    public void forEachRemaining(Consumer<? super A> action) {
        tryAdvance(action);
    }

    @Override
    public Spliterator<A> trySplit() {
        if(source == null || cancelled.get()) {
            source = null;
            return null;
        }
        Spliterator<T> prefix = source.trySplit();
        if (prefix == null)
            return null;
        try {
            @SuppressWarnings("unchecked")
            CancellableReduceSpliterator<T, A> result = 
                (CancellableReduceSpliterator<T, A>) this.clone();
            result.source = prefix;
            return result;
        } catch (CloneNotSupportedException e) {
            throw new InternalError();
        }
    }

    @Override
    public long estimateSize() {
        // let's pretend we have the same number of elements
        // as the source, so the pipeline engine parallelize it in the same way
        return source == null ? 0 : source.estimateSize();
    }

    @Override
    public int characteristics() {
        return source == null ? SIZED : source.characteristics() & ORDERED;
    }

    @Override
    public void accept(T t) {
        this.acc = accumulator.apply(this.acc, t);
    }
}

Methods which are analogous to Stream.reduce(identity, accumulator, combiner) and Stream.reduce(identity, combiner), but with cancelPredicate:

public static <T, U> U reduceWithCancel(Stream<T> stream, U identity,
        BiFunction<U, ? super T, U> accumulator, BinaryOperator<U> combiner,
        Predicate<U> cancelPredicate) {
    return StreamSupport
            .stream(new CancellableReduceSpliterator<>(stream.spliterator(), identity,
                    accumulator, cancelPredicate), stream.isParallel()).reduce(combiner)
            .orElse(identity);
}

public static <T> T reduceWithCancel(Stream<T> stream, T identity,
        BinaryOperator<T> combiner, Predicate<T> cancelPredicate) {
    return reduceWithCancel(stream, identity, combiner, combiner, cancelPredicate);
}

Let's test both versions and count how many elements are actually processed. Let's put the 0 close to end. Exception version:

AtomicInteger count = new AtomicInteger();
int product = reduceWithCancelEx(
        IntStream.range(-1000000, 100).filter(x -> x == 0 || x % 2 != 0)
                .parallel().peek(i -> count.incrementAndGet()), 1,
        (a, b) -> a * b, x -> x == 0);
System.out.println("product: " + product + "/count: " + count);
Thread.sleep(1000);
System.out.println("product: " + product + "/count: " + count);

Typical output:

product: 0/count: 281721
product: 0/count: 500001

So while result is returned when only some elements are processed, the tasks continue working in background and counter is still increasing. Here's spliterator version:

AtomicInteger count = new AtomicInteger();
int product = reduceWithCancel(
        IntStream.range(-1000000, 100).filter(x -> x == 0 || x % 2 != 0)
                .parallel().peek(i -> count.incrementAndGet()).boxed(), 
                1, (a, b) -> a * b, x -> x == 0);
System.out.println("product: " + product + "/count: " + count);
Thread.sleep(1000);
System.out.println("product: " + product + "/count: " + count);

Typical output:

product: 0/count: 281353
product: 0/count: 281353

All the tasks are actually finished when the result is returned.