How to bind a Raw Socket to a specific port?

Question

I am currently working on a programming assignment. The assignment is to implement a client,network emulator, and server. The client passes packets to a network emulator, and th

Answer 1

I would think you're expected to filter the packets in your software. It sounds like the exercise is to learn what the different components of the IP stack do by recreating a simplified piece of it in user space. Normally in the kernel, the IP code would process all packets, verify the IP headers, reassemble fragments, and check the protocol field. If the protocol field is 17 (udp), then it passes it to the UDP code (every UDP packet). It's up to the UDP code to then validate the UDP header and determine if any applications are interested in them based on the destination port.

I imagine your project is expected to more or less mimic this process. Obviously none of it will be as efficient as doing it in the kernel, but since the assignment is to write (part of) an IP stack in user-space, I'd guess efficiency isn't the point of the exercise.

Answer 2

The man page for raw(7) says:

A raw socket can be bound to a specific local address using the bind(2) call. If it isn't bound all packets with the specified IP protocol are received. In addition a RAW socket can be bound to a specific network device using SO_BINDTODEVICE; see socket(7).

Edit: You cannot bind a raw socket to a specific port because "port" is a concept in TCP and UDP, not IP. Look at the header diagrams for those three protocols and it should become obvious: you are working at a lower level, where the concept of port is not known.