Give some command to View in MVVM

Question

Let\'s imagine I have some user control. The user control has some child windows. And user control user wants to close child windows of some type. There is a method in user

Answer 1

Most answers to this question involve a state variable that is controlled by the ViewModel and the View acts on changes to this variable. This is good for stateful commands like opening or closing a window, or simply showing or hiding some controls. It doesn't work well for stateless event commands though. You could trigger some action on the rising edge of the signal but need to set the signal to low (false) again or it won't ever trigger again.

I have written an article about the ViewCommand pattern which solves this problem. It is basically the reverse direction of regular Commands that go from the View to the current ViewModel. It involves an interface that each ViewModel can implement to send commands to all currently connected Views. A View can be extended to register with each assigned ViewModel when its DataContext property changes. This registration adds the View to the list of Views in the ViewModel. Whenever the ViewModel needs to run a command in a View, it goes through all registered Views and runs the command on them if it exists. This makes use of reflection to find the ViewCommand methods in the View class, but so does Binding in the opposite direction.

The ViewCommand method in the View class:

public partial class TextItemView : UserControl
{
    [ViewCommand]
    public void FocusText()
    {
        MyTextBox.Focus();
    }
}

This is called from a ViewModel:

private void OnAddText()
{
    ViewCommandManager.Invoke("FocusText");
}

The article is available on my website and in an older version on CodeProject.

The included code (BSD licence) provides measures to allow renaming methods during code obfuscation.

Answer 2

One way to achieve this would be for the view-model to request that the child windows should be closed:

public class ExampleUserControl_ViewModel
{
    public Action ChildWindowsCloseRequested;

    ...
}

The view would then subscribe to its view-model's event, and take care of closing the windows when it's fired.

public class ExampleUserControl : UserControl
{
    public ExampleUserControl()
    {
        var viewModel = new ExampleUserControl_ViewModel();
        viewModel.ChildWindowsCloseRequested += OnChildWindowsCloseRequested;

        DataContext = viewModel;
    }

    private void OnChildWindowsCloseRequested()
    {
        // ... close child windows
    }

    ...
}

So here the view-model can ensure the child windows are closed without having any knowledge of the view.

Answer 3

I feel I just found a rather nice MVVM solution to this problem. I wrote a behavior that is exposing a type property WindowType and a boolean property Open. DataBinding the latter allows the ViewModel to open and close the windows easily, without knowing anything about the View.

Gotta love behaviors... :)

Xaml:

<UserControl x:Class="WpfApplication1.OpenCloseWindowDemo"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
             xmlns:local="clr-namespace:WpfApplication1"
             xmlns:i="http://schemas.microsoft.com/expression/2010/interactivity"
             mc:Ignorable="d" 
             d:DesignHeight="300" d:DesignWidth="300">

    <UserControl.DataContext>
        <local:ViewModel />
    </UserControl.DataContext>
    <i:Interaction.Behaviors>
        <!-- TwoWay binding is necessary, otherwise after user closed a window directly, it cannot be opened again -->
        <local:OpenCloseWindowBehavior WindowType="local:BlackWindow" Open="{Binding BlackOpen, Mode=TwoWay}" />
        <local:OpenCloseWindowBehavior WindowType="local:YellowWindow" Open="{Binding YellowOpen, Mode=TwoWay}" />
        <local:OpenCloseWindowBehavior WindowType="local:PurpleWindow" Open="{Binding PurpleOpen, Mode=TwoWay}" />
    </i:Interaction.Behaviors>
    <UserControl.Resources>
        <Thickness x:Key="StdMargin">5</Thickness>
        <Style TargetType="Button" >
            <Setter Property="MinWidth" Value="60" />
            <Setter Property="Margin" Value="{StaticResource StdMargin}" />
        </Style>
        <Style TargetType="Border" >
            <Setter Property="Margin" Value="{StaticResource StdMargin}" />
        </Style>
    </UserControl.Resources>

