Unicode Characters in ggplot2 PDF Output

Question

How can I use Unicode characters for labels, titles and similar things in a PDF plot created with ggplot2?

Consider the following example:

library(gg         


        

Answer 1

If you are using ggsave(...), you can call ggsave(..., device=cairo_pdf).

You will need to first install and load the Cairo bindings.

install.packages("Cairo")
library(Cairo)

Here is a full example (not my work).

Answer 2

As Ben suggested, cairo_pdf() is your friend. It also allows you to embed non-postscript fonts (i.e. TTF/OTF) in the PDF via the family argument (crucial if you don't happen to have any postscript fonts that contain the glyphs you want to use). For example:

library(ggplot2)
cairo_pdf("example.pdf", family="DejaVu Sans")
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
dev.off()

...gives a PDF that looks like this:

See also this question; though it doesn't look directly relevant from the title, there is a lot in there about getting fonts to do what you want in R.

EDIT per request in comments, here is the windows-specific code:

library(ggplot2)
windowsFonts(myCustomWindowsFontName=windowsFont("DejaVu Sans"))
cairo_pdf("example.pdf", family="myCustomWindowsFontName")
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
dev.off()

To use the base graphics command cairo_pdf() it should suffice to just define your font family with the windowsFonts() command first, as shown above. Of course, make sure you use a font that you actually have on your system, and that actually has all the glyphs that you need.

TThe instructions about DLL files in the comments below are what I had to do to get the Cairo() and CairoPDF() commands in library(Cairo) to work on Windows. Then:

library(ggplot2)
library(Cairo)
windowsFonts(myCustomWindowsFontName=windowsFont("DejaVu Sans"))
CairoPDF("example.pdf")
par(family="myCustomWindowsFontName")
qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ")
dev.off()

Answer 3

As of 2020 and R version 4.0.3, cairo_pdf() is not your friend anymore on Mac OS X, at least as far as Cyrillic is concerned — See Fail Gallery below.

TL;DR

If you must have Cyrillic, just go back to good ole png driver. (And kiss your antialiased diagrams goodbye.)

R -e 'png(filename = "ftw.png"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open ftw.png

Or if you use Rmarkdown with knitr:

R -e 'rmarkdown::render("foo.Rmd", "pdf_document", output_file="foo.pdf", runtime = "static", output_options = list(dev = "png"))'

The Fail Gallery

The “modern” approach with Cairo fails in v4.0.3 as demonstrated below. Note that this is not (or not only) a font embedding or rendering problem, since selecting and pasting text out of the generated PDFs also produces garbled output.

Prep steps:

1. install the latest R (version 4.0.3 or higher, with all capabilities() showing TRUE)
2. R -e 'install.packages(c("Cairo", "ggplot2"), repos="https://cloud.r-project.org")'

Vanilla config

R -e 'library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); ggsave("fail1.pdf")'
open fail1.pdf

Using cairo_pdf() alone

R -e 'cairo_pdf("fail2.pdf"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open fail2.pdf

Using cairo_pdf() with a custom (supposedly Unicode-compliant) font

R -e 'cairo_pdf("fail3.pdf", family = "Arial Unicode MS"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open fail3.pdf

Another attempt with Comic Sans for good measure:

R -e 'cairo_pdf("fail3bis.pdf", family = "Comic Sans MS"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open fail3bis.pdf

A few more...

With the older "Dark and Stormy Night" version (3.6.2):

/Library/Frameworks/R.framework/Versions/3.6/Resources/bin/R -e 'cairo_pdf("fail4.pdf", family = "Arial Unicode MS"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open fail4.pdf

And with DejaVu Sans as suggested by @drammock:

R -e 'cairo_pdf("fail5.pdf", family = "DejaVu Sans"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open fail5.pdf

DejaVu Sans on older R:

/Library/Frameworks/R.framework/Versions/3.6/Resources/bin/R -e 'cairo_pdf("fail5bis.pdf", family = "DejaVu Sans"); library(ggplot2); qplot(Sepal.Length, Petal.Length, data=iris, main="Aʙᴄᴅᴇғɢʜɪᴊᴋʟᴍɴᴏᴘǫʀsᴛᴜᴠᴡxʏᴢ"); dev.off()'
open fail5bis.pdf