Little problem with AsyncUdpSocket receiving data after connecting to broadcast instead of server

Question

I have a problem with AsyncUdpSocket.

I used to connect to a server, send some data and get some response. Now since I do not know the actual address of the server I had

Answer 1

You are 'connecting' to the host. Per the Unix socket FAQ, this means you'll only get UDP packets back that have a source IP address of 255.255.255.255. Connecting establishes a 1-to-1 relationship for UDP, such that received packets whose source addresses differ from the connected address will be filtered.

If you don't connect (you'll have to change your send line to target the broadcast address), it should work. You'll send toHost:bcHost -- and then your receive should get all packets destined for its port.

Answer 2

Based on Arthur's answer, here's the working code. I'm wondering if receive should start before the send, just to make sure we don't miss a very fast reply before receive is ready, but so far it doesn't seem necessary in my situation. Also, reference this post on how to create receiving methods.

AsyncUdpSocket *udpSocket = [[AsyncUdpSocket alloc] initWithDelegate:self];
[udpSocket bindToPort:1234 error:nil ];
[udpSocket enableBroadcast:YES error:nil];

NSData* data=[messageToSend dataUsingEncoding:NSUTF8StringEncoding];

if ([udpSocket sendData:data toHost:@"255.255.255.255" port:4321 withTimeout:3 tag:0])
{
    //2 second timeout. onUdpSocket methods will provide results
    [udpSocket receiveWithTimeout:2 tag:0];
}

Answer 3

Ok, unfortunately all reply's do not work for me but I found the solution, finally ;)

NSString *bcHost = @"255.255.255.255";
NSString *anyHost = @"0.0.0.0";

int UDP_SOCKET_PORT =         6001;
int DISCOVERY_PORT  =       6003;

udpSocket = [[AsyncUdpSocket alloc] initWithDelegate:self];
[udpSocket bindToAddress:anyHost port:DISCOVERY_PORT error:nil];  
[udpSocket enableBroadcast:YES error:nil]; 
[udpSocket receiveWithTimeout:10 tag:0];
[udpSocket sendData:[@"Hello" dataUsingEncoding:NSASCIIStringEncoding] toHost:bcHost port:UDP_SOCKET_PORT withTimeout:-1 tag:0];

If there is an server behind it, it will trigger a response and this will also allow to get the ip from the server for further processing.

Answer 4

I could be completely crazy, but it seems like this is a standing issue with AsyncUdpSocket on iOS.

There's several error reports similar and even identical to yours on their Google Code page; people have complained that they are unable to receive Udp packets after broadcasting, and in some cases, even at all.

http://code.google.com/p/cocoaasyncsocket/issues/list?can=2&q=AsyncUdpSocket+receive