    <Grid>
        <StackPanel>
            <StackPanel Orientation="Horizontal">
                <Border Background="Black" Width="30" />
                <Button Content="Open" Command="{Binding OpenBlackCommand}" CommandParameter="True" />
                <Button Content="Close" Command="{Binding OpenBlackCommand}" CommandParameter="False" />
            </StackPanel>
            <StackPanel Orientation="Horizontal">
                <Border Background="Yellow" Width="30" />
                <Button Content="Open" Command="{Binding OpenYellowCommand}" CommandParameter="True" />
                <Button Content="Close" Command="{Binding OpenYellowCommand}" CommandParameter="False" />
            </StackPanel>
            <StackPanel Orientation="Horizontal">
                <Border Background="Purple" Width="30" />
                <Button Content="Open" Command="{Binding OpenPurpleCommand}" CommandParameter="True" />
                <Button Content="Close" Command="{Binding OpenPurpleCommand}" CommandParameter="False" />
            </StackPanel>
        </StackPanel>
    </Grid>
</UserControl>

YellowWindow (Black/Purple alike):

<Window x:Class="WpfApplication1.YellowWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        Title="YellowWindow" Height="300" Width="300">
    <Grid Background="Yellow" />
</Window>

ViewModel, ActionCommand:

using System;
using System.ComponentModel;
using System.Windows.Input;

namespace WpfApplication1
{
    public class ViewModel : INotifyPropertyChanged
    {
        public event PropertyChangedEventHandler PropertyChanged;
        private void OnPropertyChanged(string propertyName)
        {
            if (this.PropertyChanged != null)
                PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
        }

        private bool _blackOpen;
        public bool BlackOpen { get { return _blackOpen; } set { _blackOpen = value; OnPropertyChanged("BlackOpen"); } }

        private bool _yellowOpen;
        public bool YellowOpen { get { return _yellowOpen; } set { _yellowOpen = value; OnPropertyChanged("YellowOpen"); } }

        private bool _purpleOpen;
        public bool PurpleOpen { get { return _purpleOpen; } set { _purpleOpen = value; OnPropertyChanged("PurpleOpen"); } }

        public ICommand OpenBlackCommand { get; private set; }
        public ICommand OpenYellowCommand { get; private set; }
        public ICommand OpenPurpleCommand { get; private set; }


        public ViewModel()
        {
            this.OpenBlackCommand = new ActionCommand<bool>(OpenBlack);
            this.OpenYellowCommand = new ActionCommand<bool>(OpenYellow);
            this.OpenPurpleCommand = new ActionCommand<bool>(OpenPurple);
        }

        private void OpenBlack(bool open) { this.BlackOpen = open; }
        private void OpenYellow(bool open) { this.YellowOpen = open; }
        private void OpenPurple(bool open) { this.PurpleOpen = open; }

    }

    public class ActionCommand<T> : ICommand
    {
        public event EventHandler CanExecuteChanged;
        private Action<T> _action;

        public ActionCommand(Action<T> action)
        {
            _action = action;
        }

        public bool CanExecute(object parameter) { return true; }

        public void Execute(object parameter)
        {
            if (_action != null)
            {
                var castParameter = (T)Convert.ChangeType(parameter, typeof(T));
                _action(castParameter);
            }
        }
    }
}

OpenCloseWindowBehavior:

using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Interactivity;

namespace WpfApplication1
{
    public class OpenCloseWindowBehavior : Behavior<UserControl>
    {
        private Window _windowInstance;

        public Type WindowType { get { return (Type)GetValue(WindowTypeProperty); } set { SetValue(WindowTypeProperty, value); } }
        public static readonly DependencyProperty WindowTypeProperty = DependencyProperty.Register("WindowType", typeof(Type), typeof(OpenCloseWindowBehavior), new PropertyMetadata(null));

        public bool Open { get { return (bool)GetValue(OpenProperty); } set { SetValue(OpenProperty, value); } }
        public static readonly DependencyProperty OpenProperty = DependencyProperty.Register("Open", typeof(bool), typeof(OpenCloseWindowBehavior), new PropertyMetadata(false, OnOpenChanged));

        /// <summary>
        /// Opens or closes a window of type 'WindowType'.
        /// </summary>
        private static void OnOpenChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
        {
            var me = (OpenCloseWindowBehavior)d;
            if ((bool)e.NewValue)
            {
                object instance = Activator.CreateInstance(me.WindowType);
                if (instance is Window)
                {
                    Window window = (Window)instance;
                    window.Closing += (s, ev) => 
                    {
                        if (me.Open) // window closed directly by user
                        {
                            me._windowInstance = null; // prevents repeated Close call
                            me.Open = false; // set to false, so next time Open is set to true, OnOpenChanged is triggered again
                        }
                    }; 
                    window.Show();
                    me._windowInstance = window;
                }
                else
                {
                    // could check this already in PropertyChangedCallback of WindowType - but doesn't matter until someone actually tries to open it.
                    throw new ArgumentException(string.Format("Type '{0}' does not derive from System.Windows.Window.", me.WindowType));
                }
            }
            else 
            {
                if (me._windowInstance != null)
                    me._windowInstance.Close(); // closed by viewmodel
            }
        }
    }
}

Answer 4

A reasonable way for purists is creating a service that handles your navigation. Short summary: create a NavigationService, register your view at the NavigationService and use the NavigationService from within the view model to navigate.

Example:

class NavigationService
{
    private Window _a;

    public void RegisterViewA(Window a) { _a = a; }

    public void CloseWindowA() { a.Close(); }
}

To get a reference to NavigationService you could make an abstraction on top of it (i.e. INavigationService) and register/get it via a IoC. More properly you could even make two abstractions, one that contains the methods for registration (used by the view) and one that contains the actuators (used by the view model).

For a more detailed example you could check out the implementation of Gill Cleeren which heavily depends on IoC:

http://www.silverlightshow.net/video/Applied-MVVM-in-Win8-Webinar.aspx starting at 00:36:30

Answer 5

I have handled this sort of situation in the past by bringing in the concept of a WindowManager, which is a horrible name for it, so let's pair it with a WindowViewModel, which is only slightly less horrible - but the basic idea is:

public class WindowManager
{
    public WindowManager()
    {
        VisibleWindows = new ObservableCollection<WindowViewModel>();
        VisibleWindows.CollectionChanged += OnVisibleWindowsChanged;            
    }
    public ObservableCollection<WindowViewModel> VisibleWindows {get; private set;}
    private void OnVisibleWindowsChanged(object sender, NotifyCollectionChangedEventArgs args)
    {
        // process changes, close any removed windows, open any added windows, etc.
    }
}

public class WindowViewModel : INotifyPropertyChanged
{
    private bool _isOpen;
    private WindowManager _manager;
    public WindowViewModel(WindowManager manager)
    {
        _manager = manager;
    }
    public bool IsOpen 
    { 
        get { return _isOpen; } 
        set 
        {
            if(_isOpen && !value)
            {
                _manager.VisibleWindows.Remove(this);
            }
            if(value && !_isOpen)
            {
                _manager.VisibleWindows.Add(this);
            }
            _isOpen = value;
            OnPropertyChanged("IsOpen");
        }
    }    

    public event PropertyChangedEventHandler PropertyChanged = delegate {};
    private void OnPropertyChanged(string name)
    {
        PropertyChanged(this, new PropertyChangedEventArgs(name));
    }
}

note: I'm just throwing this together very haphazardly; you'd of course want to tune this idea to your specific needs.

But anywho, the basic premise is your commands can work on the WindowViewModel objects, toggle the IsOpen flag appropriately, and the manager class handles opening/closing any new windows. There are dozens of possible ways to do this, but it's worked in a pinch for me in the past (when actually implemented and not tossed together on my phone, that is)